Sharif Digital Repository

Current available models for simulation of the separation process in gas-liquid membrane contactor (MC) systems consider a uniform partial membrane wetting along the membrane length (Lmem). However, transmembrane pressure changes along the Lmem. Additionally, the available models usually consider a simplified uniform pore size to represent the micro-porous MC. Additionally, not all pores in a MC have the same size. In this study, a pore-scale network model is developed to simulate the physical separation of H2S using MCs by taking to account for (i) transmembrane pressure variation and (ii) pore size distribution of MC. The model results are compared with the experimental results of H2S... 

A very simple and well-controlled procedure was employed to prepare CdS nanoparticle/few-layer MoS2 nanosheet/Indium tin oxide (ITO) thin film heterostructures. To tune and fabricate the CdS/MoS2(t)/ITO thin films with various surface topographies, first electrophoretic deposition (EPD) was used to deposit MoS2 nanosheets on the ITO substrate under an optimized applied potential difference (8 V) for different deposition times (t) of 30, 60, 120 and 240 s. Then, CdS nanoparticles were deposited via a successive ion layer adsorption and reaction (SILAR) technique. The highest photo-current density of 285 μA cm-2 was measured for the CdS/MoS2(60 s)/ITO sample, which was about 2.3 times higher... 

Wettability is one of the most important factors which significantly influences solar still efficiency. Moreover, it determines the condensation mode, i.e., filmwise or dropwise condensation. In the present study, materials with different wettability were applied as the condensing surface to evaluate the effect of wettability on the distillate production of a single slope solar still. To compare the effects of dropwise and filmwise condensation on the condensate yield, the wettability of the condensing surface was changed by applying a nano-silicon solution according to a dip coating technique. All the experiments were conducted at three surface inclination angles. The results revealed that... 

Solar stills are considered an environmentally friendly technique to produce fresh water. The condensation surface plays an essential role in controlling the efficiency of the solar still. This main parameter is critically affected by the wettability of the condensation surface that affects the condensation mechanism, namely drop-wise or film-wise condensation. This study aims to enhance the efficiency of solar stills by altering the surface wettability hence changing the condensation mechanism using nanomaterials. In this experimental work, different condensation surfaces were coated by silicone nanoparticles to change the condensation mechanism from film to dropwise. Scanning electron... 

The condensation process is of great importance in many heat transfer devices in which a large amount of energy must be transferred. Furthermore, condensation is a crucial part of energy conversion and affects the energy efficiency of thermal desalination plants and solar stills. During the condensation process in solar stills, an essential part of the energy is transferred through the condensation surface to produce fresh water. Therefore, the condensation surface plays a significant role in the working efficiency of solar stills. The wettability of the condensation surface influences the condensation mechanism, which, in turn, affects the efficiency of solar stills. This study aims to... 

In the present study, the effect of two different kinds of surfactants namely conventional (Sodium dodecyl benzene sulfonate (SDBS)) and ionic liquid (IL)-based surfactants are investigated on the tertiary oil recovery using relative permeability concept. In this way, besides the Amott wettability index measurement, unsteady state core flooding tests are performed to not only find the effect of surfactant injection on tertiary oil recovery, but also to investigate their effects on relative permeability of carbonate rocks. In addition, for more reliable conclusions regarding the possible mechanisms, interfacial tension (IFT), compatibility and emulsification tests are carried out as a... 

Low cost dispersed supported cobalt oxide nanocatalysts on activated carbon (AC) were prepared by two different methods: (1) combined impregnation and deposition–precipitation (IMP-DP) and (2) heterogeneous deposition–precipitation (HDP). XRD, TEM, FESEM, BET and Boehm techniques were used for the characterization of the support and the catalysts. Characterization analyses indicated the negative effect of the wet impregnation method on the IMP-DP technique for the preparation of catalysts for the total oxidation of cyclohexane in air. The catalysts prepared by HDP and IMP-DP methods were found to have significant differences in oxidation activity, morphology, particle size, and shape of... 

This research investigated the long-term environmental effects on the bond at the interface between fiber-reinforced polymer (FRP) and a masonry brick. Seven types of FRP fabrics were used and placed on the masonry brick using the wet lay-up technique. Unidirectional and bidirectional fibers made of aramid, carbon, and glass and also combination of these fabrics were used. A total of 525 specimens were exposed to five chemical solutions with pH values of 2.5, 7, 10, 12.5 and substitution sea water for 1, 3, 6, 9 and 12 months. A chamber was also used to simulate the ultraviolent (UV) radiation on the specimens. A series of single-lap shear tests were performed on these specimens to determine... 

A developed route to form TiO2 self cleaning coatings on polycarbonate substrates is reported. TiO2 coatings on plastics may find widespread application in auto and construction industries if possess desired photocatalytic and mechanical properties. A chemical surface treatment method was used to create hydrophilic groups on the surface. X-ray photoelectron spectroscopy showed the treatment led to the oxidation of surface groups. TiO2 deposition was based on wet coating using an anatase sol of TiO2 nanoparticles of 30 nm size. The sol was synthesized using a sol-gel route. A pre-coat of peroxotitanium complex was employed to improve adhesion and inhibit the substrate degradation. The coating... 

Alaboratory testing program was conducted to investigate the effects of microstructure on the water retention curve (WRC) and wetting-drying induced volume change in loess. The axis translation and vapor equilibrium techniques were adopted to control suction in the range of 0-400 kPa and 4-140 MPa, respectively. Hysteresis in the WRC of loess was observed for the entire range of suction studied. Compared to re-compacted loess, intact loess exhibits a more pronounced hysteresis in the suction range below 20 kPa, which can be explained by the ink-bottle pore neck effect or constricted pores. The hypothesis is supported by microstructural evidence of mercury intrusion porosimetry and scanning... 

Understanding the motion characteristics of fullerene clusters on the graphene surface is critical for designing surface manipulation systems. Toward this purpose, using the molecular dynamics method, we evaluated six clusters of fullerenes including 1, 2, 3, 5, 10, and 25 molecules on the graphene surface, in the temperature range of 25 to 500 K. First, the surface motion of clusters is studied at 200 K and lower temperatures, in which fullerenes remain as a single group. The trajectories of the motion as well as the diffusion coefficients indicate the reduction of surface mobility as a response to the increase of the fullerene number. The clusters show normal diffusion at the temperature... 

Palladium nanocatalysts supported on reduced graphene oxide (rGO), multi walled carbon nanotubes (MWCNT), and rGO/CNT composite were synthesized by a wet impregnation method using PdCl2 as a precursor. Palladium loading was 0.3 wt %, and the catalysts were reduced at 300°C. The catalysts were characterized by inductively coupled plasma, Brunauer-Emmett-Teller (BET) analysis, Fourier transform infrared spectroscopy, X-ray powder diffraction, transmission electron microscopy, temperatue-programmed reduction, temperatue-programmed desorption, and Raman spectroscopy. The performance of the catalysts was investigated for hydro-purification of crude terephthalic acid (CTA) containing... 

The impacts of dopant nanoparticles, graphene nanosheets (GNSs) and cobalt decorated-graphene nanosheets (CoGNSs), were studied in relation to the wettability and rheological behavior in low-Ag lead-free SAC0307 (Sn–0.3Ag–0.7Cu) solder paste. The solidification range of the solders was evaluated using differential scanning calorimetry. Phase identification in the solder bulk and interface of the solder and copper substrate was carried out by X-ray diffraction and energy-dispersive X-ray spectroscopy. Spreading properties and reactive wetting behavior along with the rheological properties of the solders were also studied. Results showed that the addition of both nanoparticles did not... 

In reservoirs that have been water flooded or gas injected, it is still a significant amount of the remaining oil. Water alternative gas injection is a tertiary oil recovery method which was used for the first time in Canada for recovering remained oil in place of reservoir. The pore-scale mechanisms of this process are not fully understood yet. Such knowledge is essential for accurate modelling of reservoir. In this study various experiments on the WAG process is carried out by means of high pressure glass type micromodel instrument. The micromodel apparatus in this experiment was capable to operate at pressures up to 3500 Psi and temperatures up to 85°C which is similar to conventional... 

Gas flooding is a practical secondary scenario for enhanced oil recovery. Channeling and fingering of the injected gas are the major problems facing this technique. These challenges can be mitigated by the injection of gas as foam. However, foam stability influences the overall efficiency of the process, which could be improved by nanoparticles (NPs). This work provides a theoretical and experimental analysis of the NPs wettability effects on foam behavior, in both static and dynamic states. The treated calcite (CaCO3) NPs along with a cationic surfactant (HTAB) were used for this purpose. By comparison of theoretical and experimental data, it was shown that the foam stability in the...