Sharif Digital Repository

In recent years, controlling the salinity and composition of the injected water has become an emerging enhanced oil recovery (EOR) technique, often described as low salinity (LS) waterflooding. This work is done with the intention to contribute to the ongoing discussions about LS waterflooding mechanism(s). For this purpose, a series of different experiments were conducted. At first, the effect of salinity on the interfacial tension (IFT) and the contact angle was evaluated with a crude oil sample. Then to achieve more accurate results in observing oil/water interface, similar IFT experiments were also carried out on a synthetic oil containing asphaltenes. Thereafter, microscopic... 

This study aims to investigate the role of fluid-fluid interactions during low salinity water flooding, using crude oil from an Iranian oil reservoir. To minimize the effects of mineral heterogeneity and wettability alteration, a synthetic sintered glass core was utilized and all coreflooding experiments were performed at low temperatures without any aging process. The effect of fluid-fluid interactions were investigated in both secondary and tertiary injection modes. pH measurements as well as UV-Vis spectroscopy and interfacial tension (IFT) analysis were performed on the effluent brine samples. Results: show that fluid-fluid interactions, mainly the dissolution of crude oil polar... 

Background: Cancer is the first cause of death in developed countries. The heterogeneous nature of cancer requires patient-specified treatment plans. One reliable approach is collecting Circulating Tumour Cells (CTCs) and using them for prognosis and drug response assessment purposes. CTCs are rare and their separation from normal cell requires high-accuracy methods. Methods: A microfluidic cell capture device to separate CTCs from peripheral blood is presented in this study. The CTC separation device applies hydrodynamic forces to categorize cells according to their sizes. The proposed device is designed and evaluated by numerical simulations and validated experimentally. The simulation... 

A solar natural vacuum desalination system was experimentally investigated. Using a barometric water column and creating an equilibrium with atmospheric pressure and gravity, vacuum conditions were maintained inside the evaporation chamber throughout the day, which led to the beginning of evaporation at lower temperatures and as a result, lower energy consumption compared to conventional methods. Solar evacuated tubes were used to more efficiently absorb solar radiation and raise the temperature of saline water. In addition, at the system startup, a vacuum pump was utilized to fill the water column and create vacuum conditions. Then, the existing vacuum in the system was maintained naturally... 

Dam construction in arid and semiarid regions is generally related to the risk of increased salinity, due to water passage in contact with salty formations. Hence, it is important to take reservoir thermal and salinity stratification into account in operational rules. In the present study, a simulation–optimization model was developed to determine the amount of water release from various outlets to discharge the brine from hypolimnion layer considering the downstream water quality limitations. The most appropriate time, rate, and concentration to release brine were determined based on water consumption conditions and downstream water demand and river ecology characteristics. The proposed... 

The thin brine film that wets rock surfaces governs the wettability of underground reservoirs. The ionic composition and salinity of this nanosized brine film influence the wetting preference of the rock pore space occupied by hydrocarbons. Despite numerous investigations over the last decades, a unanimous fundamental understanding that concerns the contribution of ions in the original wetting state of the reservoir is lacking and hence the mechanisms responsible for the wettability reversal of the mineral are still unclear. This wettability reversal is the main consequence of ion-Tuned waterflooding. Although the method is widely accepted in practice, there is no universal consensus on the... 

Deep wells suffer from the instability and disintegration of natural polymers and other commonly used additives under high pressure and high temperature condition. As a result, serious problems such as hydraulic loss, stuck pipe, and high torque and drag are expected to take place which leads to a dramatic increase in cost and time. This study presents the functionality of a novel synthetic based acrylamide-styrene copolymer (SBASC) as a supersede additive for water-based drilling mud. First, the SBASC was synthesized using an emulsion polymerization process and its particle morphological and polymer chain structural properties were determined by Field Emission Scanning Electron Microscopy... 

In this study, the theoretical investigation of a novel heat pump assisted humidification-dehumidification desalination system has been carried out. The conventional dehumidifier of the humidification-dehumidification system was removed and the evaporator of the heat pump was utilized for direct dehumidification of air. Besides, the heat pump condenser was used as the saline water heater of the humidification-dehumidification cycle. First, the sizes of the components were calculated at design conditions for fixed input operational conditions namely the ambient air temperature, relative humidity, and inlet saline water temperature. However, the input operating conditions vary at off-design... 

Desalination of sea saline water seems a successful solution to supply clean water. For desalination, novel nanoporous membranes have been proposed as a substitute for the classic reverse osmosis (RO) membranes. The one-atom-thick graphyne membrane has shown great potential in water desalination. By applying functional groups (FGs) into the pores of the monolayer graphyne membranes, the water permeability and the ion rejection were passively increased. The effects of applying various FGs such as Hydrogen, Fluorine, Carboxyl and Amine, effect of the salt concentration, the applied pressure, and the effective diameter of the graphyne pores were determined by molecular dynamics (MD)... 

Connate water has been coexisting with oil and mineral for centuries within underground reservoirs. The oil recovery techniques, such as low salinity water injection, disturb this prolonged equilibrium state of oil/brine/rock system. However, a thorough understanding of this complex equilibrium in the reservoir is still lacking. In this study, we performed molecular dynamics simulations to provide quantitative comprehension of the thin brine film characteristics that wets carbonate reservoir rocks at molecular level. While an electric double layer is formed at the interface of calcite/low salinity water, the ions in the high saline water form several aggregates of ions. We found that these... 

Smart water injection is recognized as an effective EOR process to alter the wettability and interfacial tension to obtain higher micro/macro sweep efficiencies. This water contains reactive ions such asMg2+, Ca2+ andSO42- which can act as potential-determining ions and change the surface charge of calcite rocks. One of the major concerns in the execution of an effective water-flood process, especially in tight carbonate reservoirs, is the chemical incompatibility between the formation brine and the injecting water. In the present study, laboratory fluid compatibility tests were carried out and software simulation was done to investigate the most important challenges of the water-flooding... 

Despite previous researches on ion-engineered waterflooding (IEWF), its underlying mechanisms are not fully understood, particularly in presence of additives, like surfactants. This paper concerned with the contribution of Ca 2+ , Mg 2+ , SO 4 2- and Na + into altering wettability of oil-wet carbonate minerals towards water preferred state. As a mechanistic study, an experiment workflow was conducted to probe the impact of ions' concentrations in SW, either with or without sodium dodecylbenzene sulfonate (SDBS) which is an anionic surfactant. At first, contact angle (CA) measurement was carried out to evaluate the degree of wettability reversal upon treating the oil-aged calcite slabs with... 

Extraction of thermal heat from a salinity-gradient solar pond (SGSP) as a way of accumulating solar energy, stockpiling and taking merit of it for medium and low temperature demands is presented as an interesting topic in recent decades. This reliable supply of heat can be used for low-temperature refrigeration systems to yield cooling load for residential applications. For this purpose, theoretical investigation of ejector refrigeration cycle (ERC) driven by a SGSP is carried out to produce cooling output. Also, thermoelectric generator (TEG) is used as a potential device replacing condenser of the ERC for the sake of bolstering performance of the fundamental system by producing power,... 

In this study we use polynomial chaos expansion (PCE) to perform uncertainty analysis for seawater intrusion (SWI) in fractured coastal aquifers (FCAs) which is simulated using the coupled discrete fracture network (DFN) and variable-density flow (VDF) models. The DFN-VDF model requires detailed discontinuous analysis of the fractures. In real field applications, these characteristics are usually uncertain which may have a major effect on the predictive capability of the model. Thus, we perform global sensitivity analysis (GSA) to provide a preliminary assessment on how these uncertainties can affect the model outputs. As our conceptual model, we consider fractured configurations of the... 

In this study, a review of the overlay/index methods served for delineation of vulnerable zones in coastal aquifers affected by SWI is provided. Then, a more realistic presentation of the vulnerability mapping of coastal aquifers to SWI through modified GALDIT index method by incorporating the influential factors on SWI is established. The modifications on GALDIT method including incorporating the seaward hydraulic gradient (i) instead of the height of groundwater level above sea level (L) (so-called GAiDIT), and considering hydraulic gradient (i) as an additional parameter to the GALDIT (so-called GALDIT-i). Three GALDIT, GAiDIT, and GALDIT-i methods were evaluated with data from three... 

During preliminary investigation phase of the national Chabahar-Zahedan railway line, serious geotechnical problems including non-uniform settlements, tensile cracks, and local collapse were reported in parts of the path near the coastline. A follow-up field investigation revealed that the in-situ soil at construction site has a metastable structure being sensitive to saturation and loading. Therefore, a comprehensive series of physical, chemical, electro-chemical, and geotechnical tests were conducted to classify and characterize the soil properties and behavior in its natural state. The natural soil was classified as a clayey loess with moderately dispersive to dispersive characteristics.... 

Various urban, industrial, and agricultural pollutions discharge more than river self-purification potential damages river ecosystem and increases water treatment costs. As different decision-makers and stakeholders are involved in the water quality management in river systems, a new bankruptcy form of the game theory is used to resolve the existing conflict of interests related to waste load allocation in downstream river. The river restoration potential can allocate to the conflicting parties with respect to their claims, by using bankruptcy solution methods. In this research, dischargeable pollution loads to Karun River are determined by pollution sources in various scenarios using... 

Optical signal propagation through underwater channels is affected by three main degrading phenomena, namely, absorption, scattering, and fading. In this paper, we experimentally study the statistical distribution of intensity fluctuations in underwater wireless optical channels with random temperature and salinity variations, as well as the presence of air bubbles. In particular, we define different scenarios to produce random fluctuations on the water refractive index across the propagation path and, then, examine the accuracy of various statistical distributions in terms of their goodness of fit to the experimental data. We also obtain the channel coherence time to address the average... 

Produced water (PW), water extracted along with oil, can cause important environmental challenges due to its high volume and salinity and is considered a key factor in the economic exploitation of oil fields. Therefore, making use of a cost-effective integrated system of wastewater treatment is a fundamental requirement in oil and gas industries. In this paper, the integrated PW treatment system is presented using superstructure-based mathematical optimisation methodology which is aimed at minimising the total annual cost. Two distinct scenarios of injection and reuse in industrial scale are considered to propose an efficient and optimal integrated system. The results show that, despite the... 

Although several investigations have studied the low-salinity water injection (LSWI) performance during the past decades, the effect of crude oil type on the interfacial tension (IFT) and wettability alteration is still in dark. In this regard, this study is aimed to obtain the thermodynamic energies including adhesion, cohesion and spreading coefficient during LSWI. To achieve this goal, IFT and static contact angle values of three different crude oils (i.e. light, medium and heavy) are measured as a function of sea water salinity. The obtained results revealed that the dilution of sea water can change the wettability of reservoir rock from oil wet state towards water wet state, while crude...