Sharif Digital Repository

Calcite is among the most abundant minerals organizing the oil reservoir formation and therefore its surface properties play a central role in the increase of the oil recovery efficiency. The effect of low-salinity water in carbonate rocks reveals that brine composition and salinity can improve the oil recovery in carbonates through wettability alteration. However, the specific mechanism for wettability changes that leads to improved oil recovery in calcite is not well understood. To obtain deeper insights at atomic level into the understanding the characteristics of the calcite-water interface, we performed classical molecular dynamics simulations in the presence of different ions in brine... 

Connate water has been coexisting with oil and mineral for centuries within underground reservoirs. The oil recovery techniques, such as low salinity water injection, disturb this prolonged equilibrium state of oil/brine/rock system. However, a thorough understanding of this complex equilibrium in the reservoir is still lacking. In this study, we performed molecular dynamics simulations to provide quantitative comprehension of the thin brine film characteristics that wets carbonate reservoir rocks at molecular level. While an electric double layer is formed at the interface of calcite/low salinity water, the ions in the high saline water form several aggregates of ions. We found that these... 

The efficiency of water flooding methods is known to improve by applying ion-tuned water injection. Although there is a consensus that such improvement happens through reversing reservoir wettability characteristics to more water-wet state, the true impact of ions is still ambiguous among contradictory debates. The well-known molecular dynamics (MD) simulation techniques would shed light on such ambiguities to gain deep atomic-scale understanding of the process. Results from MD simulations show that the presence of Na+ and Cl¯ ions leads to the formation of an electrical double layer in adjacency of calcite surface while Mg2+ ions dominantly make complexes with hydrocarbons throughout the... 

In this work, a new type of flooding system, "worm-like micelles", in enhanced heavy oil recovery (EOR) has been introduced. Application of these types of surfactants, because of their intriguing and surprising behaviour, is attractive for EOR studies. Fundamental understanding of the sweep efficiencies as well as displacement mechanisms of this flooding system in heterogeneous systems especially for heavy oils remains a topic of debate in the literature. Worm-like micellar surfactant solutions are made up of highly flexible cylindrical aggregates. Such micellar solutions display high surface activity and high viscoelasticity, making them attractive in practical applications for EOR. In this... 

Asphaltene deposition is an issue that has received much attention since it has been shown to be the cause of major production problems. It leads to permeability reduction under the processes of natural depletion as well as hydrocarbon gas/CO2 injection. Though a great deal of researches have focused on studying permeability impairment in reservoir rocks, little is known about the asphaltene deposition mechanisms that control the permeability reduction for Iranian reservoirs. In this work, an experimental effort is made to investigate the permeability impairment of core samples of Iranian oil reservoirs. The experiments are performed on both sandstone and carbonate rock types at reservoir... 

This work concerns simultaneous determination of relative permeability, capillary pressure, pore size distribution (PSD), and residual oil saturation data by optimization of well testing data, and introduces a new capillary pressure relationship, based on the Weibull distribution function, for direct determination of the PSD function from capillary pressure parameters. Three consecutive injection, fall off, and production well tests are performed on a predefined synthetic reservoir through simulation, and an optimization algorithm is used to find the parameters of relative permeability and capillary pressure curves as well as the value of residual oil saturation. The PSD function is also... 

Most of the reservoirs in Iran and also around the world are in the middle of their production life and have passed their natural production period. Therefore, they should be a candidate for immiscible injection, e.g., water injection for secondary recovery, and/or miscible injection, like solvent injection for tertiary recovery. Also, it should be pointed out that most of the Iranian reservoirs are carbonate reservoirs. This type of reservoir is fractured and heterogenic. Heterogeneity causes an earlier breakthrough and immiscible injection causes an unstable front, which leads to a lower recovery. This article presents the modified equation of Buckley-Leverett and fractional flow... 

In upstream oil industry, microorganisms arise some opportunities and challenges. They can increase oil recovery through microbial enhanced oil recovery (MEOR) mechanisms, or they can increase production costs and risks through reservoir souring process due to H2S gas production. MEOR is mostly known by bioproducts such as biosurfactant or processes such as bioclogging or biodegradation. On the other hand, when it comes to treatment of reservoir souring, the only objective is to inhibit reservoir souring. These perceptions are mainly because decision makers are not aware of the effect microorganisms’ cell can individually have on the wettability. In this work, we study the individual effect... 

The process of asphaltene precipitation has a substantial effect on oil flow during primary oil production and enhanced oil recovery processes in the petroleum industry. In this work, a modified scaling model based on the PVT properties of bottom hole live oil including resin to asphaltene ratio, onset pressure, bubble point pressure, reservoir temperature, asphaltene content of bottom hole live oil and gas to oil ratio has been proposed to account for asphaltene precipitation under pressure depletion/gas injection conditions and the proposed model was verified using experimental data obtained in this work and also with those reported in the literature. In the proposed scaling model the... 

In this paper, oil recovery and permeability reduction of a tight sandstone core sample in miscible CO2 flooding processes due to asphaltene deposition were studied using an Iranian bottom hole live oil sample in order to distinguish between the mechanical plugging and adsorption mechanisms of asphaltene involved in the interfacial interaction of the asphaltene/mineral rock system. A novel experimental method was designed and proposed to measure the amount of deposited asphaltene due to different mechanisms using the cyclohexane or toluene reverse flooding and spectrophotometer. In this work, the bottom hole live oil sample was injected first to a long core and then CO 2 injection was... 

Asphaltene deposition causes serious problems in the oil industry. Variation of oil composition and reservoir pressure is reported to be the most important factors that influence asphaltene deposition from reservoir oil. In this study, a mathematical model was developed to simulate asphaltene deposition during primary depletion and CO2 injection. The main purpose of this study is to investigate and to compare asphaltene deposition mechanisms due to primary depletion and CO2 injection. The solid model as thermodynamic model was applied to investigate asphaltene precipitation. A numerical model was established to the governing equations both in space and time and model parameters were... 

In this work, application of CO2 saturated with silica nanoparticles in continuous/water alternating gas (WAG) injection for heavy oil recovery was investigated which has been rarely attended in the available literature. Core displacement tests were conducted to monitor heavy oil recovery in both continuous and WAG injection schemes. It has been observed that for continuous nano-saturated CO2 injection, the oil recovery is higher than pure CO2 injection. This observation might be explained by alteration of rock wettability to a more water-wet condition. In WAG injection scheme, water breakthrough happened later in nano-saturated CO2 than pure CO2 injection. This delayed water breakthrough... 

In this study, the effect of different parameters on the fluid transport in a fractured micromodel has been investigated. All experiments in this study have been conducted in a glass micromodel. Since the state of wetting is important in the micromodel, the wetting experiments have been conducted to determine the state of wetting in the micromodel. The used micromodel was wet by water and non-wet regarding normal decane. The fracture network, distribution of pore size, matrix construction, and injection rate are the most important parameters affecting the process. Therefore, the influence of these parameters was studied using five different patterns (A to E). The obtained results from... 

In this work, phase-field method is used to develop a numerical model to simulate two-phase flow through a heterogeneous fractured porous medium. Various sensitivity analyses were performed to assess the impact of wettability, fracture aperture, interfacial tension, and water injection velocity on the displacement process. It was observed that the water mass imbibed into the matrix block varies linearly with time before the water front meets the outlet, known as “filling fracture” regime, which is captured for the first time in a numerical study. It is revealed that increasing the fracture aperture reduces water breakthrough time and oil recovery. © 2020 Taylor & Francis Group, LLC  

Production optimization is defined as the process of maximizing oil production over the long term while minimizing total production costs. The overall goal is to achieve the optimum profitability from the well or field. In this process, the reservoir system can be considered as a multiple input–output system. In this complex system injection and production wells are known as inputs and outputs. The output of the system is often affected by various parameters consisting reservoir conditions, petrophysics, and PVT data. The optimization of the injector rates and number and installation of submersible pumps are the main issues which have been studied in this paper. Determining the factor with... 

Nitrogen has emerged as a competitive gas injection alternative for gas-based enhanced oil recovery processes in the past two decades. The injection of nitrogen into the reservoirs has improved the oil recovery efficiency in various oil reservoirs from heavy to volatile oils. As it is known, interfacial tension (IFT) plays a key role in any enhanced oil recovery process, particularly gas injection processes; therefore, its accurate determination is crucial for the design of any gas injection process especially at reservoir condition. In this study, an axisymmetric drop shape analysis (ADSA) was utilized to measure the equilibrium IFTs between crude oil and N2 at different temperature levels... 

Steam injection process has been considered for a long time as an effective method to exploit heavy oil resources. Over the last decades, Steam Assisted Gravity Drainage (SAGD) has been proved as one of the best steam injection methods for recovery of unconventional oil resources. Recently, Fast-SAGD, a modification of the SAGD process, makes use of additional single horizontal wells alongside the SAGD well pair to expand the steam chamber laterally. This method uses fewer wells and reduces the operational cost compared to a SAGD operation requiring paired parallel wells one above the other. The efficiency of this new method in naturally fractured reservoir is not well understood.... 

The use of water-alternating-gas injection can potentially lead to improved oil recovery from the fields; simultaneous water and gas injection is a form of water-alternating-gas injection. However, there is still an incomplete understanding of these processes and the need for comparative work is inevitable. Core flood experiments and compositional simulations of water-alternating-gas and simultaneous water and gas processes are presented. Immiscible, near miscible, and miscible modes of injection are covered. Matching process is done and optimization of design parameters (injection rate, slug size, water-alternating-gas ratio, and injection gas) is performed. Experimental data demonstrate... 

CO2 injection is a potentially viable method of enhanced oil recovery for medium oil reservoirs. The authors compare the effect of gas injection strategy (simultaneous water-alternating gas [SWAG], water-alternating gas [WAG], and continuous gas injection [CGI]) on recovery in immiscible, near-miscible, and miscible modes of injection. It has been proved that CGI is not the most efficient injection scenario in oil-wet reservoirs. Miscible and near-miscible core flood tests demonstrated high oil recoveries in all injection strategies due to high capillary numbers achieved as a result of miscibility. The fluid mechanics of floods were discussed using pressure drop data, different mechanics was... 

A literature review of laboratory and field scale studies on low salinity water (LSW) injection showed that the salinity and composition of injected water can have a significant impact on oil recovery. Historically, extensive research has been completed to understand the mechanisms and factors affecting LSW injection. However, although numerous mechanisms have been proposed to describe the interactions in the target process, none have been widely accepted. In this study, waterflooding tests were used to investigate the advantages, disadvantages, and effect of LSW injection. In laboratory tests, two different brines and crude oil of one of Iran's southern reservoirs were used to assess the...