Sharif Digital Repository

The response of a rod-stabilized, V-shaped, premixed flame to upstream velocity and equivalence ratio perturbations was characterized as a function of excitation frequency. The response of the flame to equivalence ratio perturbations was calculated, assuming that the heat release response is controlled by contributions from three disturbances. These disturbances include flame speed, heat of reaction and flame area. Using an analytical model, based on linearization of the front tracking equation for inclined flames, the kinematics of a V-flame anchored on a central obstacle was investigated and its response was compared with that of a conical flame. The results suggest that the phase response... 

Production logging is used to evaluate wells production performance. Interpretation of production log data provides velocity profile and contribution of each zone on total production. In multi-phase flow conditions, production log interpretation can be challenging since producing fluids do not have similar densities and travel with different speed depending on fluids properties and wellbore deviation. Production log interpretation in multi-phase producing wells requires identifying downhole flow regimes and determining velocity profile for each phase. There are different flow regimes and velocity models available, which are being used in production log interpretation to determine wells flow... 

The present investigation is devoted to the second law of thermodynamics analysis of steady-state hydrodynamically and thermally fully developed laminar gasflow in a microannulus with constant but different wall heat fluxes. Slip velocity and temperature jump boundary conditions are usedtodescribe rarefaction effects. Viscous heating is also included for both the wall cooling and heating cases. Using already available velocity profile, closedform expressions are obtained for the transverse distribution of temperature and entropy generation rates. The results demonstrate that the effectof the wall heatfluxes ratioonentropy generation is negligible atlarge valuesofthe group parameter and... 

This paper presents the homotopy series solution of the Navier-Stokes and energy equations for non-Newtonian flows. Three different problems, Couette flow, Poiseuille flow and Couette-Poiseuille flow have been investigated. For all three cases, the nonlinear momentum and energy equations have been solved using the homotopy method and analytical approximations for the velocity and the temperature distribution have been obtained. The current results agree well with those obtained by the homotopy perturbation method derived by Siddiqui et al (2008 Chaos Solitons Fractals36 182-92). In addition to providing analytical solutions, this paper draws attention to interesting physical phenomena... 

In this paper, the transient motion of an intelligent Pipe Inspection Gauge (PIG) while moving across anomalies inside a typical gas/oil pipeline has been investigated. The pipeline fluid has been considered as isothermal and compressible. In addition, the pipeline itself has also been considered to be flexible. The fluid continuity and momentum equations along with the 3D dynamic equations of motion of the pig comprise a system of coupled dynamic differential equations which have been solved numerically. Pig's position, orientation and velocity profiles as well as upstream and downstream fluid's pressure waves are presented as simulation results which provide a better understanding of the... 

An extensive experimental investigation was conducted to study the effects of Dielectric Barrier Discharge (DBD), on the flow field of an airfoil at low Reynolds number. The DBD was mounted near the leading edge of a section of a wind turbine blade. It is believed that DBD can postpone the separation point on the airfoil by injecting momentum to the flow. The effects of steady actuations on the velocity profiles in the wake region have been investigated. The tests were performed at α = 4 to 36 degrees i.e. from low to deep stall angles of attack regions. Both surface pressure distribution and wake profile show remarkable improvement at high angles of attack, beyond the static stall angle of... 

Effects of dielectric barrier discharge plasma have been studied on the wake velocity profiles of a section of a 660 kW wind turbine blade in plunging motion in a wind tunnel. The corresponding unsteady velocity profiles show remarkable improvement when the plasma actuators were operating and the angles of attack of the model were beyond the static stall angles of the airfoil. As a result the drag force was considerably reduced. It is further observed that the plasma-induced flow attenuates the leading edge vortices that are periodically shed into wake and diminishes the large eddies downstream. The favorable effects of the plasma augmentation are shown to occur near the uppermost and... 

Effects of dielectric barrier discharge plasma have been studied on the wake velocity profiles of a section of a 660 kW wind turbine blade in plunging motion in a wind tunnel. The corresponding unsteady velocity profiles show remarkable improvement when the plasma actuators were operating and the angles of attack of the model were beyond the static stall angles of the airfoil. As a result the drag force was considerably reduced. It is further observed that the plasma-induced flow attenuates the leading edge vortices that are periodically shed into wake and diminishes the large eddies downstream. The favorable effects of the plasma augmentation are shown to occur near the uppermost and... 

The present study has been conducted to investigate the effect of inlet flow regimes on vertical velocity and concentration profiles of the turbidity current. Experiments carried out on small scale channel and Kaolin with a density of 2.65 kg/m3 and a mean particle diameter of 4.5 μm, was used to generate the currents. Velocities were obtained at a rate of 10 Hz using an acoustic Doppler velocimeter. Using the siphon sampling approach, the acoustic backscattering intensity was calibrated and concentration was determined using a backscattering analysis. Results showed that the ratio of maximum velocity height to the height of the current was around 0.4-0.5 in sub- and super-critical regimes.... 

We investigate heat transfer between parallel plates separated by liquid argon using two-dimensional molecular dynamics (MD) simulations incorporating with 6-12 Lennard-Jones potential between molecule pairs. In molecular dynamics simulation of nanoscale flows through nanochannels, it is customary to fix the wall molecules. However, this approach cannot suitably model the heat transfer between the fluid molecules and wall molecules. Alternatively, we use thermal walls constructed from the oscillating molecules, which are connected to their original positions using linear spring forces. This approach is much more effective than the one which uses a fixed lattice wall modeling to simulate the... 

Thermal conductivity, thermal dispersion, and structural effects in resin transfer molding (RTM) process are studied numerically. The injection part of the RTM process is modeled as a transport of resin flow through a fibrous porous medium in a long rectangular channel. The fluid flow is modeled using the Darcy-Brinkman-Forchheimer model and the heat transfer process using the energy equation based on local thermal equilibrium assumption. Both isotropic and anisotropic heat transfer in porous media are investigated. The governing equations are solved numerically for the isotropic heat transfer case and analytically for the anisotropic case. The numerical results are fitted to the available... 

Kinetic theory based numerical scheme such as direct simulation Monte Carlo (DSMC) and information preservation (IP) schemes properly solve micro-nano flow problems in transition and free molecular regimes. However, the high computational cost of these methods encourages the researchers toward extending the applicability of the continuumbased equations beyond the slip flow regime. In addition to correct velocity profile, the continuum-based equations should predict accurate mass flow rate magnitude. The secondorder velocity slip models derived from the kinetic theory provide accurate velocity profiles up to Kn=0.5; however, they yield erroneous mass flow rate magnitudes because the basic... 

This paper presents an analysis of the combined electro-osmotic and pressure-driven axial flows of viscoelastic fluids in a rectangular microchannel with arbitrary aspect ratios. The rheological behavior of the fluid is described by the complete form of Phan-Thien–Tanner (PTT) model with the Gordon–Schowalter convected derivative which covers the upper convected Maxwell, Johnson–Segalman and FENE-P models. Our numerical simulation is based on the computation of 2D Poisson–Boltzmann, Cauchy momentum and PTT constitutive equations. The solution of these governing nonlinear coupled set of equations is obtained by using the second-order central finite difference method in a non-uniform grid... 

The 3D simulation of the hydrodynamic behavior of a rotating disc contactor (RDC) by means of computational fluid dynamics (CFD) was investigated for the n-butanol-succinic acid-water (BSW) system. For the two-phase liquid-liquid flow, the velocity distribution of the continuous phase and drop size distributions were determined using the k-ω turbulence model in conjunction with the Eulerian-Eulerian approach and MUSIG model. In this system in which the holdup of the dispersed phase is low, the continuous phase velocity was computed by simultaneously solving the Navier-Stokes equations beside the different models of turbulence. The motions of the dispersed phase was calculated while... 

Density Current is formed when a fluid with heavier density than the surrounding fluid flows down an inclined bed. These types of flows are common in nature and can be produced by; salinity, temperature inhomogeneities, or suspended particles of silt and clay. Driven by the density difference between inflow and clear water in reservoirs, density current plunges clear water and moves towards a dam, while density current flows on a sloping bed. The vertical spreading due to water entrainment has an important role in determining the propagation rate in the longitudinal direction. In this work, two-dimensional steady-state salt solutions' density currents were investigated by means of... 

The boundary layer integral method is used to investigate the development of the turbulent swirling flow at the entrance region of a conical nozzle. The governing equations in the spherical coordinate system are simplified with the boundary layer assumptions and integrated through the boundary layer. The resulting sets of differential equations are then solved by the fourth-order Adams predictor-corrector method. The free vortex and uniform velocity profiles are applied for the tangential and axial velocities at the inlet region, respectively. Due to the lack of experimental data for swirling flows in converging nozzles, the developed model is validated against the numerical simulations. The... 

In this study, we have used a single link system with a pair of muscles that are excited with alpha and gamma signals to achieve both point to point and oscillatory movements with variable amplitude and frequency. The system is highly nonlinear in all its physical and physiological attributes. The major physiological characteristics of this system are simultaneous activation of a pair of nonlinear musclelike- actuators for control purposes, existence of nonlinear spindle-like sensors and Golgi tendon organlike sensor, actions of gravity and external loading. Transmission delays are included in the afferent and efferent neural paths to account for a more accurate representation of the reflex...