Sharif Digital Repository

The plasmonic effects of infiltrated silver (Ag) nanoparticles, with different contents, inside a nanostructured TiO2 film on the photovoltaic performance of dye-sensitized solar cells (DSSCs) are explored. The synthesized Ag nanoparticles are immobilized onto deposited TiO2 nanoparticles by a new strategy using 3-mercaptopropionic acid (MPA), a bifunctional linker molecule. Transmission electron microscope (TEM) images show that monodispersed Ag and polydispersed TiO2 nanoparticles have an average diameter of 12 ± 3 nm and 5 ± 1 nm, respectively. Moreover, Fourier transform infrared spectroscopy (FTIR) analysis reveals that Ag nanoparticles were successfully functionalized and capped with... 

Solution-processed quantum dots (QDs) have attracted significant attention for the low-cost fabrication of optoelectronic devices. Here, we synthesized PbS QDs via hot injection method and passivated the trap states by using short thiols and dopant elements for photovoltaic application. In order to study the effect of dopants on photovoltaic application, PbS QDs were doped by using three different cations: Cadmium, Calcium, and Zinc. We utilized Time resolvel Photoluminescence measurement to study the carriers lifetime for different samples and found that the carriers life time increases ∼80% by using Cd as a dopant compared with undoped sample. In addition, the results of J-V measurement... 

Challenging problems in the design and analysis of photovoltaic (PV) systems stem from the nonlinear current–voltage (I–V) characteristics of solar cells. This paper presents an analytical analysis based on a describing function method to investigate the transient and steady-state characteristics of a three-phase single-stage grid-connected PV system. In this study, the nonlinear I–V characteristic of the PV array is linearized around the operating point. The nonlinear dynamic of the maximum power point tracking controller is divided into two parts of continuous and discrete. For the continuous part, the common small-signal linearization is applied, while for the discontinuous part, a... 

Herein, we report a double-layer photoanode electrode composed of TiO2 nanoparticles active layer and a mixture of nanoparticles and newly proposed skein-like nanotubes (NTs) top layer. Such structure performs well in solar light harvesting due to first, the top layer exhibits superior light scattering and second, the active layer with high dye-loading can make better use of the back-scattered light. The results reveal that 30-40 nm nanoparticles have anatase structure, whereas 5-7 μm skein-like NTs show a mixture of anatase and rutile phases. Photovoltaic measurements demonstrate that by tuning mass ratio between nanoparticles and skein-like NTs, the cells based on single-layer photoanode... 

In the present work, effects of height, length, and width of a single-slope basin-type solar still on its distillate production was investigated. For this purpose, a radiation model was developed which accounts for the influences of all walls on quantities of received solar radiation by the base and saline water of the still. Moreover, in this radiation model, the side walls of the still were considered as the trapezoid and the diffuse as well as beam components of solar irradiance were separately taken into account for the first time. Abilities of the present model were compared with earlier ones. Furthermore, the predictions of the current model were compared with the present experimental... 

In common solar stills, a portion of the produced vapor undesirably condenses on the sidewalls and runs down to be mixed with saline water in the basin. This results in lower distillate output of the system. The aim of this study was to improve the condensation process of a solar still without complicating its structure to collect the water condensed on sidewalls. The proposed solar still was made of two containers nested one inside the other such that the smaller container, containing saline water, fitted easily into the larger container. There was a thin gap between the two in which condensed liquid on sidewalls, ran down and was collected from the bottom of the larger container. The... 

Enhancing stability against photocorrosion and improving photocurrent response are the main challenges toward the development of cupric oxide (CuO) based photocathodes for solar-driven hydrogen production. In this paper, stable and efficient CuO-photocathodes have been developed using in situ materials engineering and through gold-palladium (Au-Pd) nanoparticles deposition on the CuO surface. The CuO photocathode exhibits a photocurrent generation of ∼3 mA/cm2 at 0 V v/s RHE. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis and X-ray spectroscopy (XPS) confirm the formation of oxygen-rich (O-rich) CuO film which demonstrates a highly stable photocathode with retained... 

The techno-economic and environmental performance of hybrid solar hydrogen energy systems was investigated to provide combined cooling, heating and power (CCHP) demands of a standalone greenhouse in Iran to achieve sustainable agriculture based on an optimization procedure. From the environmental point of view, by deploying hybrid energy systems, 83%, to 100% of emissions can be avoided. Also a sensitivity analysis was performed on the hybrid energy systems in order to study the effect of major parameter variation on the systems justification. It was concluded that hybrid solar systems are economically competitive with conventional systems, for high solar intensity locations with high diesel... 

Distributed generation (DG) units are often interfaced to the main grid using power electronic converters including voltage-source converters (VSCs). A VSC offers dc/ac power conversion, high controllability, and fast dynamic response. Because of nonlinearities, uncertainties, and system parameters’ changes involved in the nature of a grid-connected renewable DG system, conventional linear control methods cannot completely and efficiently address all control objectives. In this paper, a nonlinear adaptive control scheme based on adaptive backstepping strategy is presented to control the operation of a grid-connected renewable DG unit. As compared to the popular vector control technique, the... 

Today, energy crises attracted many researchers’ attention to renewable energy technologies especially photovoltaic (PV) systems. The main challenge of PV systems is unpredictable nature of solar power generation. To overcome this challenge, a storage system is integrated which reduces demand reliance on electricity grid and uses excess energy that solar panels produce. As investment cost of the storage system is considerable, finding an optimal technology, size, and configuration are crucial. In this paper, the optimal battery system is excluded from existing PV plant installing in a commercial building located in Mashhad/Iran. Here, the sizing procedure is based on a financial evaluation...