Sharif Digital Repository

Over 60% of the world's discovered oil reserves are held in carbonate reservoirs, which are mostly naturally fractured. Conventional water flooding results in low oil recovery efficiency in these reservoirs as most of them are oil-wet. On account of negative capillary forces, injected brine cannot penetrate simply into an oil-wet matrix of fractured formations to force the oil out. Wettability alteration of the rock surface to preferentially more water-wet state has been extensively studied using both smart water and surfactants separately. This study aims to study the effects of Mg2+ as one of the most important wettability influencing ions on the wetting properties of oil-wet carbonate... 

Recently much attention has been paid to the use of low salinity water (LSW) as an enhanced oil recovery fluid. The change observed in recovery factor during LSW flooding is induced from changes in relative permeability and capillary pressure when different levels of salinity are used. However, a few researchers tried to evaluate how macroscopic flow functions depend on the salinity of the injected water. To this end, a series of oil displacement by water was performed on a sandstone rock aged with crude oil in the presence of connate water. The capillary pressure and relative permeability curves are evaluated from inverse modeling of the obtained pressure drop and oil production data. Then,... 

Application of nano or biomaterials for enhanced oil recovery (EOR) has been recently much attended by petroleum engineering researchers. However, how would be the displacement mechanisms and how would change the recovery efficiency while nano and biomaterials are used simultaneously is still an open question. To this end, a series of injection tests performed on micromodel containing shale strikes. Three types of biomaterials including biosurfactant, bioemulsifier, and biopolymer beside two types of nanoparticles including SiO2 and TiO2 at different concentrations were used as injection fluids. The microscopic as well as macroscopic efficiency of displacements were observed from analysis of... 

Recently, a renewed interest arises in the application of nanotechnology for the upstream petroleum industry. In particular, adding nanoparticles to fluids may drastically benefit enhanced oil recovery (EOR) and improve well drilling, by changing the properties of the fluid, rocks wettability alteration, advanced drag reduction, strengthening the sand consolidation, reducing the interfacial tension and increasing the mobility of the capillary trapped oil. In this study, we focus on roles of clay nano-particles on polymer viscosity. Polymer-flooding schemes for recovering residual oil have been in general less than satisfactory due to loss of chemical components by adsorption on reservoir... 

Beside their worldwide abundance, oil recovery from fractured carbonate reservoirs is commonly low. Such reservoirs are usually oil-wet, thus, waterflooding leads into early breakthrough and low recovery due to the high conductivity of the fracture network, negative capillary pressure of the matrix and, consequently, the poor spontaneous imbibitions of water from fractures into the matrix during the course of waterflooding. In such problematic reservoirs, changing the wettability of the matrix toward water-wetness can improve spontaneous imbibition by changing the sign and, thus, the direction of capillary forces, resulting in an improvement of waterflood efficiency and, consequently, oil... 

A large amount of the discovered oil reserves are reserved in carbonate formations, which are mostly naturally fractured oil-wet. Wettability alteration towards more water-wet state reduces the capillary barrier, hence improving the oil recovery efficiency in such reservoirs. In this study, wettability alteration towards favorable wetting state was investigated by combining modified low salinity brine with surfactant during water flooding. The diluted brine was modified by increasing the concentration of Mg2+ and SO4 2−, individually as well as both ions in combination. Different brine formulations were tested experimentally through the observations of contact angle measurements and... 

The modification of the surface wetting characteristics in fractured oil-wet carbonate reservoirs, by reversing wettability from oil-wet to water-wet, leads to improved oil recovery. However, in order to obtain a successful oil recovery process, it is crucial to understand the active mechanisms of wettability alteration. This study looks at the effect of sulfate ions as one of the most promising wettability influencing ions on the wetting properties of oil-wet calcite; the effect is studied both with and without the presence of cationic surfactant and possible mechanisms of wettability alteration are explored. A number of analytical techniques were utilized to analyze the mineral surface... 

A literature review of laboratory and field scale studies on low salinity water (LSW) injection showed that the salinity and composition of injected water can have a significant impact on oil recovery. Historically, extensive research has been completed to understand the mechanisms and factors affecting LSW injection. However, although numerous mechanisms have been proposed to describe the interactions in the target process, none have been widely accepted. In this study, waterflooding tests were used to investigate the advantages, disadvantages, and effect of LSW injection. In laboratory tests, two different brines and crude oil of one of Iran's southern reservoirs were used to assess the... 

Environmentally responsive surface-modified nanoparticles are colloidal nanoparticles coated with, at least, two physicochemically distinct surface groups. Recent advances in the synthesis and production of nanoparticles have enabled the production of environmentally responsive surface-modified nanoparticles with both hydrophilic and hydrophobic surface groups. These nanoparticles act like colloidal surfactants. In this paper, environmentally responsive surface-modified silica nanoparticles are synthesized and used for enhancement of oil recovery. For this purpose, silica nanoparticles are coated with polyethylene glycol chains as hydrophilic agent and propyl chains as hydrophobic agent at... 

Wettability alteration in porous media is one of the mechanisms for enhancing oil recovery through injecting low-salinity water into carbonate reservoirs, in which active ions can remove the carboxylic oil component from the rock surface, altering the rock's wettability toward a water-wet condition. This study investigated the concomitant effects of low-salinity water and hydrophilic SiO2 nanoparticles on oil-wet dolomite rock. Results revealed that low-salinity water coupled with hydrophilic nano-SiO2 in oil-wet dolomite rock remarkably affected the wettability alteration of the rock, showing that the simultaneous presence of ions in water and hydrophilic nano-SiO2 led to considerable... 

Oil recovery from carbonate reservoirs can be enhanced by altering the wettability from oil-wet toward water-wet state. Recently, silica nanoparticle (SNP) suspensions are considered as an attractive wettability alteration agent in enhanced oil recovery applications. However, their performance along with the underlying mechanism for wettability alteration in carbonate rocks is not well discussed. In this work, the ability of SNP suspensions, in the presence/absence of salt, to alter the wettability of oil-wet calcite substrates to a water-wet condition was investigated. In the first step, to ensure that the properties of nanofluids have not been changed during the tests, stability analysis... 

The impacts of salinity adjustment of displacing fluid have recently gained special attention to enhanced oil recovery (EOR). Different mechanisms have been studied widely in the literature while some of them are still subjugated to more scrutiny. The effects of diluted sea water on the interfacial properties of brine and asphaltenic-acidic crude oil and the wettability alteration of carbonate reservoir rock are investigated in this experimental observational work. The measurements of interfacial tension (IFT) and contact angle (CA) as two main parameters are studied. Besides, the effects of asphaltene and resin in the crude oil on the IFT values between the crude oil and aqueous solution... 

Although several investigations have studied the low-salinity water injection (LSWI) performance during the past decades, the effect of crude oil type on the interfacial tension (IFT) and wettability alteration is still in dark. In this regard, this study is aimed to obtain the thermodynamic energies including adhesion, cohesion and spreading coefficient during LSWI. To achieve this goal, IFT and static contact angle values of three different crude oils (i.e. light, medium and heavy) are measured as a function of sea water salinity. The obtained results revealed that the dilution of sea water can change the wettability of reservoir rock from oil wet state towards water wet state, while crude... 

Recently, wettability alteration has been much attended by researchers for studying well productivity improvement in gas condensate reservoirs. Previous studies in this area only utilized water/alcohol based chemicals for this purpose. While, hydrocarbon nature of the blocked condensate in retrograde gas reservoirs, may motivate application of hydrocarbon based chemical agents. In this study, a new hydrocarbon based wettability modifier is introduced to alter wettability of carbonate and sandstone rocks to preferentially gas wetting condition. Static and dynamic contact angle measurements, spontaneous imbibition and core flooding tests were conducted to investigate the effect of proposed... 

Condensate and water banking around gas condensate wells result in vital well deliverability issues. Wettability alteration of near wellbore region to gas wetting condition is known to be the most novel and the only permanent method, to improve condensate well productivity. In this work, a water based nanofluid is used to change the wettability of sandstone reservoir rocks from strongly liquid wetting to intermediate gas wetting condition. Static contact angle measurements demonstrated significant increase of liquid phase contact angle as a result of chemical treatment with SurfaPore M nanofluid. The characteristics of SurfaPore M adsorption on sandstone rock are quantified through kinetic... 

This investigation is conducted on one of the southern Iranian oil fields, which experiences a fault on its gas cap. Therefore, no traditional gas injection and normal water injection for pressure maintenance is suggested. The target is set to inject special compatible and proper type of chemicals in each single well to avoid the pressure increase for the risk of oil and gas spill. Two different sources of aqueous phases, namely formation brine and sea water were used to find the effects of different brine composition on the main mechanisms of releasing the trapped oil, interfacial tension (IFT) and wettability alteration. The obtained results reveal that both the ionic liquid (IL) based... 

The wetting condition of the reservoir rock is the key to the success of any EOR technique and the ultimate oil recovery. Wettability is dictated by the surface chemistry related to the interactions between the fluids and the rock surface which determines the stability of the water film between the rock and the oil phase. Streaming potential measurement is one of the electrokinetic techniques used to determine the average zeta potential of porous rock which can provide reliable information on fluid-rock interaction and wettability state of the rock surface. Streaming potential measurement has recently been introduced in the oil reservoirs applications and there are still significant... 

Smart water injection is determined as an effective EOR process to change the wettability and interfacial tension for better micro/macro sweep efficiencies. This water contains reactive ions such as Mg ∧(2+), Ca ∧(2+) and SO-4 ∧(2-) which can act as potential determining ions and change the surface charge of calcite rocks. One of the major concerns in the execution of an effective waterflood, especially in tight carbonate reservoirs, is the incompatibility between the formation brine and the injecting water. This research work aims to investigate the most important challenge of waterflooding process related to the possible formation damage because of inorganic scale deposition during... 

The concerns for water availability, affordability and environmental consideration have motivated more research on the development of smart water injection for enhanced oil recovery process. Although wettability alteration has been considered as the dominant mechanism, there is an ample space in this area needs to be explored more. Therefore, a systematic series of experiments is designed and performed to examine the effect of salinity and ion type on the wettability of the carbonate rock surface to find the active mechanisms. For this purpose, the concentrations of different salts including NaCl, KCl, CaCl2 and MgCl2 are examined during 10 days of soaking for salts concentrations range of... 

Waterflooding has been regarded as an efficient method for pressure maintenance of oil reservoirs. x Improved techniques such as Smart Water flooding as a new EOR/IOR process has gained more momentum based on the recent research activities in this field and the reduction of oil price. Despite many efforts on achieving the governing mechanisms of Smart Water flooding in many individual fields, most of data are sparse and more possible mechanisms which explains all the interactions yet to be introduced. This experimental study used a systematic laboratory framework which is based on seawater treatments at fixed ionic strength to eliminate the ionic strength effects, NaCl considered as the...