Sharif Digital Repository

This article proposes a new method for viewinvariant action recognition that utilizes the temporal position of skeletal joints obtained by Kinect sensor. In this method, the actions are represented as sequences of several pre-defined poses. After pre-processing, which includes skeleton alignment and scaling, the appropriate feature vectors are obtained for recognizing and discriminating the pose of every frame by the proposed Fisherposes method. The proposed regularized Mahalanobis distance metric is used in order to recognize both the involuntary and highly made-up actions at the same time. Hidden Markov Model (HMM) is then used to classify the action related to an input sequence of poses.... 

A microfluidic system provides an excellent platform for cellular studies. Most importantly, a three-dimensional (3D) cell culture model reconstructs more accurately the in vivo microenvironment of tissue. Accordingly, microfluidic 3D cell culture devices could be ideal candidates for in vitro cell culture platforms. In this paper, two types of 3D cellular aggregates, i.e., toroid and spheroid, are numerically studied. The studies are carried out for microfluidic systems containing U-shaped barrier as well as microwell structure. For the first time, we obtain oxygen and glucose concentration distributions inside a toroid aggregate as well as the shear stress on its surface and compare its... 

This paper reports the fabrication of electrospun polydimethylsiloxane (PDMS) membranes/scaffolds that are suitable for three-dimensional (3D) cell culture. Through modification the ratio between PDMS and polymethylmethacrylate (PMMA) as carrier polymer, we report the possibility of increasing PDMS weight ratio of up to 6 for electrospinning. Increasing the PDMS content increases the fiber diameter, the pore size, and the hydrophobicity. To our best knowledge, this is the first report describing beads-free, durable and portable electrospun membrane with maximum content of PDMS suitable for cell culture applications. To show the proof-of-concept, we successfully cultured epithelial lung... 

The effectiveness of secondary recovery methods in reservoir development studies depends on the knowledge about how fluid-carrying regions (i.e. good-quality rock types) are connected between injection and production wells. To estimate reservoir performance uncertainty, comprehensive simulations on many reservoir model realisations are necessary, which is very CPU consuming and time demanding. Alternatively, we can use much simpler and physically based methods such as percolation approach. Classic percolation assumes connectivity between opposite 2-D faces of a 3-D system; whereas, hydrocarbon production is achieved through active wells that are one-dimensional lines (e.g. vertical,... 

This article is devoted to the numerical investigation of the shock wave/boundary layer interaction (SWBLI) as the main factor influencing the aerodynamic performance of transonic bumped airfoils and wings. The numerical analysis is conducted for the ONERA-M6 wing through a shock control bump (SCB) shape optimisation process using the adjoint optimisation method. SWBLI is analyzed for both clean and bumped airfoils and wings, and it is shown how the modified wave structure originating from upstream of the SCB reduces the wave drag, by improving the boundary layer velocity profile downstream of the shock wave. The numerical simulation of the turbulent viscous flow and a gradient-based adjoint... 

Echocardiography as a common place device has been widely used for diagnosis. Segmentation of left ventricle just using the standard level set formulation based on the magnitude of intensity cannot restrict the contour evolution completely due to the lack of sharp edges. This paper aims to introduce a robust method for segmentation of three-dimensional echocardiography images based on two boundary maps namely distance map and probabilistic map as stopping criteria of contour evolution which are extracted using two different approaches. The distance map is extracted by applying Free Form Deformation (FFD) method on manually determined landmarks of initial spherical volume to register the... 

In this work, hybrid of silica nanoparticles (NPs) with sulfonated copolymer has been prepared in order to improve the copolymer properties for Enhanced Oil Recovery (EOR). Some tests are done to find the effectiveness of injecting fluid on Recovery Factor (RF), such as Contact Angle (CA), interfacial tension (IFT), inherent viscosity, and eventually Micro-Model (MM) flooding. In CA test, wettability alteration from Oil-Wet (OW) to Water-Wet (WW) is reached by sedimentation and adsorption of NPs on the rock slice. In addition, IFT reduction is obtained by increasing the NaCl concentration. The viscosity change is investigated for the hybrid and copolymer under simulated high-temperature oil... 

This paper studies through numerical simulation a practical compound restrainer to use for the improvement of seismic performance of bridges. A mechanical model has been introduced for the restrainer and a basic optimisation approach has been conducted to evaluate the performance of the restrainer to changes in the properties of its components. A real 2-span simply supported plate girder bridge has been selected for case study. Using a detailed three-dimensional model, several non-linear time history analyses were performed under seismic excitations in order to assess the performance of the bridge retrofitted by conventional restrainers including linear and non-linear viscous dampers on one... 

Existing sight distance models are applicable only to two-dimensional (2-D) separate horizontal and vertical alignments or simple elements of these separate alignments (vertical curve, horizontal curve). A new model is presented for determining the available sight distance on 3-D combined horizontal and vertical alignments. The model is based on the curved parametric elements that have been used in the finite element method. The elements presented are rectangular (4-node, 6-node, and 8-node elements) and triangular. These elements are used to represent various features of the highway surface and sight obstructions, including tangents (grades), horizontal curves, vertical curves, traveled... 

A novel algorithm to reconstruct the three-dimensional (3D) structure of non-rigid shapes based on a single view video, considering the perspective projection camera model, is presented in this paper. Even though perspective projection is considered to be the most realistic model and is ideal for a wide range of cameras in machine vision applications, but because of its complex and often non-linear equations, mostly, is approximated by some simpler camera projection models such as orthographic projection, weak perspective projection and so forth. Orthographic reconstruction of non-rigid surfaces has been done by singular value decomposition algorithm and using the orthogonal characteristics... 

3D wound core is a newly proposed core structure, which is used for construction of distribution transformers. Although many advantages have been proposed for transformer with 3D wound core and it has found increasing application in some countries such as China and Iran, no model has been presented so far in the literature for such transformers. In this paper, a low frequency model, derived based on the duality principle for transformer with 3D wound core, which can be used for both steady state and low-frequency transient studies. The validity of the model in steady state condition is then verified by experimental results. © 2017 IEEE  

In this article, a three-dimensional numerical simulation is performed to investigate the effect of magnetic field on the heat transfer of ferrofluid inside a tube which is equipped with twisted tape. This work comprehensively focused on the flow feature and temperature distribution of ferrofluid in presence of non-uniform magnetic field while ferrofluid swirled inside a tube with twisted tape. In this study, it is assumed that the ferrofluid is single phase and laminar and constant heat flux is applied on the outside of the tube. The magnetic field is established by wire in parallel direction with the axis of the tube. The base fluid is water with 0.86 Vol% Nano particles (Fe3O4). The... 

In this paper, a novel approach for foreground extraction has been proposed based on a popular three-dimensional imaging technique in optics, called integral imaging. In this approach, multiple viewpoint images captured from a three-dimensional scene are used to extract range information of the scene and effectively extract an object or a person, even in the presence of heavy occlusion. The algorithm consists of two parts: depth estimation and reconstruction of the targeted object at the estimated depth distance. Further processing of the resulting reconstructed image can lead to the detection of a face or a pedestrian in the scene, which may not otherwise be detectable due to partial... 

A typical process in many industrial applications is rising bubble dynamic in viscous liquids like two-phase reactors. Examining the physical behavior of bubbles may improve the understanding of systems regarding design and operation. This study focused on the splitting of bubbles resulting from their impact on solid obstacles. Fragmentation of the bubbles appears in many applications such as lab on a chip in small scale or slug bubbly flow moving upward in a tube in large scales. Using a new index-function model in Lattice Boltzmann technique proposed by “He”, we simulated the deformation and motion of a bubble in different regimes, through which, we accurately captured a sharp interface... 

Intensity modulated radiation therapy (IMRT) and three-dimensional conformal radiation therapy (3D CRT) are two treatment modalities in prostate cancer, which provide acceptable dose distribution in tumor region with sparing the surrounding normal tissues. IMRT is based on inverse planning optimization; in which, intensity of beams is modified by using multileaf collimators and also compensators with optimum shapes in step and shoot (SAS) and compensator-based method, respectively. In the recent study, some important parameters were compared in two IMRT and 3D CRT methods. Prescribed dose was 80 Gy for both IMRT procedures and 70 Gy for 3D CRT. Treatment plans of 15 prostate cancer... 

Physicians use charts that are prepared by experiments on animals or humans to prescribe drug dosage for patients. This method requires some precious amount of time by the Ministry of Health to approve new drugs to be used in healthcare centers. Three-dimensional modeling of the inner medulla by considering the known physiological features help us to predict the distribution of a drug or any minerals in the kidney. In this study we present modeling of the important species distribution including Na+ and urea in the rat inner medulla that influence the urine concentrating mechanism. We use a C++ code to develop the inner medulla geometry based on physiological data to better capture the... 

A sequential implicit numerical method based on discrete-fracture model and the Galerkin Finite Element method, for time-dependent coupled fluid flow and geomechanics problems in fractured subsurface formations is presented. Discrete-fracture model has been used to explicitly represent the fracture network inside porous media. The Galerkin Finite Element method with adaptive unstructured gridding is implemented to numerically solve the spatially three-dimensional and time-dependent problem. The presented method is validated with previously obtained solutions. Two problems are numerically solved by applying the presented methodology in a three-dimensional fractured petroleum reservoir under... 

The objective of this study was to develop and validate a novel 3D dynamic model of a pelvic side-impactor system. The biomechanical responses of a pelvic flexible model (having.mnf file suffix) under the lateral impact load for predicting the bone fracture mechanism are investigated as well. The 3D solid model of the side-impactor system was imported into MSC/ADAMS software for analyzing the dynamic model, and the pelvic flexible model was extracted from the CT images of a Chinese female volunteer. The flexible model of the pelvis system was developed considering a wide range of mechanical properties in the bone complex and soft tissue to achieve a realistic biomechanical response during a... 

In this article, we propose a three-dimensional model of a low-Reynolds-number swimmer that consists of three small spheres connected to a larger sphere via three perpendicular adjustable rods which enable the micro robot to swim along arbitrary trajectories. Then we focus on dynamic modelling of the swimmer and propose a control method to control the position of the micro swimmer in a low Reynolds number flow. The control aim intended in this article is that the middle sphere to follow a desired trajectory and respective simulation results from control indicates successful accomplishment in application. © 2018 IEEE  

New membrane materials and processes have been extensively developed due to urgent needs for much more economic separation processes. Recently, graphene has been confirmed to be an excellent separation membrane. As there is no support in the obtained three-dimensional (3D) architecture constructed from tubular graphene network, it is possible to take full advantage of the large surface of graphene. In this study 3D graphene aerogels were synthesized by a simple method and modified to adjust hydrophilicity of the samples to achieve high liquid volumetric rate. Modified samples were used for the filtration of the enzymes including amylase, cellulase, lipase and protease. Slightly differently...