Sharif Digital Repository

The features of heat transferral capability between metallic (Cu) and non-metallic (TiO2) nanoparticles suspended in the engine-oil (EO) third-grade base-liquid has been analysed under the influence of strong magnetic field. The numerical investigation of system of coupled differential equations for third-grade nanofluid flow model is accomplished via Quasi-linearization method (QLM). The stretching horizontal sheet is heated through convective heat process assuming the special effects of thermal radiation, joule heating, heat generation and viscous dissipation in the energy equation. The mass suction and slip velocity at the boundary of the sheet has been taken into account to enhance... 

For the first time this work reports a new idea to develop a round-the-clock self-cleaning coating which was successfully applied to preserve cultural heritage and modern artifacts under sunlight illumination and at night. To fabricate this structure, namely, H2:TiO2/WO3@Pt, soft templating and hydrogen treatment approaches were selected to enhance the performance of TiO2/WO3 photocatalyst, together with the addition of Pt plasmonic nanoparticles. The coating can be photochemically charged in the presence of sacrificial electron donors and keep its stability, benefiting from the remained electrons stock for over 10 h to clean the surface from aggressive pollution also at night, in absence of... 

A novel and efficacious strategy was implemented for creation of mesoporous TiO2 films and powder through an integration of sol-gel and evaporation-induced self-assembly (EISA) processes aided by triblock Pluronic P123. A mesoporous crack-free thin film with virtual thickness of 300 nm was attained under 10% relative humidity aging, for 72 h at the low temperature of 5 °C. Further, the TiO2 film with porous structure has been formed from conventional paste, exploiting as-prepared mesoporous titania powder. The X-ray Diffraction (XRD) of synthesized mesoporous powder disclosed formation of anatase phase as well as rutile phase, in such a manner that the latter constituted a very small... 

H2O-assisted atmospheric pressure chemical vapor synthesis is a modern economical process for the gas-phase synthesis of TiO2 nanoparticles. In the present work, the influence of synthesis temperatures (100-800 °C) on the phase structure, nanoparticle size, morphology, and agglomeration is investigated by transmission electron microscopy, selected area electron diffraction, X-ray diffraction, thermogravimetry, and differential thermal analysis. Down to 400 °C, crystalline TiO2 nanoparticles are synthesized and at 200 °C amorphous nanoparticles are formed. Therefore, a decrease in minimum synthesis temperature by more than 500 °C is achieved. In addition, the paper investigates the hypothesis... 

Preparation of the defective TiO2 nanoparticles (NPs) have been recently in particular interest for its outstanding applications in visible-light active photocatalysis. In order to make TiO2 visible-light absorber, optical band gap should be modified especially via introducing structural defects like oxygen vacancies as an effective pathway. In this research, we prepared defective rutile TiO2 NPs with highly efficient photocatalytic activity under visible light. The NPs were synthesized by electric arc discharge in water as a cost-effective and environmentally friendly method with capability of defect formation which followed by heat treatment. The photocatalytic activity improvement... 

In this research, for the first time, the effect of air quenching on the microstructural and electrical properties of (In, Nb) co-doped TiO2 was investigated. The FE-SEM images showed that the air quenching has no effect on microstructure of co-doped TiO2. However, air quenching affected the electrical properties so that the dielectric constant in the frequency of 1 kHz at room temperature sharply enhanced from 21*103 to 26*104 and the dielectric loss surprisingly decreased from 0.6 to 0.1. This incredible improvement in the dielectric properties is attributed to the electron-pined defect dipoles which has been activated through air quenching. © 2020 Elsevier B.V  

Titanium does not react well with the human tissues and due to its bio-inert nature the surface modification has yet to be well-studied. In this study, the sonoelectrochemical process has been carried out to generate TiO2 nanotube arrays on implantable Ti 6–4. All the prepared nanotubes fill with the vancomycin by immersion and electrophoresis method. Drug-releasing properties, antibacterial behavior, protein adsorption and cell attachment of drug-modified nanotubes are examined by UV–vis, flow cytometry, modified disc diffusion, BSA adsorption, and FESEM, respectively. The most uniform morphology, appropriate drug release, cell viability behavior and antibacterial properties can be achieved... 

BiVO4/Graphene/TiO2 as a novel nanocomposite photoanode was designed, synthesized and characterized for photoelectrochemical application. BiVO4/Graphene nanocomposite was initially synthesized by photocatalytic process and then, BiVO4/Graphene/TiO2 nanocomposite thin film was prepared by deposition of the BiVO4/Graphene solution onto the surface of sol-gel derived TiO2 thin film. Morphology, crystal structure, surface chemical composition and optical properties of the synthesized BiVO4/Graphene/TiO2 nanocomposite thin film were characterized and compared with the BiVO4/Graphene and pure TiO2 samples. Observations of scanning electron microscopy (SEM) images revealed that the surface of the... 

We synthesize TiO2@SnO2 core-shell nanoparticles (NPs) by a facile two-step aqueous sol-gel method and their photocatalytic activity is compared with the pure TiO2 and SnO2 NPs for degradation of methylene blue under UV irradiation. The chemical property, crystal structure and morphology of the synthesized samples are studied by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FE-SEM) and transmission electron microscope (TEM) techniques. The mechanisms of electron–hole recombination and separation of charge carriers are studied by photoluminescence (PL) and diffuse reflectance spectroscopy (DRS). Furthermore, the kinetics... 

A highly sensitive and selective sunlight-driven photoelectrochemical sensor for the direct detection and reduction of chromium(VI) was developed based on single crystal rutile titanium dioxide nanorods decorated with gold nanoparticles. Under sun simulator illumination via the amperometric technique, these Au decorated TiO2 photoelectrodes exhibited the highest sensitivity (13.94 μA μM−1) ever reported among Au-based electrodes for Cr(VI) detection, with a very low detection limit (S/N = 3) of 0.006 μM and wide linear concentration range from 0.01 μM to 50 μM. Measurements in real water samples such as laboratory and river water also showed excellent anti-interference and recovery... 

In this study, superhydrophobic dual layer membranes with highly porous structure were fabricated using electrospinning and electrospraying techniques. Electrospinning method was used to produce the support nanofibrous layer using polyvinylidene fluoride-co-hexafluoropropylene (PH) as the polymer and a mixed solvent system of N,N-Dimetylformamide (DMF) and acetone. Afterwards, hydrophobic, functionalized TiO2 nanoparticles were deposited on the surface of the support layer using the electrospraying technique. TiO2 chemical functionalization and their deposition on the support layer were investigated by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy. The... 

In this work, the synthesized graphene oxide/TiO2/doxorubicin (GO/TiO2/DOX) composites were loaded into the chitosan/poly(lactic acid) (PLA) solutions to fabricate the electrospun chitosan/PLA/GO/TiO2/DOX nanofibrous scaffolds via electrospinning process. The synthesized composites and nanofibers were characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. Three-factor three-level central composite design was used to determine the influence of PLA to chitosan ratio, TiO2/DOX content and GO/TiO2/DOX content on the release of DOX from nanofibrous scaffolds. Drug loading efficiency and drug release behavior from... 

The nanotubular arrays of titanium dioxide (TiO2 NTs) have recently received considerable interest for fabrication of dental and orthopedic implants. However, their antibacterial activity requires substantial improvement for the potential infections minimization, without compromise of their biocompatibility. In this work, TiO2 NTs were developed on Ti6Al4V substrates via anodization at a constant potential of 60 V for 60 min, followed by heat treatment at 500 °C for 90 min. Physical vapor deposition (PVD) was further employed to decorate silver oxide nanoparticles (Ag2O NPs) on the nanotubular edges. The results indicated that the highly-ordered TiO2 NTs with decorated Ag2O NPs could promote... 

A series of g-C3N4-SnO2/TiO2 nanotubes/Ti plates were fabricated via simple dipping of TiO2 nanotubes/Ti in a solution containing SnCl2 and g-C3N4 nanosheets and finally annealing of the plates. Synthesized plates were characterized by various techniques. The SEM analysis revealed that the g-C3N4-SnO2 nanosheets with high physical stability have been successfully deposited onto the surface of TiO2 nanotubes/Ti plate. Photocatalytic activity was investigated using two probe chemical reactions: oxidative decomposition of acetic acid and oxidation of 2-propanol under irradiation. Antibacterial activities for Escherichia coli (E. coli) bacteria were also investigated in dark and under UV/Vis... 

In this work, the synthesized graphene oxide/TiO2/doxorubicin (GO/TiO2/DOX) composites were loaded into the chitosan/poly(lactic acid) (PLA) solutions to fabricate the electrospun chitosan/PLA/GO/TiO2/DOX nanofibrous scaffolds via electrospinning process. The synthesized composites and nanofibers were characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. Three-factor three-level central composite design was used to determine the influence of PLA to chitosan ratio, TiO2/DOX content and GO/TiO2/DOX content on the release of DOX from nanofibrous scaffolds. Drug loading efficiency and drug release behavior from... 

In recent decades, utilizing of water-based muds (WBMs) in drilling oil and gas wells is ever increasing comparing to oil-based muds and synthetic-based muds due to the lower environmental issues. However, the main drawbacks with WBMs are rheological properties inefficiency and shale swelling which have caused attentions turn to improvement of WBMs’ rheological properties. In this study, the effects of various nanoparticles (NPs) namely titanium dioxide (TiO2), silicon dioxide (SiO2), and zinc oxide (ZnO) on improving rheological properties and shale recovery rate of a WBM sample at two temperatures (25 and 50 °C) were investigated. The concentrations of NPs in the base mud were set at 0.01,... 

The potential of electrospun cellulose acetate/chitosan/single walled carbon nanotubes/ferrite/titanium dioxide (CA/chitosan/SWCNT/Fe3O4/TiO2) nanofibers was investigated for the removal of Cr(VI), As(V), Methylene blue and Congo red from aqueous solutions via the adsorption and photocatalytic reduction processes. The properties of synthesized SWCNT/Fe3O4/TiO2 and fibers were characterized using TEM, SEM, FTIR, XRD, TGA and BET analysis. In adsorption process, the influence of adsorbent type including SWCNT to Fe3O4 ratio, TiO2 to SWCNT/Fe3O4 ratio and SWCNT/Fe3O4/TiO2 concentration as well as the adsorption parameters including pH, contact time, and initial concentration of adsorbates on... 

TiO2 nanotube arrays (TNA) have been modified by cobalt phosphate (CoPi) through potentiostatic electrodeposition method. Different samples have been prepared by changing the loaded CoPi through the deposition time from 10 to 960 min. Formed catalytic materials have been characterized by different methods. Although charge transfer resistance of the CoPi/TNA photoanodes have been decreased from 5.5 to 4.0 kΩ by increasing the deposition time from 5 to 60 min, the maximum photoresponse was obtained for 10 min CoPi deposition leading to 24% more photocurrent compare to bare TNA which proposed optimum value for cobalt phosphate decoration. Based on field emission scanning electron microscopy... 

To improve the biocompatibility and corrosion resistance of 316L SS (Stainless Steel) metal implants, HAp(hydroxyapatite)/TiO2/Al2O3 nanocomposite coating was created using dip sol-gel method sintered at 550 °C. The weight percentage of TiO2+ Al2O3 in these coatings was 20, 30, and 40% wt. In this study, characterization was performed using FTIR (Fourier-Transform Infrared Spectroscopy), XRD, FE-SEM (Field Emission Scanning Electron Microscope), EDS (Energy Dispersive Spectroscopy), DLS (Dynamic Light Scattering), Pull-off, and AFM (Atomic Force Microscopy) analysis. The potentiodynamic polarization and EIS (Electrochemical Impedance Spectroscopy) were performed in the simulated body fluid... 

A surface to separate oil–water mixtures is a global concern and highly needed particularly in oil industries. The present study was conducted to create a novel superhydrophilic/superoleophobic nanocomposite coating on the stainless-steel mesh for the aim of oil/water separation. Different hydrophilic resins along with PFOA as oleophobic agent with 15 flours in its chemical structure and various oxide nanoparticles containing SiO2 and TiO2 at different concentrations were studied to achieve superhydrophilic/superoleophobic surface. The fabricated nanocomposites were fully characterized via field-emission scanning microscopy (FESEM), atomic force microscopy (AFM) and Fourier-transform...