Sharif Digital Repository

Dye Sensitized Solar cell (DSC) is the third class of solar cell, which consists of a nanocrystalline, mesoporous of semiconductor(The best one is Tio2), covered with a monolayer of dye molecules, platinum coated on FTO as a counter electrode and a redox electrolyte. This Photovoltaic cell which is promising low-cost materials, works on electron separation of dye molecule, and electron injection to semiconductor’s conduction photo- electrode structure and its porosity is affected the DSC’s performance. Recently, use of electrophoretic deposition (EPD) for TiO2 electrode (which best found for photo-electrode in DSC) fabrication has gained increased interests. In this method charged particles... 

Today reverse osmosis (RO) is the dominant technology for desalination. Most of commercially available RO membranes are polyamide thin film composite (TFC) types which exhibit good performance. However, the major obstacle for application of polyamide TFC RO membranes is fouling which can be mitigate by surface modification.In this research, surface modification of fabricated aromatic polyamide TFC RO membranes was carried out using UV-initiated graft polymerization at different irradiation times (15, 30, 60, and 90 s) and various acrylamide concentrations (10, 20, and 30 g/L). Also, coating of membranes surface with various concentrations of TiO2 nanoparticles (10, 20, 30, and 50 ppm)... 

Titanium nano-oxide (TiO2) coatings have been used for self-cleaning, antimicrobial, and dust-proof designs. The degree of wetting of a solid surface with water in humid air depends on how the surface tension of the existing phases relates. The ratio between these tensions estimates the contact angle between a drop of water and the surface on which it is placed. A contact angle above 150 º is essential for surface overflow. In this study, 18 different combinations of titanium oxide and FAS, PDMS and PMS nanoparticles were obtained with a static contact angle of 165 to 150 º and a dynamic contact angle of 7 º.1 to 4.5 º. Following the measurement of water droplet slip speed on a sloping... 

During the past few years, hexavalent chromium (Cr(VI)) is of environmental concern due to its high toxicity and mobility. Therefore, removing it from industrial wastewater is of chief significance. In this research, efficient photocatalyst materials (xµLTiO2NPs@ZIF-8) for the reduction of Cr(VI) from water resources were firstly synthesized. This composite was prepared by an in situ method with zeolitic imidazolate framework-8 as the matrix. TiO2 and ZIF-8 were selected for their excellent stability in aqueous media, high photoactivity, non-toxicity, and high surface area. The structure of the as-synthesized materials was characterized by X-ray powder diffraction (XRD), scanning electron... 

Today, recycling lithium as a valuable metal from brine plays an important role in various applications such as battery manufacturing, computers, aerospace and automobiles. Among the aqueous methods available for the extraction of the lithium element in brines, ion exchange by TiO2 nanosorbents is one of the most efficient methods. In this study, first the titanium dioxide nanotubes were well synthesized by anodizing method and the nanograss created after the anodizing process were completely eliminated. Then, the effect of three cathodes of aluminum, graphite and stainless steel in order to select the best cathode and achieve a regular morphology as well as their replacement with platinum... 

hydrogen considered as one of clean energy carriers and is the most promising alternative to fossil fuels. The production of hydrogen from photoelectrochemical water splitting using titanium dioxide nanotubes arrays (TNA) as a photoanode has been of interest to many researchers in recent years. In this study, TNAs were fabricated with two-step anodic oxidation method at a constant applied voltage of 60 V DC. The fabrication process was performed for duration time of 1, 2, 3, 4 and 5 hours. Photoelectrochemical analysis for the fabricated samples shows that TNA prepared for 3 hours anodic oxidation time exhibited the highest current density of 1 mA.cm-2 at 0.5 V bias voltage (Optimized... 

Nowadays, heterogeneous photocatalytic processes have attained a particular importance among the other advanced oxidation processes in purification of organic polluted wastewaters. Titanium oxide is the most popular photocatalyst because of its strong oxidizing abilities for decomposition of organic pollutants, superhydrophilicity, chemical stability, long durability, non-toxic nature, and low cost. Same as other semiconductors, high recombination rate of charge carriers is the main weakness that cause decreases in photocatalytic efficiency. One of the solutions is coupling this material with other semiconductors. Core-shell nanoparticles are the type of these composites that show high... 

The main purpose of this research was functionalizing graphene, in order to achieve higher hydrophobicity, and producing nanocomposite of functionalized graphene and titanium dioxide by hydrothermal method, and sequently invastigation on photocatalytic properties of the powders and corrosion properties of EPD coated samples. Graphene oxide was synthesized by improved Hummers method and reduced and sequently was functionalized through the chemical process with hydrazine and octadecylamine respectively. Then the nanocomposite of functionalized graphene-titania was synthesized by use of titanium isopropoxide precursor and its photocatalytic properties were measured. The analysis of the... 

Apatite-coated Ag/AgBr/TiO2 was prepared by deposition of Ag as noble metal to generate electron-hole pairs by extending the excitation wavelength to visible light region, AgBr as photo-sensitizer to increasing yield of photo catalyst, and apatite as adsorption bio ceramic for adsorbing pollutants and micro organisms respectively. The bactericidal experiments in dark media indicated that only novel catalyst show inhibiting growth of bacteria. In this case Transmission electron microscopy image illustrated that catalyst nano particles adhere to the outer membrane of the cell and acts as inhibitor to nourish of bacteria from around media. The mechanism for deactivation E-Coli and B.Sub in the... 

In the present study, TiO2-reduced graphene oxide (T-RGO) nanocomposites were synthesized via various in-situ and ex-situ methods, then their photovoltaic performance was examined as photoanode and mesoporous layers in dye-sensitized Solar Cells (DSSCs) and perovskite Solar Cells (PSCs), respectively. Graphene oxide (GO) was prepared using Hummer’s method with some modifications. Both thermal and hydrothermal processes were used to reduce GO. Structural and optical characterization was analytically demonstrated by subjecting of the obtained materials by several techniques, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman, thermogravimetric analysis (TGA),... 

In this research, first thin films with nanostructures of titanium nanotube arrays (TNAs) synthesized by anodization under different applied voltage (20- 60 V) and different reaction times (120 and 200 min). The electrolyte solution for synthesizing the samples contained 90% ethylene glycol (EG), 10% DI water, 0.1 M NHR4RF and a little HR3RPOR4R to reach the pH to 5.6. The synthesized samples crystallized under annealing treatment at 500 °C (with heating rate of 9.5 °CminP -1 P). The scanning electron microscopy (SEM) analysis was indicate that the length and the inner diameter of the nanotubes have increased from 1.6 μm and 67 nm (for 30 V anodization and for 2h) to 4.2 μm and 125 nm (for... 

According to human needs and in line with the development of advanced technologies, different biomedical Engineering fields like hard tissue implants are growing rapidly. Despite significant biotechnology Developments in recent years, some problems to the recognition of implants related osseointegration phenomena persist. The deficient osseointegration and implant-associated infections are key issues for the long-term clinical success of titanium and titanium alloy implants, while development of multifunctional surfaces that can simultaneously overcome these problems remains highly challenging. Therefore, the ultimate goal of this paper was to improve bone cell attachment and simultaneously... 

Two-dimensional nanostructures can significantly absorb solar irradiation, due to diverse energy levels, large effective surfaces, layered and porous structures with adjustable physical and chemical properties. Mono and multilayers of graphene, as the first isolated 2D materials with special band-structure of a zero-band gap, along with impressive optical properties, tunable light interaction, and adjustable optical properties by chemical doping or structural defects, have great potential for the next generation of nanophotonic devices. So, graphene is an appropriate candidate for absorption, frequent reflection, and energy conversion of electromagnetic waves at the frequency range of the...