Sharif Digital Repository

Acidizing of carbonate oil-wet rocks saturated with oil and saline formation water is subjected failure in some cases due to acid-induced damage such as sludge and emulsion formations. This condition may also lead to mineral precipitation, oil film barrier between acid and rock and diversion chemical malfunctions. Therefore, pre-flush process has been proposed as one of the most efficient stage for oil-wells matrix acidizing to reduce these challenges significantly. Besides, the pre-flush stage would result in more clean rock as the reservoir fluids are pushed back from the near wellbore regions, restoring rock wettability to more water wet state, preventing direct acid-oil contact and... 

Productivity of gas condensate reservoirs reduces significantly due to the near wellbore condensate/water blockage phenomenon. A novel, permanent solution to alleviate this problem is near wellbore wettability alteration of reservoir rocks to preferentially gas wetting conditions; industrial chemical materials are good candidates for this purpose, because of their eco-friendly characteristics, economical price, and mass production. In this paper, a comparative study is conducted on two industrial fluorinated chemicals, MariSeal 800 and SurfaPore M. Static and dynamic contact angle measurements, spontaneous imbibition, and core flooding tests were conducted to investigate the effect of... 

In the current study, a novel approach which takes into account the effectiveness of both convectional surfactants and biosurfactants was investigated. The biosurfactant produced by Enterobacter cloacae strain was utilized concomitant with conventional surfactant (sodium dodecyl benzene sulfonate (SDBS)) to evaluate its capability to reduce the SDBS adsorption on rock surface (biosurfactant acts as sacrificial agent) or synergistically enhance the effectiveness of the SDBS. In this regard, the wettability alteration and interfacial tension (IFT) measurements and calculation of spreading coefficient were performed considering two different scenarios. In the first scenario, SDBS was added to... 

Low salinity (LS) and smart water (SW) flooding processes which receive a great interest as cost-effective and environmental friendly techniques are relatively new enhanced oil recovery methods. Although shifting carbonate surfaces towards a water-wet state is the main mechanism behind these methods, effects of controlling factors (for instance: ion type or salinity) are already remained unsettled. In this regard, the effects of sulfate ion types (i.e. Na2SO4, MgSO4 and CaSO4) and their concentrations (i.e. 0–45,000 ppm) on wettability alteration are investigated using contact angle (CA) measurement technique. In addition, work of cohesion, work of adhesion and spreading coefficient of all... 

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study... 

Condensate and water banking around gas condensate wells result in vital well deliverability issues. Wettability alteration of near wellbore region to gas wetting condition is known to be the most novel and the only permanent method, to improve condensate well productivity. In this work, a water based nanofluid is used to change the wettability of sandstone reservoir rocks from strongly liquid wetting to intermediate gas wetting condition. Static contact angle measurements demonstrated significant increase of liquid phase contact angle as a result of chemical treatment with SurfaPore M nanofluid. The characteristics of SurfaPore M adsorption on sandstone rock are quantified through kinetic... 

This investigation is conducted on one of the southern Iranian oil fields, which experiences a fault on its gas cap. Therefore, no traditional gas injection and normal water injection for pressure maintenance is suggested. The target is set to inject special compatible and proper type of chemicals in each single well to avoid the pressure increase for the risk of oil and gas spill. Two different sources of aqueous phases, namely formation brine and sea water were used to find the effects of different brine composition on the main mechanisms of releasing the trapped oil, interfacial tension (IFT) and wettability alteration. The obtained results reveal that both the ionic liquid (IL) based... 

The concerns for water availability, affordability and environmental consideration have motivated more research on the development of smart water injection for enhanced oil recovery process. Although wettability alteration has been considered as the dominant mechanism, there is an ample space in this area needs to be explored more. Therefore, a systematic series of experiments is designed and performed to examine the effect of salinity and ion type on the wettability of the carbonate rock surface to find the active mechanisms. For this purpose, the concentrations of different salts including NaCl, KCl, CaCl2 and MgCl2 are examined during 10 days of soaking for salts concentrations range of... 

Waterflooding has been regarded as an efficient method for pressure maintenance of oil reservoirs. x Improved techniques such as Smart Water flooding as a new EOR/IOR process has gained more momentum based on the recent research activities in this field and the reduction of oil price. Despite many efforts on achieving the governing mechanisms of Smart Water flooding in many individual fields, most of data are sparse and more possible mechanisms which explains all the interactions yet to be introduced. This experimental study used a systematic laboratory framework which is based on seawater treatments at fixed ionic strength to eliminate the ionic strength effects, NaCl considered as the... 

A large amount of the discovered oil reserves are reserved in carbonate formations, which are mostly naturally fractured oil-wet. Wettability alteration towards more water-wet state reduces the capillary barrier, hence improving the oil recovery efficiency in such reservoirs. In this study, wettability alteration towards favorable wetting state was investigated by combining modified low salinity brine with surfactant during water flooding. The diluted brine was modified by increasing the concentration of Mg2+ and SO4 2−, individually as well as both ions in combination. Different brine formulations were tested experimentally through the observations of contact angle measurements and... 

The modification of the surface wetting characteristics in fractured oil-wet carbonate reservoirs, by reversing wettability from oil-wet to water-wet, leads to improved oil recovery. However, in order to obtain a successful oil recovery process, it is crucial to understand the active mechanisms of wettability alteration. This study looks at the effect of sulfate ions as one of the most promising wettability influencing ions on the wetting properties of oil-wet calcite; the effect is studied both with and without the presence of cationic surfactant and possible mechanisms of wettability alteration are explored. A number of analytical techniques were utilized to analyze the mineral surface... 

A literature review of laboratory and field scale studies on low salinity water (LSW) injection showed that the salinity and composition of injected water can have a significant impact on oil recovery. Historically, extensive research has been completed to understand the mechanisms and factors affecting LSW injection. However, although numerous mechanisms have been proposed to describe the interactions in the target process, none have been widely accepted. In this study, waterflooding tests were used to investigate the advantages, disadvantages, and effect of LSW injection. In laboratory tests, two different brines and crude oil of one of Iran's southern reservoirs were used to assess the... 

Oil recovery from carbonate reservoirs can be enhanced by altering the wettability from oil-wet toward water-wet state. Recently, silica nanoparticle (SNP) suspensions are considered as an attractive wettability alteration agent in enhanced oil recovery applications. However, their performance along with the underlying mechanism for wettability alteration in carbonate rocks is not well discussed. In this work, the ability of SNP suspensions, in the presence/absence of salt, to alter the wettability of oil-wet calcite substrates to a water-wet condition was investigated. In the first step, to ensure that the properties of nanofluids have not been changed during the tests, stability analysis... 

There are increasing evidences that adjusting the chemistry of the injecting water improves the oil recovery efficiency. However, the underlying mechanisms for this technique which is referred to as "smart waterflood" have not yet been thoroughly understood. It is needed to explore the role of individual ions through set of different tests, to find the right mechanisms behind "smart waterflood". This study is focused on the fluid/solid (carbonate) interactions through systematic wettability measurement. Contact angle measurements accompanied by spontaneous imbibition tests were employed to determine the role of individual monovalent and divalent ions in wettability alteration process by... 

Over 60% of the world's discovered oil reserves are held in carbonate reservoirs, which are mostly naturally fractured. Conventional water flooding results in low oil recovery efficiency in these reservoirs as most of them are oil-wet. On account of negative capillary forces, injected brine cannot penetrate simply into an oil-wet matrix of fractured formations to force the oil out. Wettability alteration of the rock surface to preferentially more water-wet state has been extensively studied using both smart water and surfactants separately. This study aims to study the effects of Mg2+ as one of the most important wettability influencing ions on the wetting properties of oil-wet carbonate... 

Recently much attention has been paid to the use of low salinity water (LSW) as an enhanced oil recovery fluid. The change observed in recovery factor during LSW flooding is induced from changes in relative permeability and capillary pressure when different levels of salinity are used. However, a few researchers tried to evaluate how macroscopic flow functions depend on the salinity of the injected water. To this end, a series of oil displacement by water was performed on a sandstone rock aged with crude oil in the presence of connate water. The capillary pressure and relative permeability curves are evaluated from inverse modeling of the obtained pressure drop and oil production data. Then,... 

Recently, a renewed interest arises in the application of nanotechnology for the upstream petroleum industry. In particular, adding nanoparticles to fluids may drastically benefit enhanced oil recovery (EOR) and improve well drilling, by changing the properties of the fluid, rocks wettability alteration, advanced drag reduction, strengthening the sand consolidation, reducing the interfacial tension and increasing the mobility of the capillary trapped oil. In this study, we focus on roles of clay nano-particles on polymer viscosity. Polymer-flooding schemes for recovering residual oil have been in general less than satisfactory due to loss of chemical components by adsorption on reservoir... 

Application of nano or biomaterials for enhanced oil recovery (EOR) has been recently much attended by petroleum engineering researchers. However, how would be the displacement mechanisms and how would change the recovery efficiency while nano and biomaterials are used simultaneously is still an open question. To this end, a series of injection tests performed on micromodel containing shale strikes. Three types of biomaterials including biosurfactant, bioemulsifier, and biopolymer beside two types of nanoparticles including SiO2 and TiO2 at different concentrations were used as injection fluids. The microscopic as well as macroscopic efficiency of displacements were observed from analysis of... 

Precipitation of asphaltene leads to rigorous problems in petroleum industry such as: wettability alterations, relative permeability reduction, blockage of the flow with additional pressure drop in wellbore tubing, upstream process facilities and surface pipelines. Experimentally determination of the asphaltene precipitation is costly and time consuming. Therefore, searching for some other quick and accurate methods for determination of the asphaltene precipitation is inevitable. The objective of this communication is to present a reliable and predictive model namely, the least - squares support vector machine (LSSVM) to predict the asphaltene precipitation. This model has been developed and...