Sharif Digital Repository

In this work, an exergy analysis is performed for the waste heat recovery section (WHRS) of the steam-natural gas reforming (SNGR) process as a major energy intensive process. Two alternate conditions are investigated to evaluate the required thermodynamic parameters: normal operating condition and increase of C2+ components in the process feed stream. At normal operating condition, the exergy efficiency of WHRS amounts to 0.58 while some 17.2 kJ energy is destructed for each mole of H2 produced. If heavier than methane components are increased in the feed up to 8.5 mole %, despite the increase of H2 production, the exergy efficiency decreases down to 0.54... 

Application of solar energy compared to conventional gas-burning boilers for steam generation in thermal Enhanced Oil Recovery processes is a newly attended technology, which brings significant benefits to the petroleum industry through environmental and economical aspects. This technique is especially designed for the regions in which gas-burning steam generation is not viable in large scale. The objective of this study is to investigate about viability of using solar energy to generate steam instead of using conventional steam generators in a Venezuelan extra heavy oil reservoir. Limited gas production policy of the Venezuelan government is the major challenge for utilizing gas steam... 

The present study aims to analyze a combined heat and power (CHP) system with an approach towards exergy analysis and employing biomass gasification. The cycle modeling was carried out using Cycle-Tempo and the main purpose was to achieve parametric analysis of the model. The systems function was studied by categorizing alternative biomass fuels, also qualitative and quantitative analyses of the biomass fuel samples were presented and considering the trade-off points, most appropriate biomass fuel with respect to exergy efficiency and delivered power were determined. The results indicated that the bagasse and wood chips had the total exergy efficiency of 54.5 and 57.1% in trade-off point,... 

In this paper, a novel method of retrofit design in total site cogeneration systems based on constructal theory is presented. In this regard, the total site cogeneration system is decomposed into three constructs: turbines, turbine arrays, and steam generators. The objective function to be minimised is the total annual cost of existing total site. Using constructal theory simplifies the optimisation procedure of total site in addition to reaching better conceptual design especially in more sophisticated systems. A case study from literatures has been taken up to examine the applicability of the algorithm and excellent agreement has been observed. Copyright  

The aim of this contribution is to evaluate the performance of an expanding solvent steam assisted gravity drainage (ES-SAGD) process in naturally fractured systems. Steam-assisted gravity drainage (SAGD) and ES-SAGD processes have been investigated in both conventional and fractured reservoir models and the effect of networked fractures on the recovery mechanism and performance of ES-SAGD has been investigated. Operational parameters such as steam quality, vertical distances between wells, and steam injection temperature have been also evaluated. Finally, to study the effect of a well's horizontal offset, a staggered ES-SAGD well configuration has been compared to a stacked ES-SAGD  

The supplementary firing is one of the techniques which are used to increase the output power of the combined cycle power plants (CCPP). The low construction cost per generated power encourages designers to consider it in the new CCPP. In this paper the thermal and exergy analyses of HRSG for various operating conditions in variation of loads and variation of ambient temperature carried out. They are based on the performance test data at different operating conditions. The objective of these analyses is to present the effects of supplementary firing on gross power output, combined cycle efficiency and the exergy loss in Heat Recovery Steam Generator (HRSG) devices at different ambient... 

This paper considers the modeling and control of a tubular fixed bed reactor with recycle stream for dimethyl ether (DME) production. For simulation purposes, a pseudo homogeneous model has been developed. By reactor simulation under steady state condition, effects of parameters such as feed rate, pressure and shell temperature are investigated. Using the steady state model, an optimizer that maximizes the reactor yield has been developed. For cooling the reactor, a steam drum that uses heat of reactions to produce steam was coupled with the reactor. Through dynamic simulation, system open loop response was obtained and two control loops were considered for controlling the reactor... 

Stable control of water level of drum is of great importance for economic operation of power plant steam generator systems. In this paper, a linear model of the boiler unit with time varying parameters is used for simulation. Two transfer functions between drum water level (output variable) and feed-water and steam mass rates (input variables) are considered. Variation of model parameters may be arisen from disturbances affecting water level of drum, model uncertainties and parameter mismatch due to the variant operating conditions. To achieve a perfect tracking of the desired drum water level, two sliding mode controllers are designed separately. Results show that the designed controllers... 

A gas-turbine cogeneration system with a regenerative air preheater and a single-pressure exhaust gas boiler serves as an example for application of CHP Plant. This CHP plant which can provide 30 MW of electric power and 14kg/s saturated steam at 20 bars. The plant is comprised of a gas turbine, air compressor, combustion chamber, and air pre-heater as well as a heat recovery steam generator (HRSG). The design Parameters of the plant, were chosen as: compressor pressure ratio (rc), compressor isentropic efficiency (ηac), gas turbine isentropic efficiency (ηgt), combustion chamber inlet temperature (T3), and turbine inlet temperature (T4). In order to optimally find the design parameters a... 

This paper deals with development and qualification of a nodalization for modeling of the PSB-VVER integral test facility (ITF) by RELAP5/MOD3.2 code and prediction of its primary and secondary systems behaviors at steady state and transient conditions. The PSB-VVER is a full-height, 1/300 volume and power scale representation of a VVER-1000 NPP. A RELAP5 nodalization has been developed for PSB-VVER modeling and a nodalization qualification process has been applied for the developed nodalization at steady state and transient levels and a qualified nodalization has been proposed for modeling of the PSB ITF. The 11% small-break loss-of-coolant-accident (SBLOCA), i.e. rupture of one of the... 

Production of highly viscous tar sand bitumen using Steam Assisted Gravity Drainage (SAGD) with a pair of horizontal wells has advantages over conventional steam flooding. This paper explores the use of Artificial Neural Networks (ANNs) as an alternative to the traditional SAGD simulation approach. Feed forward, multi-layered neural network meta-models are trained through the Back-Error-Propagation (BEP) learning algorithm to provide a versatile SAGD forecasting and analysis framework. The constructed neural network architectures are capable of estimating the recovery factors of the SAGD production as an enhanced oil recovery method satisfactorily. Rigorous studies regarding the hybrid... 

Direct steam generation (DSG) in parabolic trough collectors causes an increase to competitiveness of solar thermal power plants (STPP) by substitution of oil with direct steam generation that results in lower investment and operating costs. In this study the integrated solar combined cycle system with DSG technology is introduced and techno-economic assessment of this plant is reported compared with two conventional cases. Three considered cases are: an integrated solar combined cycle system with DSG technology (ISCCS-DSG), a solar electric generating system (SEGS), and an integrated solar combined cycle system with HTF (heat transfer fluid) technology (ISCCS-HTF).This study shows that... 

The first control action in power system restoration concerns the generation restart. In the initial phase of restoration, operators are often concerned with load pickup problems. One of the important problems during load pickup is keeping frequency response in allowable range. The aim of this paper is to determine the best sequence of load pickup by hydro and steam units during power system restoration based on frequency response of prime movers. Hydro power plants and combustion turbine units have the capability of black start operation and can be used for early stages of power system restoration. This paper considers hydro power plants for evaluating the stability and frequency response... 

Mechanical alloying and hot extrusion techniques were employed to produce in-situ fully dens Al-Ti composites without applying any heat treatment. The focus of this study is the investigation of fracture toughness in produced composites in order to improve it and to explain the mechanisms responsible for the fracture. The morphology of milled powders was studied by Scanning Electron Microscopy (SEM). The microstructure of the extruded composites was examined by Optical Microscopy (OM) and Field Emission Scanning Electron Microscopy (FESEM). Moreover, the density and hardness of samples were investigated. Three point bending test of the single edge notched beam (SENB) samples was applied to... 

Design and optimization of centrifugal compressors, based on main blades configuration of impeller have been vastly discussed in open literature, but less researches have addressed splitters. In this research, the impeller of a commercial turbocharger compressor is investigated. Here, profiles of main blades are not changed while the effect of changing the configuration of splitters is studied. An optimization study is performed to find the best configuration using genetic algorithm over a complete operating curve of the compressor. CFD codes with experimental support are used to predict the compressor performance. Quantumetric tests beside destructive analysis of two impellers are... 

Gas injection process for more oil recovery and in particular CO2 injection is well-established method to increment oil recovery from underground oil reservoirs. CO2 sequestration which takes place during this enhanced oil recovery (EOR) method has positive impact on reducing the greenhouse gas emission which causes global warming. Direct gas injection into depleted oil reservoirs, encounters several shortcomings such as low volumetric sweep efficiency, early breakthrough (BT) and high risk of gas leakage in naturally fractured carbonate oil reservoirs. Carbonated water injection (CWI) has been recently proposed as an alternative method to alleviate the problems associated with gas... 

In order to achieve the international climate goals and to keep the global temperature increase below 2 °C, carbon capture and storage in large point sources of CO2 emissions has received considerable attention. In recent years, mitigation of CO2 emissions from the power sector has been studied extensively whereas other industrial point source emitters such as hydrogen industry have also great potential for CO2 abatement. This study aims to draw an updated comparison between different hydrogen and power cogeneration systems using natural gas and coal as feedstock. The goal is to show the relative advantage of cogeneration systems with respect to CO2 emission reduction costs. Accordingly, the... 

The application of the renewable energy sources, especially solar energy, for thermal enhanced oil recovery methods as an economical and environmental valuable technique has received many attractions recently. Concentrated Solar Power systems are capable of producing substantial quantities of steam by means of focused sunlight as the heat source for steam generation. This paper aims to investigate viability of using this innovative technology in fractured reservoirs to generate steam instead of using conventional steam generators. A synthetic fractured reservoir with properties similar to those of giant carbonate oil reserves in the Middle East was designed by using commercial thermal... 

A catalytic membrane reactor was synthesized by coating a 4-5 micron thick Ni/γ-Al2O3 layer on top of a hydrogen selective SiO2/Al2O3 composite membrane using a sol-gel method. Mercury intrusion and BET analysis indicated a uniform size distribution with an average pore size of 285 nm and average surface area of 279 m2 g-1. Single-component permeation tests were carried out for H2, CH4 and CO2 in the temperature range of 650-800 °C and the results showed the same permeance and selectivity values for hydrogen as the composite membrane without a catalytic layer. Performance of the catalytic membrane was evaluated by using as a membrane reactor for the methane steam reforming reaction with a...