Sharif Digital Repository

The chemical modification of isotactic polypropylene was performed by the free-radical-promoted grafting of 1,1,1-trimethylolpropane trimethacrylate (TMPTMA) in the presence of dicumyl peroxide (DCP) as the initiator. The reaction was carried out both in a batch internal mixer and in a corotating twin-screw extruder; the effects of the peroxide and monomer concentrations on the extent of modification in terms of the grafting efficiency and polymer chain structure variations were investigated. The modified samples were characterized with Fourier transform infrared to determine the structure of the grafted groups and the degree of functionalization, with gel permeation chromatography and the... 

The aim of this study was to investigate the thermal behavior of Mg-doped calcium phosphate compounds. Nanocrystalline HA and β-TCP mixtures containing different magnesium contents were synthesized via an alkoxide sol gel method. The ratio of (Ca+Mg)P was kept constant at 1.67, and the Mg content ranged between 0 and 3 mol%. The influence of magnesium on the phase composition, chemical structure, thermal behavior and morphological characteristics of nanopowders was analyzed using X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Simultaneous Thermogravimetry and Differential Thermal Analysis (STA/DTA), Scanning Electron Microscopy (SEM) and Transmission Electron... 

In this research, an attempt was made to improve TiO2 photo-catalyst properties, thus pure, N-Ce co-doped TiO2 thin films were prepared on glass-ceramic substrate using a sol-gel dip-coating technique. The samples were calcinated in air at 475 °C, 550°C, and 650°C for 2 h. The result of simultaneous thermal analysis (STA) and X-ray diffraction (XRD) showed that the presence of Ce in TiO2 could inhibit the phase transformation from anatase to rutile and enhance the thermal stability, and anatase was the dominant phase in N-Ce co-doped TiO2 samples. Also based on the results, the doping results in decreasing the size of TiO 2 crystallite. The results of ultra violet-visible light diffuse... 

Recently, nanodiamonds have attracted interest in biomedical applications such as drug delivery, targeted cancer therapies, fabrication of tissue scaffolds, and biosensors. We incorporated diamond nanoparticles in alginate-bioactive glass films by electrophoretic process to prepare functional coatings for biomedical implants. Turbidity examination by time-resolved laser transmittance measurement revealed that a stable multi-component aqueous suspension of alginate, bioactive glass and diamond particles could be obtained at concentrations of 0.6, 1.3, and 0.65 g/l, respectively. Uniform films with ~ 5 μm thickness were deposited on 316 stainless steel foils by employing constant field... 

SiO2-CaO-MgO glass and glass-ceramic powder doped with Nd 3+ were synthesized with sol-gel method. Tetraethylorthosilicate (TEOS), Ca(NO3)2·4H2O, Mg(NO 3)2·6H2O, Nd(NO3) 3·6H2O, ethanol, distilled water, and HNO 3 were used as starting materials. The synthesized powder's properties were examined with simultaneous thermal analysis (STA), X-ray diffraction (XRD), photoluminescence (PL) and scanning electron microscopy (SEM) analysis. The STA curves showed that the softening point and crystallization temperatures were shifted to higher temperatures with increasing dopant content. Regarding XRD patterns of glass samples, Nd was found to act as an intermediate oxide in glass matrix. The XRD... 

NaY zeolite nanoparticles were synthesized and shaped into the uniform spherical granules using a developed novel and simple two-step granulation technique. First, the alginate/nanozeolite or alginate/nanozeolite-bentonite spherical hybrid was successfully fabricated, and then the alginate was decomposed by calcinations resulting uniform spherical granules. To improve the mechanical stability of the prepared granules, bentonite was added as an inorganic binder at different ratios of 20wt.% to 40wt.%. Moreover, the effect of binder on the ion exchange properties of the prepared granules was studied. Increasing of binder content from 20wt.% to 40wt.% linearly enhanced the mechanical stability... 

Pb(Zr 0.52Ti 0.48)O 3 (PZT) nanotubes with diameters of 80-100 nm and a wall thickness of 15-20 nm were prepared by sol-gel template technique and using multi-walled carbon nanotubes (MWCNT) as sacrificial templates. The coating process of MWCNT with PZT precursor sol and removal of the carbon nanotubes by an interrupt heat treatment were discussed and studied by Raman spectroscopy. Simultaneous thermal analysis (STA) revealed that PZT nanotube crystallized at the low temperature of 410°C by the significantly low activation energy of crystallization of 103.7 kJ/mol. Moreover, based on the X-ray diffraction (XRD) pattern and selected area electron diffraction pattern the crystal structure of... 

SAPO-34 zeolite-like particles were successfully synthesized at high temperature environment. An L9 orthogonal array of the Taguchi method was implemented to investigate the effects of experimental conditions to prepare SAPO-34 with respect to crystallinity of the final product phase. The results showed that the favorable phase crystallinity was improved by increasing the hydrothermal synthesis temperature and organic template content, whereas increasing the water content in synthesis mixture decreased the crystallinity. No significant changes in crystallinity of the final products were observed by increasing the synthesis duration. In addition, zeolite SAPO-5, which was formed as the... 

The crystallization behavior of fluorphlogopite, a glass-ceramic in the MgO-SiO2-Al2O3-K2O-B 2O3-F system, was studied by substitution of Li 2O for K2O in the glass composition. DTA, XRD and SEM were used for the study of crystallization behavior, formed phases and microstructure of the resulting glass-ceramics. Crystallization kinetics of the glass was investigated under non-isothermal conditions, using the formal theory of transformations for heterogeneous nucleation. The crystallization results were analyzed, and both the activation energy of crystallization process as well as the crystallization mechanism were characterized. Calculated kinetic parameters indicated that the appropriate... 

Cellulose nanowhiskers (CNWs) prepared via TEMPO mediated oxidation are used as biodegradable filler in an epoxy matrix. Since CNWs are hydrophilic and epoxy is hydrophobic, amphiphilic block copolymer surfactants are employed to improve the interactions between the filler and the matrix. The surfactants used are Pluronics, a family of triblock copolymers containing two poly(ethylene oxide) blocks and one poly(propylene oxide) block. In this study, Pluronic L61 and L121 with molecular weight of 2000 and 4400 g/mol and hydrophilic to lipophilic balance of 3 and 1 respectively, are used and their effect on the dispersion of CNWs in epoxy is discussed. The hydrophilic tails of Pluronics... 

Nanostructured CoTiO3 thin films and powders were prepared by a straightforward aqueous particulate sol–gel route. Titanium(IV) isopropoxide and cobalt chloride were used as titanium and cobalt precursors, respectively. Also, hydroxypropyl cellulose was used as a polymeric fugitive agent in order to increase the specific surface area. The effect of Co:Ti molar ratio and annealing temperature were studied on the crystallization behavior and chemical properties of the products. X-ray diffraction and Fourier transform infrared spectroscopy revealed that the powders crystallized at the low annealing temperature of 300 °C for 1 h, containing anatase-TiO2,... 

Abstract In this study, aluminium titanate (AT) particles and nanofibers were synthesized through citrate sol gel and sol gel-assisted electrospinning methods in both nanostructured powder and nanofiber forms. The results of X-ray diffraction analysis, field-emission scanning electron microscopy and differential thermal analysis showed that the synthetic products benefit a nanostructured nature with a grain size less than 70 nm. The optimal values for time and temperature at which a roughly pure AT is attained were determined as 2 h and 900 C, respectively. It was found that the sol gel precursor bears an amorphous structure till 700 C and begins to be crystallized to alumina, anatase and AT... 

Weak mechanical possession is one of the limiting factors in application of hydrogels. To modify this inherent disadvantage, different approaches have been studied including synthesizing interpenetrating polymer network (IPN) and nanocomposite hydrogels. So, this study has focused on preparation of a novel full-IPN structure based on anionic monomers of 2-acrylamido-2-methylpropane sulfonic acid/acrylic acid-sodium acrylate via facile solution polymerization technique in an aqueous media with incorporation of graphene oxide (GO) nanosheets. Mechanical performance of materials in the "as-prepared condition" and "swollen state" was characterized via tensile, compression, and rheology tests,... 

Barium strontium titanate (BST) was prepared via the simple sol-gel method by using tetrabutyl ti-tanate, ethanol, citric acid and ethylene glycol as starting materials. Thermogravimetry and differential thermal analysis were used to examine the behaviour of the xerogel. The particle size of BST was approximately 21 nm, as calculated by the X-ray diffraction and confirmed by transition electron microscopy for the calcination temperature of 750 °C. It was found that the particles of BST powders calcined at 750 °C were smaller and more homogeneous and uniform than those obtained at 800 °C  

In the present work, synthesis and swellability of acrylatedstarch-based hydrogels was investigated. Acrylic groups were introduced onto starch backbone by a homogeneous synthesis to produce starch monomers with three different degree of substitution (DS). The radical copolymerization of acrylatedstarch (AST) with acrylic acid (AA) and acrylamide (AAm) was carried out in aqueous solution using ammonium persulfate (APS) as an initiator. Infrared spectroscopy (FT-IR) and TGA thermal analysis were carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was examined by scanning electron microscopy (SEM). Their equilibrium swelling degree was evaluated... 

In this study, Li2O-TiO2-P2O5-x(Fe2O3) (x = 0, 2.5, 5 and 7.5 weight part) glass and glass-ceramics were synthesized through conventional melt-quenching method and subsequently heat treatment. Glass samples were studied by UV–visible spectroscopy and crystallized samples were characterized by differential thermal analysis, X-ray diffractometry and field emission scanning electron microscopy. Besides, electrical properties were examined according to the electrochemical impedance spectroscopy techniques. Experimental optical spectra of the Fe2O3-doped glasses revealed strong UV absorption band in the range of 330–370 nm, which were attributed to the presence of Fe3+ ions. The major crystalline... 

Two series of heat-resistant 25Cr-35Ni-Nb stainless steels with tungsten addition and Nb/C ratio of ≈2.6 and 3.9 were directionally solidified under two cooling rates of 23–6 °C s−1, respectively. EDS analysis, electron backscatter diffraction (EBSD), differential thermal analysis (DTA) and field emission scanning electron microscopy (FESEM) tests were carried out to show that tungsten as a carbide phase nucleant promoted weak coupled eutectic growth of γ/ M7C3 and decreased the lamellar eutectic colonies. Substantial negative segregation of Ni and Fe and positive segregation of Nb and Cr in tungsten-bearing alloys stimulated the γ/M23C6 reaction and the M23C6 possessed a dendritic... 

This work presents the catalytic graphitization process of phenolic resins (PR's) by addition of in situ nano-Fe particles as catalyst. Pyrolysis treatments of prepared compositions including various contents of nano-Fe particles were carried out at 600–1200 °C for 3 h under reducing atmosphere and graphitization process were evaluated by different techniques such as X-Ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), High Resolution Transmission Electron Microscopy (HRTEM), Simultaneous Thermal Analysis (STA) and Raman spectroscopy that mainly performed to identify the phase and microstructural analysis, oxidation resistance and extend of graphitized carbon...