Sharif Digital Repository

Removing pollutants of water and, in general, wastewater treatment is one of the most important issues in the world. In this research, we synthesized a nanophotocatalyst based on znic-iron in the form of a magnetic core-shell Fe3O4@ZIF-8, and used to degrade the malachite green toxic color of wastewater. SEM, XRD and FT-IR analyzes have been taken and analyzed fore all three core, shell and core-shell composite catalysts.Due to the band gap of core-shell nanocomposite and the performance of the malachite green dye, a photocatalytic process under the visible light was obtained, which at an optimum amount of photocatalyst 0.003g, we reach 99.2% dye degradation at the 30ppm concentration. This... 

Sarcheshme Copper refinery is using ion exchange columns to supply deionized water to the refinery. Every day, 240 cubic meters of waste water from ion exchange columns process are released in nature. The main purpose of this research is to use membrane distillation to purify this wastewater, which reduces the fresh water requirement and at the same time prevents environmental pollution. Membrane distillation technology is capable to purify the high salinity wastewater that other conventional membrane technologies are not able to purify. In this study, the PTFE membrane was used due to its high permeability and low surface energy with pore size of 0.22 μm and membrane thickness of 0.2 to... 

Increased photo catalytic activity of NiO and 〖Co〗_3 O_4 were obtained by Ni〖Co〗_2 O_4 synthesizing and supporting functionalized multiwall carbon nano-tubes via calcinations followed by hydrothermal precipitation. NiO, 〖Co〗_3 O_4 and Ni〖Co〗_2 O_4 were prepared in the same procedure exactly for the subsequent photo catalytic activity to be compared to Ni〖Co〗_2 O_4/MWCNT later on. The photo catalytic degradation of Reactive Red 120 dye as a deazo organic pollutant model was used for experimental photo catalytic performance analysis. The CCD method was applied for experimental designing, modeling, and optimizing the operational parameters of the photo catalytic degradation of RR120 using... 

Discharging treated or raw waste water in to surface water may cause lots of serious problems, including growth of algae, as a result of the presence of nutrients in waste water.algae decrease the concentration of dissolve oxygen in water.phosphorus removal from waste water is of absolute necessity. according to the standards set by the environmental organization, discharge the untreated waster water in to the surface water is not allowed. on the other hand, given manager facilities of deprived area,effort is channeled to reach the desired result through designing the simplest treatment systems. anaerobic-aerobic systems have remarkably been used for many years in the treatment of urban and... 

Nowadays , application of enzymes as biocatalysts in wastewater treatment processes is increasing. It is economically important to reuse enzymes and increase their stability in these types of processes. Therefore, was immobilization of enzymes and using them in wastewater treatment have a great importance.In this project, Horseradish peroxidase enzyme, whose effect on phenol removal reactions in other studies has been proven before, was immobilized on the alginate-coated magnetic nanoparticles, to investigate the effect of immobilization on the stability and function of this enzyme for phenol removal. The enzyme was immobilized at the temperature of 25 ° C and pH = 8, according to the data... 

Pharmaceutical waste has attracted considerable attention, in the Past two decades. These pollutants had not previously been detected in the environment. In fact, the concentration of pharmaceuticals became a matter of concern after the increase in the production and consumption of drugs. Nowadays, considering their higher consumption and more developed detection technologies, they are found in waste water, treated water, rivers, etc. The purpose of this research is to study treatment of a Synthetic waste water contaminated by Diclofenac and Ibuprofen in a Moving Bed Biofilm Reactor. An aerobic Moving Bed Biofilm Reactor (MBBR) with the volume of 8.5 liters and Kaldness packing filling ratio... 

The main objective of this research was to evaluate the application of a new strain of Brevundimonas naejangsanensis which is newly identified sulfate-reducing bacteria (SRB), in chromium(VI) removal in contaminated wastewater. A laboratory scale packed bed reactor (PBR) was fabricated and operated to study the bacteria’s feasibility on chromium(VI) reduction and removal. The reactor was packed with polyurethane foam cubes and operated under different feeding and operating conditions of HRT, COD/〖SO〗_4^(2-) ratio and influent chromium(VI) concentration. A maximum chromium removal of 94.6% was achieved in the PBR when operated at an HRT of 24 h with COD/〖SO〗_4^(2-) ratio of .70 and influent... 

In this study, we investigate the effect of adding potassium persulfate (PDS) (K2S2O8) and hydrogen peroxide (H2O2) to E.coli (as a model microorganism) photocatalytic removal system in the presence of the TiO2-P25 as photocatalyst and UV irradiation. In this regard, the PDS and H2O2 oxidants were added separately in the different levels of pH and photocatalyst loading under UV irradiation. The experimental points were determined based on the central composite design (CCD) and in order to study the main and the interactive effects of the photocatalyst concentration (mg/L), oxidant concentration (mg/L) and the pH on the final concentration of E.coli (cfu/mL), a response surface model (RSM)... 

Microbial electrolysis cell- microbial fuel cell (MFC-MEC) coupled system is one of the novel method, for in-situ utilization from the wastewater and generating electricity and hydrogen simultaneously. In this system, required energy for microbial electrolysis cell supply by electric energy generated in microbial fuel cell. Implementation of this system is complicated, because of its unsteady state nature. In this study, it is demonstrated that the hydrogen production in such an MEC-MFC coupled sustem can be manipulated through adjusting the power input on the MEC. The power input of the MEC is regulated by adding MFCs connected into the circuit in series. When one MFC add to the coupled... 

The main objective of this project is the deposition of photo-catalysts on cement and concrete blocks with an emphasis on commercialization. We started with an extensive study of common methods introduced in previous literature, and conclude with a number of suggestions for industrialization. First, slurry and sol-gel deposition of the photo-catalysts on blocks of type 2 commercial cement which is one of the most used materials in construction of buildings and waste-water treatment plants has been examined to reach a method of sample formation. Due to the simplicity of common methods and low quality of formed samples (less than 5 percent aging efficiency), the obtained experience was used to... 

Today, membrane bioreactors (MBRs) process is one of the most important options in industrial and municipal wastewater treatment. In MBRs, membrane has an essential influence on their performance. In this study, polycarbonate was exploited as membrane to evaluate its performance in MBR since it has excellent mechanical properties. However, polycarbonate is brittle and breaks at low elongation at room temperature. Solution blending was utilized to improve polycarbonate’s properties. Blending membrane was characterized and assessed by scanning electron microscopy (SEM) and tensile strength. Polycarbonate solution blending with polyurehatne which has excellent toughness and flexibility enhance... 

In this project, Olive Mill Wastes (OMW) has been considered as a raw material for a bio-refinery. The project is consisted of a design section using SuperPro Designer software and an experimental section. The biorefinery was designed using the software after conducting a survey on the production of different value added material from OMW. The designed process consisted of xanthan gum, methane gas and agriculture fertilizer production. As much as 15000 L of the diluted OMW (to 50% of the initial concentration) is purified and 88 Kg xanthan gum (in 7 days), 2840 Kg methane gas and 200 Kg fertilizer in 25 days are produced at the same time.
In the experimental section, effect of applying... 

A Microbial fuel cell is a Bioreactor in which chemical bands are broken and their energy convert to electricity by bio-catalysts such as microorganisms and enzymes.In this project, construction, substrate investigation and optimization of operational parameters were done. Microbial fuel cell as a waste water treatment method was considered in this project. As a result, different substrate were used in anode chamber of constructed microbial fuel cell. The most important ones were waste water containing ethylene glycol and crude oil.Consequently, lack of information about cathode operational parameters was led to optimum condition selection for pH, buffer concentration and ionic strength as... 

Phenolic compounds are hazardous pollutants that are released into environment through wastewater discharges from variety of industries. Although good biodegradability has been reported at low concentrations, but at higher concentrations phenols are known to be antibacterial. In this study the Membrane Biological Reactor (MBR) with submerged hallow fiber membrane was operated at 25±2 ºC and pH=7.5±0.5 to treat a synthetic wastewater containing high phenol concentration (up to 5.9 g/l). Removal efficiency of phenol and COD were evaluated at four various “Hydraulic Retention Times” (HRT) of 24, 12, 8 and 4 hours. To test the tolerance of the bioreactor to phenol concentration various loading... 

Using microbial electrolysis cells (MEC) for hydrogen production has been considered in recent years. So far, synthetic wastewaters containing substances such as glucose and acetate have been mainly used in MECs and industrial wastewaters have not been widely studied. Food industry wastewater is a suitable choice for application in microbial electrolysis cell due to its biodegradable materials. In present research, dairy wastewater and sludge collected from UASB reactor of Iran Dairy Industries company, Tehran were initially used in a dual chamber microbial fuel cell until a stable voltage was generated .Afterward, the system was converted to a MEC applying a predetermined voltage. The... 

In recent years membrane bioreactors (MBR) were widely used as an advanced process for industrial wastewater treatment. But fouling issue causes some restrictions in these systems. So for fouling reduction many researches were done.In this study for fouling improvement, blending of hydrophilic polymer (PAN) with main polymer PVDF was used. Blending membrane in phase inversion process with DMAC as solvent and water as non-solvent was made. For pore-forming in membranes, PVP as hydrophilic additive with three different composition was added and then for more enhancement of antifouling property of membrane, TiO2 nanoparticles with four different composition were added to polymeric... 

In the presence project by using of hydrophilic polymer, Cellulose acetate (CA), we tried to modify the membrane made of Polyvinylidine fluoride (PVDF). The membranes were made by phase inversion method. In five levels, at least 10% and at most 30%, CA was added to casting solution. The hydrophilicity of membranes’ surface and pore size was increased. The permeation of the neat membrane of PVDF was less than 10 , on the other hand the permeation of the membranes, which were made by adding CA, was increased up to 500 . The increment of CA more than 20% reduced the porosity of membrane. In the next step to reduce the irreversibility fouling tried to reduce the pore size by adding some... 

In this research the performance of the Moving Bed Biofilm Rector (MBBR) in different amounts of dissolved oxygen (DO) was investigated. Reactor with a useful volume of 15 liters was used in this study. In order to obtain optimum oxygen concentration, stayed at 6, 10 and 15 hours, and at different levels of dissolved oxygen in the range 0.5 -6 mg/lit, the amount of organic material was removed respectively. Also, in two different aeration intensity of 3.5 and 5.5 liters per minute at different values of e% (percentage of filling of media) the mass transfer coefficient values were obtained. When the aeration intensity increases from 3.5 to 5.5 liters per minute, and the percentage of 40%... 

In this research performance of microbial fuel cells (MFCs) in continuous flow mode was studied. Different anodic chambers were tested and it was found that granular activated carbons (GACs) produced the highest power density (1228 mW/m3) in comparison with multiple anodes (731 mW/m3), single anode (294 mW/m3) and polymeric packings (40 mW/m3). It was also shown that in a plug-anodic chamber (PAC) the power output is reduced by reducing agitation of anodic volume. Adding more GACs to anodic chamber results in power increase, however by increasing occupied volume from 80% to 100% the power increase was negligible in result of cathodic reactions limitations. Feed flowrate was increased from... 

In the modern societies, wastewater treatment is essential in achieving high level of standard in environmental protection and disposal. Recently, many researches are performed to study the surfactants’ biological decomposition in wastewater treatment process. In this project, fixed bed aerobic reactors are used in order to remove surfactant from wastewater. Integrated fixed film activation sludge reactor (IFAS) is used to remove surfactants and organic matters. It also used to study the capability of micro organisms in organic load removal in fixed bed biofilm for biological treatment of industrial wastewater. Pumice stone were used as the support in the reactor. The pumice stone is a...