Sharif Digital Repository

We substitute indium present in the CuInS2 ternary compound by iron and zinc using a facile one-pot synthesis method. The quaternary compound of CuIn1-xMxS2 (M = Fe and Zn) was synthesized by dissolving CuCl, InCl3, FeCl3, Zn(ac)2 and SC(NH2)2 as precursors in 1-octadecene, oleylamine and oleic acid as non-coordinating, coordinating and capping agent solvents, respectively. Oleic acid, oleylamine and thiourea were used respectively as a hard Lewis base, borderline Lewis base (in comparison with oleic acid) and soft Lewis base to form appropriate complexes. The complex formation, structure, and... 

A soft template route is reported for the fabrication of polyaniline nanospheres via the oxidative polymerization of aniline in the presence of β-naphthalenesulfonic acid (β-NSA) as both surfactqant and dopant, and ammonium persulfate as oxidant at 2-5°C. Control over the morphology and size of the nanoparticles was achieved by changing the reaction medium via addition of an organic cosolvent (i.e. ethanol or ethylene glycol) and by controlling the concentrations of aniline and β-NSA and the molar ratio of β-NSA to aniline. By this means the size of the β-NSA-aniline micelles and the way that aniline monomer interacts with the micelles were controlled. In fact the lower dielectric constant... 

Polystyrene- (Styrene Ethylene Butylene Styrene-Maleic Anhydride) (SEBS-MA) composites with/without organoclay were prepared by melt intercalation method. The morphology, tensile and impact properties and deformation mechanism of these compounds were investigated. X-ray diffraction, transmission electron microscopy and reflected and transmitted optical microscopy techniques were used to study the morphology and deformation mechanisms. The results show that incorporation of SEBS with/without organoclay notably affects morphology, mechanical properties and plastic deformation of polystyrene. Introduction of SEBS with/without organoclay can facilitate initiation and growth of crazing mechanism... 

Na3MnCO3PO4 (NMCP) particles were synthesized via ball milling of Mn(NO3)2.4H2O, Na2HPO4.2H2O and Na2CO3.H2O powders. The particles were anchored onto reduced graphene oxide (rGO) sheets during hydrothermal reduction process under stirring. Materials produced were characterized by x-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric (TG) measurement and galvanostatic charge/discharge tests. Results showed that dissolution of ball milling products in DI water is an effective method for separation of NMCP from byproducts. Best milling time for production of pure NMCP of minimum particle... 

VO2(picolinichydrazone) complex as a catalyst was stabilized on a SBA-15 mesoporous silica as a catalytic support by using (3-chloropropyl)triethoxysilane as a connector. SBA-15 is nanoporous and has a high ratio of surface area to volume. The immobilization of a metal–Schiff base complex to the surface area of SBA-15 can improve its catalytic effects by increasing the catalytic surface area. Unlike homogeneous catalysts, heterogeneous catalysts can be recovered and reused several times without any significant loss of catalytic activity. A vanadium–Schiff base complex-functionalized SBA-15 was synthesized by covalency connected by a pre-synthesised VO2(picolinichydrazone) complex to... 

Finemet bulk soft magnetic alloy was fabricated by spark plasma sintering of the milled ribbons. The amorphous melt-spun ribbons were milled for 36min by high energy vibrational mill and then sieved to separate particles smaller than 125μm. The size distribution of particles was determined by a laser diffraction particle size analyzer. Spark plasma sintering was carried out at super-cooled liquid region for short times of 7 and 21min. The structure of bulk samples was characterized using X-ray diffraction, scanning electron microscopy, differential scanning calorimetry and transmission electron microscopy techniques. The magnetization and coercivity of samples were measured using SQUID... 

Copper supported on polymer-coated magnetic nanoparticles was designed and synthesized as a separable heterogeneous catalyst. The catalyst was fully characterized using several techniques such as Fourier transform infrared and energy-dispersive X-ray spectroscopies, scanning and transmission electron microscopies, X-ray diffraction, vibrating sample magnetometry, thermogravimetric analysis and inductively coupled plasma atomic emission spectrometry. All results showed that copper was successfully supported on the polymer-coated magnetic nanoparticles. Also, results showed that the synthesized material can be used as an efficient catalyst for the preparation of a series of 1,4-disubstituted... 

A copper catalyst has been explored as an efficient and recyclable catalyst to effect Sonogashira and Suzuki cross-coupling reactions. After modification of 2-(((piperazin-1-ylmethyl)imino)methyl)phenol (PP) on the surface of amorphous silica-coated iron oxide (Fe3O4@SiO2@Cl) magnetic core-shell nanocomposite, copper(II) chloride was employed to synthesize the Fe3O4@SiO2@PP-Cu catalyst, affording a copper loading of 1.52 mmol g-1. High yield, low reaction times, non-toxicity and recyclability of the catalyst are the main merits of this protocol. The catalyst was characterized using Fourier transform infrared, X-ray photoelectron, energy-dispersive X-ray and inductively coupled plasma optical... 

A tensile-compression fatigue response of Al matrix composites containing different amount of SiC nanoparticles (50 nm diameter) up to 6 vol. pct was studied. The nanocomposite powders were prepared by a powder metallurgy (P/M) route consisting of mechanical alloying, hot extrusion, and hot closed-die forging. The microstructure of the materials was evaluated by optical microscopy, scanning and transmission electron microscopies, and electron backscattered diffraction. A fine distribution of the nanoparticles in submicron and ultrafine grains was obtained. The low cycle fatigue behavior was examined in stress control mode under fully reversed tension-compression cycle at 1 Hz up to 1000... 

The aim of this paper is to investigate the thermal conductivity and viscosity of a hybrid nanofluid containing tetramethylammonium hydroxide (TMAH) coated Fe3O4 nanoparticles and gum arabic (GA) coated carbon nanotubes (CNTs), experimentally. The magnetic nanoparticles and CNTs are physically attached as the result of interaction between the TMAH and GA molecules. The morphology and structure of the samples are characterized with X-ray diffraction (XRD) and transmission electron microscopy (TEM). The experiments are carried out in the magnetic nanoparticles volume concentration range of 0.1–0.9 %, CNT volume concentration range of 0.05–1.35 % and the temperature range of 25–55 °C. The... 

In this research, Araldite 2011 has been reinforced using different weight fractions of Reduced Graphene Oxide (RGO). Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) analyses were conducted and it has been shown that introduction of the RGO greatly changes the film morphology of the neat adhesive. Uni-axial tests were carried out to obtain the mechanical characteristics of the adhesive-RGO composites. It has been observed that introducing 0.5 wt% RGO enhances the ultimate tensile strength of the composites by 30%. In addition, single lap joints using neat adhesive and adhesive-RGO composites were fabricated to... 

A new heterogeneous copper catalyst was synthesized by immobilization of copper ions onto magnetic nanoparticles with a new ligand based on triazole. The catalyst was characterized using scanning and transmission electron microscopies, atomic absorption and Fourier transform infrared spectroscopies, and thermogravimetric, elemental and energy-dispersive X-ray analyses. The results confirmed that a good level of organic groups was immobilized on the magnetic nanoparticles. Huisgen cycloaddition reaction was chosen as a model reaction for the investigation of catalyst activity under green conditions. Phenylacetylene and benzyl bromide derivatives were used for the synthesis of triazoles. The... 

The current study demonstrates homogenous decorating of zinc oxide quantum dots (QDs) onto graphene oxide (GO) surface via simple chemical method. The AFM image exhibited that the prepared graphene was 0.8 nm thick and hence practically monolayer. Average size of the ZnO QDs was estimated by transmission electron microscopy around 3 nm. Instrumental and chemical analyses demonstrated formation of a strong bond between ZnO QDs and GO, through C-O-Zn and C-Zn bridges. The UV-visible spectra displayed that the introduction of graphene sheets to ZnO QDs resulted in higher absorption intensity of UV as well as widening of adsorption window toward visible light for ZnO-Graphene due to chemical... 

Abstract: In this investigation, monodisperse CuGaS2 nanoparticles intended for use as visible-light-absorbing materials were synthesized using a facile one-step heating method that involved dissolving the precursors copper chloride, gallium acetylacetonate, and thiourea in a solvent consisting of either oleylamine alone or a combination of oleylamine, oleic acid, and 1-octadecene. The shapes of the resulting nanoparticles were either elongated, polygonal, or a mixture of both, depending on whether the crystal structure of the nanoparticles was predominantly wurtzite, predominantly chalcopyrite, or a more balanced mixture of both wurtzite and chalcopyrite (i.e., the nanoparticles were... 

The effects of thermal history on the microstructure and mechanical properties of a friction-stir-processed Al–Mg–TiO2 (3 vol.-%, 20 nm) nanocomposite were studied. It is shown that, with increases in peak temperature, a more uniform distribution of nanoparticles in the metal matrix, and a refined grain structure, are attained. Transmission electron microscopy indicated that the mechanism of grain refinement is influenced by the hard inclusions, changing from discontinuous to continuous dynamic recrystallisation. A fine-grained nanocomposite (average grain size of 3 µm) with a uniform distribution of nanoparticles is obtained after four fully-overlapping passes at 1200 rev min−1 and 100 mm... 

A copper catalyst has been explored as an efficient and recyclable catalyst to effect Sonogashira and Suzuki cross-coupling reactions. After modification of 2-(((piperazin-1-ylmethyl)imino)methyl)phenol (PP) on the surface of amorphous silica-coated iron oxide (Fe3O4@SiO2@Cl) magnetic core–shell nanocomposite, copper(II) chloride was employed to synthesize the Fe3O4@SiO2@PP-Cu catalyst, affording a copper loading of 1.52 mmol g−1. High yield, low reaction times, non-toxicity and recyclability of the catalyst are the main merits of this protocol. The catalyst was characterized using Fourier transform infrared, X-ray photoelectron, energy-dispersive X-ray and inductively coupled plasma optical... 

In this manuscript, synthesis of cobalt/poly vinyl alcohol (PVA)/gamma alumina nanocomposite via a simple room temperature, as well as its catalyst performance were explored. Brunauer–Emmett–Teller analysis, X-ray diffraction, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy were conducted. The surface area of the polymeric composite was obtained to be 280 m2/g. The cobalt loading on the nanocomposite was measured using inductivity couple plasma. Transmission electron microscopy analysis showed that the size of cobalt crystalline encapsulate inside the polymer was confined to 5 nm. Magnetic property analysis, using vibrating sample magnetometer, confirmed... 

Copper supported on polymer-coated magnetic nanoparticles was designed and synthesized as a separable heterogeneous catalyst. The catalyst was fully characterized using several techniques such as Fourier transform infrared and energy-dispersive X-ray spectroscopies, scanning and transmission electron microscopies, X-ray diffraction, vibrating sample magnetometry, thermogravimetric analysis and inductively coupled plasma atomic emission spectrometry. All results showed that copper was successfully supported on the polymer-coated magnetic nanoparticles. Also, results showed that the synthesized material can be used as an efficient catalyst for the preparation of a series of 1,4-disubstituted... 

Platinum nanotubes (PtNTs) are fabricated by potentiostatic electrodeposition at various overpotentials (−200 up to −400 mV versus SCE) in polycarbonate templates (PCTs) with pore diameter of 200 nm in a solution containing 5 mM H2PtCl6 and 0.1 M H2SO4. The synthesized PtNTs are characterized by field emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM). The electrochemical growth mechanism within nanoscopic pores and the relationship between morphological variations and kinetic parameters are investigated for the first time. It is shown that more porous structure of nanotubes forms at high overpotentials possibly due to preferably nucleation. The... 

Herein, an electrochemical technique as a cost-effective and one-step approach was utilized to fabricate graphene quantum dots (GQDs). Different amounts of GQDs (0, 0.2, 0.4, 0.8, and 1.2 wt %) were decorated uniformly on the surface of anodized ZnO nanowires (NWs) forming GQD/ZnO NWs. Transmission electron microscopy and atomic force microscopy confirmed formation of GQDs on the ZnO NWs, 12-22 nm in width and 1-3 graphene layers thick. X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy were employed to verify the functional groups on the surface of GQDs, and the results indicated that GQDs readily anchored on the surface of ZnO NWs. The GQD/ZnO NWs exhibited a...