Sharif Digital Repository

As the crowded cities require public transportation and because of lack of space on the ground, Subway and boring underground tunnels encountered. In this thesis the interaction of boring the line 7 of Tehran metro with the existing station of line 1 of Tehran metro (Molavi station) is studied. By changing the soil specification, The surface settlement is significant so the soil specification is one of the important parameters of the interaction. For comparinf the effect of these parameters, the soil settlement and bending moments is investigated in different parts of station while the lower tunnel is passing beneath it. The 3D Abaqus software is used for modeling this interaction. In... 

In aerospace applications, the weight of structures is considered as a major performance parameter. One of the most effective ways for weight reduction is then attributed to the structurally continuous manufacturing of mechanical components. In this way, not only the weight, but also the stress concentration, the cost, joints and fasteners applications, and the time of manufacturing are noticeably reduced. With this method, components with complicated shapes could be formed in a single manufacturing step. Special specification of whisker reinforced Metal Matrix Composites (MMC’s) has made these materials very attractive for the aerospace applications.That is why the superplastic forming of... 

Proton exchange membrane (PEM) fuel cell performance is directly related to the flow channel design on bipolar plates. Power gains can be found by varying the type, size, or arrangement of channels. It has been understood that the flow field design has deterministic role on mass transport and water management in a PEM Fuel cell. This study concentrates on improvements in the fuel cell performance through optimization of channel dimensions and configurations. A 3D, multi-component numerical model of flow distribution based on the Navier-Stokes equations using individual computer code is presented. The simulation results showed excellent agreement with the experimental results in previous... 

Numerous studies have shown a direct relationship between skeletal muscle active force and intracellular calcium ion concentrations; In fact, no matter how the muscle is stimulated (neurological, electrical, chemical, and mechanical stimuli), the main cause of muscle activation and consequently force generation is calcium ions.According to this scientific finding, the purpose of this study is to present a new chemo-mechanical multiscale model of skeletal muscle based on the fundamental principles of continuum thermodynamics. In this model, unlike other similar studies, muscle active force is not considered as the conventional multiplication of isometric force in a set of corrective... 

This research has been performed with the aim of gaining familiarity with various types of seismic isolation systems, their unique features and numerous advantages, factors affecting their performance and finally their modelling and design. Despite the advantages of seismic isolation systems as control instruments, but where there is not enough information on the involved parameters in the performance of these systems, there is possibility of unpredictable behavior of the structures. Hence, considering the extent and influence of each parameter involved in the performance of the isolators, a parametric study is performed utilizing the 3D models under multi-directional excitations, using the... 

One of the most critical equipments in power grids are power transformers, which are vulnerable to damage due to the possibility of faults in its various components. A very common category of such faults is turn-to-turn fault in its winding. This fault initiates by the aging of the winding insulation with a short circuit of several adjacent loops to each other and if it is not detected quickly by the transformer protection, it will spread rapidly and can lead to irreparable failure in the transformer. Traditionally, turn-to-turn fault should be detected by mechanical pressure relays, however, due to the poor performance of these relays in the rapid detection of this type of fault, in the... 

Nowadays, advanced and inexpensive pre-clinical methods for investigating the effects of anti-cancer drugs are expanding. One of the latest three-dimensional laboratory modeling for evaluating the effects of drugs is the use of tumor-on-chip technology, which actually models the physiological system of the body through three-dimensional scaffolds, multicellular cultures, and shaped vascular systems. In this study, three-dimensional culture of cancer cells was performed in the form of spheroids. A chip of U-shaped microstructures with and without gaps was used to trap cells and form cancer spheroids. We simulated the simultaneous effect of drug and oxygen concentration distribution inside the... 

Radial inflow gas turbines are widely used in auxiliary power units, small industrial gas turbines and turbocharger of internal combustion engines. They have advantage for low mass flow rate and wide range operation conditions. This research aimed to improve aerodynamic performance of the radial turbine of GT4082 Garret turbocharger. First, performance characteristics of the turbine were obtained experimentally at Turbocharger Laboratory of Sharif University of Technology. Laboratory results are the basis for modeling evaluation. Then, a one-dimensional model was developed to predict the turbine performance characteristics. The model results were compared with experimental results, that... 

Because of severe weather events (such as floods and storms), transportation infrastructures are directly and indirectly damaged, which may cause many undesirable economic and social losses for people and cities. Among various severe events, flood is known as an important factor in the breakdown (closure of roads and bridges) of the components of the transportation network. Evaluating the performance of the city's road transport network against flood events leads to a better understanding of the network's condition and allows decision-makers to identify the weaknesses in the system and reduce potential damages as much as possible. In this research, with the aim of investigating the... 

One major problem in sport match analysis and interpretation is that there are restricted viewpoints of the game. 3D reconstruction allows us to have virtual replay from any viewpoint so that the events such as penalties can be detected easily. For achieving this purpose, we use many cameras with overlapped views that cover almost all parts of the field. After some preprocessing, 3D reconstruction and texture mapping, we can enhance the viewer experience by having arbitrary viewpoint of the match. In this research, we use two different visual hull methods for 3D reconstruction. In the first method, the visual hull of an object is computed efficiently and robustly from image contours. This... 

The aim of this project is decentralized control of a group of robots (swarm robots); such that the aggregation maneuver, leader following, Identification and imaging the target, will be performed so good as to make a three-dimensional model of the target from these images. Swarm robots consist of a number of similar and limited features robots which interaction in a group of robots, will lead to special features for the group. Any agent of group decides what to do only with its local information from the environment. Swarm robots are more applicable for the jobs in which a distributed perception from the environments needed, for example space exploration and military operations.In this...