Sharif Digital Repository

Foam flooding has been applied as a promising method in enhanced oil recovery to obviate the challenges of gas flooding such as fingering, channeling and overriding. However, long-term foam stability is crucial for mobility control. In this work, the effective mechanisms on foam stability in the presence of CaCO3 nanoparticles were assessed both theoretically and experimentally. The static and dynamic behaviors of cationic surfactant (HTAB) foam in the presence of CaCO3 nanoparticles with different hydrophobicity were evaluated. The CaCO3 nanoparticles were treated with a series of long-chain fatty acids to generate a range of wettability. Afterward, the underlying mechanisms were revealed... 

Low Salinity Waterflooding (LSWF) has become a popular tertiary injection EOR method recently. Both fluid-fluid and fluid-rock interactions are suggested as the contributing mechanisms on the effectiveness of LSWF. Considering the contradictory remarks in the literature, the dominating mechanisms and necessary conditions for Low Salinity Effect (LSE) varies for different crude oil-brine-rock (CBR) systems. The aim of the present study is to investigate LSE for an oil field in the Middle East that is composed of separate sandstone and limestone layers. Contact angles and Interfacial Tension (IFT) are measured to have more insight on the CBR under investigation. Visual experiments were... 

Low Salinity Waterflooding (LSWF) has become a popular tertiary injection EOR method recently. Both fluid-fluid and fluid-rock interactions are suggested as the contributing mechanisms on the effectiveness of LSWF. Considering the contradictory remarks in the literature, the dominating mechanisms and necessary conditions for Low Salinity Effect (LSE) varies for different crude oil-brine-rock (CBR) systems. The aim of the present study is to investigate LSE for an oil field in the Middle East that is composed of separate sandstone and limestone layers. Contact angles and Interfacial Tension (IFT) are measured to have more insight on the CBR under investigation. Visual experiments were... 

Nanoparticulated TiO 2 fibers as one-dimensional long structures were introduced into TiO 2 P25 nanoparticle films using coelectrophoretic deposition. This prevented the usual crack formation occurring in wet coatings, and resulted in less porosity and higher roughness factor of the films that provided more favorable conditions for electron transport. The films used as the photoanode of a dye solar cell (DSC) produced 65% higher photovoltaic efficiency. TiO 2 fibers can be excellent binders in single-step, organic-free electrophoretic deposition of TiO 2 for DSC photoanode  

Recently much attention has been paid to the use of low salinity water (LSW) as an enhanced oil recovery fluid. The change observed in recovery factor during LSW flooding is induced from changes in relative permeability and capillary pressure when different levels of salinity are used. However, a few researchers tried to evaluate how macroscopic flow functions depend on the salinity of the injected water. To this end, a series of oil displacement by water was performed on a sandstone rock aged with crude oil in the presence of connate water. The capillary pressure and relative permeability curves are evaluated from inverse modeling of the obtained pressure drop and oil production data. Then,... 

Timber joints with glued-in rod connections provide an interesting technical solution for numerous structural applications, also under harsh environmental conditions; yet little research is available on this topic. This paper experimentally investigated the effect of exposure to seawater wetting/drying cycles and seawater wetting/drying plus UV radiation cycles on the pull-out performance of glued-in rod timber connections. Three rod diameters, three anchorage lengths, and four exposures were considered, leading to manufacturing and testing a total of 189 specimens. The quasi-static monotonic pull-out resistance of joints was a function of rod diameter and anchorage length as well as... 

In this study, some new aspects of adsorption of a fluorochemical onto carbonate rocks as a wettability alteration agent to a gas wetting condition with the potential application for reduction of condensate blockage in gas condensate reservoirs are presented. To achieve this, kinetics, equilibrium, and thermodynamic of the adsorption process besides contact angle, imbibition, and characterization tests are investigated. Results of adsorption experiments revealed that kinetics behavior of the utilized fluorochemical–calcite system obeyed the pseudo-second order kinetics model. There was no change in adsorption after about 20 h. Also, the intraparticle diffusion mechanism was not the only rate... 

Although static characterization of reservoirs is an inevitable part of any reservoir studies, the most robust models of the reservoirs can be obtained through integrating static and dynamic data. The following study which is done in a heterogeneous carbonate reservoir utilizes the capillary pressure and relative permeability data to verify the task of static rock typing and investigate the role of hydraulic units in capillary pressure and relative permeability modeling. For this purpose, at first, various rock typing techniques are applied to the field data to seek the best method which has the most consistency with capillary pressure curves. Using Desouky method which is based on hydraulic... 

In this work, the silver particle absorption and antibacterial activity of cotton fabric when modified by low temperature plasma were investigated. The modification consisted of plasma pre-functionalization followed by one-step wet treatment with silver nitrate solution. Oxygen and nitrogen were used as the working gases in the system, and the results were compared. The results showed that nitrogen plasma-treated samples can absorb more silver particles than oxygen-treated samples, and thus the antibacterial activity of the samples in this case, which was analyzed by the counting bacteria test, was increased considerably  

In this work, the synthesis and characterization of a new nanocomposite from carbon nanotubes-graft-polymer (CNTs-g-P) is reported. The products were obtained by the filling of multi-walled carbon nanotubes (MWCNTs) (inner diameter 2040 nm) with CoFe2O4 magnetic nanoparticles, been grafted with poly (caprolactone). The filling process was carried out by using acid treatment through wet chemistry. The structure and the properties of the new nanocomposite were studied with TEM, VSM, TGA, and spectroscopic techniques. © 2009 World Scientific Publishing Company  

Microscopic and macroscopic displacements of polymer flooding to heavy oil at various levels of salinity and connate water saturation have been investigated. Both oil-wet and water-wet conditions in fractured five-spot micromodel systems, initially saturated with the heavy crude oil are utilized. The primary contribution is to examine the role of salinity, wettability, connate water, and fracture geometry in the recovery efficiency of the system. The microscopic results revealed that the increase in the connate water saturation decreases the oil recovery, independent of the wettability conditions. Moreover, the increase in salinity of the injected fluids lowers the recovery efficiency due to... 

In this article an attempt was made to fabricate defect-free asymmetric polysulfone (PSf) membranes for the separation of oxygen and nitrogen. The approach is based on the enhanced delayed demixing by blending surface modifying macromolecules (SMMs) in the casting solution and by immersing the cast film in isopropanol for a certain period before it is immersed in water. Different SMMs, including hydrophobic and charged SMMs, were synthesized, characterized, and blended to the host PSf. It was found that the charged SMM could indeed contribute to the removal of defective pores from the skin layer and enhancement of oxygen/nitrogen selectivity. The experimental results were further interpreted... 

Integrally skinned asymmetric membranes for the separation of O 2 and N 2 were fabricated by the phase inversion technique from polysulfone, polyetherimide, and polyimide. Two types of surface modifying macromolecules (SMMs) including hydrophilic SMM (LSMM) and charged SMM (cSMM) were synthesized and blended with the casting solution to modify the membrane surface. The cast film was then immersed in the first coagulant alcohol (methanol, ethanol, or isopropanol) for a predetermined period, before being immersed in the second coagulant (water). The SMMs used in these experiments were laboratory synthesized by the two-step process of polyurethane prepolymer synthesis and end capping, before... 

During any microbial enhanced oil recovery process, both cells and the metabolic products of bacteria govern the tertiary oil recovery efficiency. However, very accurate examination is needed to find the functionality of these tiny creatures at different reservoir conditions. In this regard, the effect of cell structure on ultimate microbial recovery efficiency which is the most dominant mechanism based on the microorganism types (gram-negative or gram-positive) was systematically investigated. At the first stage, possible different active mechanisms using Bacillus stearothermophilus SUCPM#14 strain were tested using specially designed injection protocol, in situ and ex situ core flooding... 

In this report the wetting behaviour between polycrystalline alumina substrates and molten aluminium doped with magnesium as a wetting agent has been studied using the sessile drop technique. The time required for equilibrium attainment is investigated. To explore the formation of possible phases at the interface, electron microscopic studies along with EDX analysis have been employed. It is found that magnesium reduces the time and temperature required for equilibrium in the Al/Al2O3 system. The Al-7 wt% Mg and Al-10 wt% Mg alloys can wet alumina at temperatures as low as 900 °C. It is also found that molten aluminium doped with magnesium can wet polycrystalline alumina at temperatures... 

In this report, sessile drop technique was employed to study the wetting of alumina by pure aluminium. Contact angle of pure aluminium on the surface of polycrystalline alumina substrate was studied in the temperature range of 750-1100 °C. Electron microscopy and EDX analysis were employed to examine the possible reactions at the melt-substrate interface. It was found that at temperatures in excess of 1050 °C molten aluminium can wet alumina. No reaction layer was detected at the Al/Al2O3 interface. © 2007 Elsevier B.V. All rights reserved  

In the present research, the influence of nanodiamond (ND) and a physical hybrid of ND and fumed nano-SiO2 were investigated on the performance of a typical tire tread compound. The styrene-butadiene rubber (SBR) and cis-butadiene rubber (BR) blend filled with a commercial grade highly dispersive silica at 70 phr loading were used as typical tire tread compound. ND was substituted partially with silica at two different concentrations of 5 and 10phr. Meanwhile, 5 phr of ND/nano-SiO2 hybrids with the weight ratio of 2.5/2.5 and 1/4 were substituted with silica. ND-Filled compounds exhibit increased scorch and cure time compared to controls. Improvement in different characteristics of the... 

Increasing concerns about global warming and environmental pollution control has pushed the relevant organizations to set regulations and to develop programs for energy saving. In addition, for many high energy using appliances, energy labeling provides the end user with important data to select energy-efficient equipments and encourage the manufacturers to enhance the performance of their productions. In this research, a new energy-saving program for wet cooling towers has been developed. Considering a thermo-hydraulic analysis, a novel Energy Index (IE) has been extracted which takes all aspects of the problem into account. The present index can be used as a proper criterion for energy... 

Increasing concerns about the lack of energy resources, global warming and environmental pollution have pushed the relevant organizations to develop energy saving strategies such as energy labeling programs. In this research, a new energy labeling program is developed and evaluated for the wet cooling towers in Iran. The cooling tower parameters, including its cooling capacity and the fan power consumption, are measured using an experimental setup. The experimental data are standardized to compensate the effect of the ambient wet bulb temperature on the cooling tower performance which cannot be controlled during the experiments. The results show that the cooling tower capacity and the fan... 

In this study, effect of desiccant wheel, heat exchanger and cooling coil will be evaluated on decreasing the wet bulb temperature of entering air to cooling tower and decreasing the outlet cold water temperature. For this purpose, change effect of desiccant wheel parameters will be investigated on wet bulb temperature of outlet air from heat exchanger. After that, optimum parameters and minimum wet bulb temperature will be selected. Then, outlet cold water temperature will be achieved for various cooling coil surface temperature with definition of by pass factor and also by using optimum desiccant wheel parameters and entrance air wet bulb temperature to tower related to cooling coil...