Sharif Digital Repository

Thermal performance of a novel sintered wick heat pipe was investigated in this study. Two types of sintered wick heat pipes were fabricated and tested at different filling ratios of water, and their thermal resistances in different modes were compared. In the first type, wick was sintered annularly (conventional type), and in the other one (novel type of sintered wick) it was sintered only in one third of cross-section. Results showed that dry-out occurs at higher heat input by an increase in the filling ratio. Moreover, the best filling ratio is 20% for both heat pipes. Thermal resistances of the partly sintered wick heat pipe are approximately 28%, 17% and 47% lower than those of the... 

Heat pipes are important cooling devices that are widely used to transfer high heat loads with low temperature differences. In this paper, thermal performance of a novel type of sintered-wick heat pipe, namely, partly sintered-wick heat pipe, was investigated. The heat pipe was filled with degassed water and acetone, as working uids, and effects of filling ratio, orientation, and heat inputs were tested. Moreover, conditions at which dryout occurred were presented. The results showed that the best filling ratio for both working uids is about 20%. The heat pipe filled with water has better thermal performance than that filled with acetone; thus, the thermal resistances of the 20% water-filled... 

This paper simulates Al2O3-water nanofluid flow and forced convection around a rotating circular cylinder. The governing parameters are Reynolds number (1 ≤ Re ≤ 100), solid volume fraction of nanoparticles (0 ≤ φ ≤ 0.05) and non-dimensional rotation rate (0 ≤ α ≤ 3). The simulations are performed to study the effects of mentioned parameters on the heat transfer rate and fluid flow characteristics. The governing equations including the continuity, momentum, and energy equations are solved with a finite volume method. It is observed that the reduction of heat transfer with increase in rotation rate is in the vicinity of 6.9% and 32% for Re = 5 and 100, respectively at φ = 0.05. Furthermore,... 

Standpoints about atrium design have been revolutionized. Nowadays, design of atrium is not only for shine of light, but is also for natural ventilation as well. In high rise building, residents have not a same advantage of buoyancy-driven ventilation that arising from existence of atrium. One strategy to more equalize ventilation and thermal comfort in different levels, is designing building with various opening area in different heights. Present study aims to overcome the problem by changing the atrium shape. Thus, the atrium's wall angularity is changed in different case studies and these shapes are compared with each other in order to find the relations between atrium wall angularity and... 

This work is dedicated to finding a suitable measure to judge thermal performance of nanofluids. The importance of this issue arises from misleading claim of excess heat transfer of nanofluids compared to the base fluid, neglecting the hydraulic effects such as increase in pressure drop. To clarify the issue, the experimental setup with capability to create constant Reynolds number and constant pumping power is constructed. Thermal behavior of nanofluids of silicon oxide/water and aluminum oxide/water and distilled water in developing region of laminar flow regime is investigated. In this regard, the convective heat transfer coefficient within the finned tube heat exchanger is evaluated.... 

Electrical efficiency of photovoltaic (PV) modules depends on their working temperature. Effective cooling is required in order to achieve higher performance. Pulsating heat pipes (PHPs) are compact heat transfer devices with high effective thermal performance due to the two-phase heat transfer mechanism. Since the lower temperature of PV modules leads to higher electricity generation and better efficiency, PHPs can be applied for PV cooling. In this work, the PV cooling by applying a single turn PHP is numerically investigated. In addition, a copper fin with the same dimensions as the PHP for cooling the PV panel is simulated to compare the performance of the PHP with a solid metal like... 

Pulsating heat pipes are cooling devices that are partially filled with working fluid. Working fluid thermophysical properties affect the thermal performance of pulsating heat pipes. In this research, the effect of adding a Triton X-100 surfactant to pure water and using the mixture as a working fluid is investigated experimentally. The results indicate that adding surfactant leads to improvement in the thermal performance of the pulsating heat pipe. In particular, the maximum of the thermal resistance improvement is about 61%, which is attributed to 0.01% surfactant concentration. Higher heat transfer ability is attributed to lower surface tension and the contact angle of the mixture... 

Pulsating heat pipe (PHP) is a type of wickless heat pipe that has a simple structure and an outstanding thermal performance. Nanofluid is a type of fluid in which nanoparticles are dispersed in a base fluid and have generally a better thermal conductivity in comparison with its base fluid. In this article, the performance of a nanofluid PHP is investigated. Graphene/water nanofluid with a concentration of 1 mg mL−1 and TiO2 (titania)/water nanofluid with a concentration of 10 mg mL−1 are used as the working fluids. To simultaneously investigate the thermal performance and flow regimes in the PHP, a one-turn copper PHP with a Pyrex glass attached to its adiabatic section is used. A one-turn... 

Pulsating heat pipes (PHPs) are heat transfer devices which are widely utilized in electronic devices and energy systems. Improvement in thermal performance of PHPs will lead to higher heat transfer capacity and enhancement in the efficiency of systems which PHPs are applied. In this study, an experimental investigation was performed on the thermal performance of a pulsating heat pipe by applying graphene oxide nanofluid as working fluid. Four concentrations of graphene oxide (0.25, 0.5, 1, and 1.5 g/lit) in water as base fluid were used in the PHP. Results indicate that adding graphene oxide sheets increased thermal conductivity and viscidity of the base fluid. Moreover, utilizing graphene... 

In this study, we simulate the thermal behavior of a kerosene-fired oxy-fuel burner. To do this, the velocity of pure oxygen is suitably changed to achieve variable-mixing of fuel and oxidizer. Before the simulation procedure, a number of primitive steps are taken to evaluate the selected numerical approaches and methods. In other words, we simulate the turbulent non-premixed kerosene–air flame confined in a combustor and compare the achieved numerical solutions with the available measurements to appraise the validity of achieved solutions. The comparisons are mainly provided for the predicted flame structure. The comparison indicates that the achieved numerical solutions are accurate enough... 

In this paper, we present a numerical simulation of a laminar, steady and Newtonian flow of f-graphene nanoplatelet/water nanofluid in a new microchannel design with factors for increasing heat transfer such as presence of ribs, curves to enable satisfactory fluid mixing and changing fluid course at the inlet and exit sections. The results of this study show that Nusselt number is dependent on nanoparticles concentration, inlet geometry and Reynolds number. As the nanofluid concentration increases from 0 to 0.1% and Reynolds number from 50 to 1000, the Nusselt number enhances nearly up to 3% for increase in fluid concentration and averagely from 15.45 to 54.1 and from 14.5 to 55.9 for... 

Nanotechnology is widely used in heat transfer devices to improve thermal performance. Nanofluids can be applied in heat pipes to decrease thermal resistance and achieve a higher heat transfer capability. In the present article, a comprehensive literature review is performed on the nanofluids’ applications in heat pipes. Based on reviewed studies, nanofluids have a high capacity to boost the thermal behavior of various types of heat pipes such as conventional heat pipes, pulsating heat pipes, and thermosyphons. Besides, it is observed that there must be a selected amount of concentration for the high-performance utilization of nanoparticles; high concentration of nanoparticles causes a... 

A numerical analysis has been performed to investigate the flow structure and thermal hydraulic performance of turbulent flow through circular tube equipped with twisted tapes with different cut shapes. The geometries of cuts are rectangular with different cut ratios 0.25