Sharif Digital Repository

We present a quantitative analysis on the response of a dilute active suspension of self-propelled rods (swimmers) in a planar channel subjected to an imposed shear flow. To best capture the salient features of the shear-induced effects, we consider the case of an imposed Couette flow, providing a constant shear rate across the channel. We argue that the steady-state behavior of swimmers can be understood in the light of a population splitting phenomenon, occurring as the shear rate exceeds a certain threshold, initiating the reversal of the swimming direction for a finite fraction of swimmers from down- to upstream or vice versa, depending on the swimmer position within the channel.... 

This paper presents a Data Width-aware Register file Protection (DWRP) technique to cope with Multiple Bit Upsets (MBUs) occurring in the register file of embedded processors. The DWRP technique has been proposed based on the fact that there are often a significant number of bits in the register file, which are not fully occupied by data. The DWRP technique efficiently exploits these available free bits for reliability enhancement purposes. In this regard, every register is equipped with three extra tag bits to specify the amount of available free bits in a register. Then the appropriate parity or hamming code is used based on the information of the tag field to protect the register file... 

Heave plates are structural components used for reducing the vibrations caused by environmental forces on marine and offshore structures by changing the hydrodynamic properties. The fact that the added mass increase via heave plates does not always lead to the structural response reduction underscores the role of damping in maintaining the vibration amplitude within allowable limits. In the present experimental study, a novel combined rigid-elastic design is used to improve the damping through the velocity increase in the elastic part and added mass creation in the central rigid part. The desired percentage of total added mass and damping can be adjusted by changing the rigid-to-elastic... 

Heave plates are structural components used for reducing the vibrations caused by environmental forces on marine and offshore structures by changing the hydrodynamic properties. The fact that the added mass increase via heave plates does not always lead to the structural response reduction underscores the role of damping in maintaining the vibration amplitude within allowable limits. In the present experimental study, a novel combined rigid-elastic design is used to improve the damping through the velocity increase in the elastic part and added mass creation in the central rigid part. The desired percentage of total added mass and damping can be adjusted by changing the rigid-to-elastic... 

Heave plates are structural components used for reducing the vibrations caused by environmental forces on marine and offshore structures by changing the hydrodynamic properties. The fact that the added mass increase via heave plates does not always lead to the structural response reduction underscores the role of damping in maintaining the vibration amplitude within allowable limits. In the present experimental study, a novel combined rigid-elastic design is used to improve the damping through the velocity increase in the elastic part and added mass creation in the central rigid part. The desired percentage of total added mass and damping can be adjusted by changing the rigid-to-elastic... 

Advanced Static Var Compensators (ASVCs) are used to improve transient stability of power systems. Transient stability enhancement is one of such applications which employs Flexible AC Transmission System (FACTS). This paper proposes a new method for calculating the current references for an ASVC. These current references are calculated based on Transient Energy Function (TEF). The simulations have been carried out using C++ and Matlab Sirnulink, and the corresponding results are provided. © 2003 IEEE  

Heave plates are structural components of a floating structure whose primary purpose is to increase damping and added mass in heave or pitch direction. If multiple plates are stacked along a common axis, then the relative diameters and spacing in between are important factors affecting the performance. In the present study, hydrodynamic coefficients of single, double and triple disks are experimentally investigated in different arrangements as Uniform, Concave and Convex edge shapes. It is observed that each disk in a multiple arrangement with lower diameter ratio have better hydrodynamic performance compared to the cases with higher diameter ratio when the spacing is small compared to the... 

Multiple co-axial heave plates of uniform geometry are attached to offshore platforms for inducing damping and added mass. These effects generally decrease the magnitude of the dynamic response of the platform under applied environmental excitation forces. When spacing between heave plates is decreased the damping and added mass performance are altered due to their strong vortex interaction. A new non-uniform plate configuration is proposed that may create different hydrodynamic characteristics. The modes of vortex shedding around plate edges in a non-uniform arrangement under forced harmonic oscillation are investigated via the CFD method. Furthermore, a new simplified formula for the total... 

The paper presents the application of a rule- based control scheme for an Advanced Static Var Compensator (ASVC) to improve power system transient stability. The proposed method uses a current reference, based on the Transient Energy Function (TEF) approach. The proposed scheme provides, also, a continuous control of the reactive power flow. The performance of the proposed approach is compared with that of a system using a conventional control method and of a system without ASVC. A single-machine system and an IEEE three machine system are used to verify the performance of the proposed method. © Sharif University of Technology  

Multiple co-axial heave plates of uniform geometry are attached to offshore platforms for inducing damping and added mass. These effects generally decrease the magnitude of the dynamic response of the platform under applied environmental excitation forces. When spacing between heave plates is decreased the damping and added mass performance are altered due to their strong vortex interaction. A new non-uniform plate configuration is proposed that may create different hydrodynamic characteristics. The modes of vortex shedding around plate edges in a non-uniform arrangement under forced harmonic oscillation are investigated via the CFD method. Furthermore, a new simplified formula for the total... 

Multiple co-axial heave plates of uniform geometry are attached to offshore platforms for inducing damping and added mass. These effects generally decrease the magnitude of the dynamic response of the platform under applied environmental excitation forces. When spacing between heave plates is decreased the damping and added mass performance are altered due to their strong vortex interaction. A new non-uniform plate configuration is proposed that may create different hydrodynamic characteristics. The modes of vortex shedding around plate edges in a non-uniform arrangement under forced harmonic oscillation are investigated via the CFD method. Furthermore, a new simplified formula for the total... 

Advanced static VAR compensators (ASVCs) are used to improve the transient stability of electric power systems. In this paper we present a new control strategy, which has superior performances compared to the conventional control techniques for these systems. The proposed method utilizes a novel current reference based on the transient energy function (TEF) approach. It also includes the voltage limits in the optimizing process using the Lyapunov theory and linear programming. In addition, it is optimized considering the permissible system conditions. A continuous control of the reactive power flow is also achieved. The proposed ASVC is modeled in single-machine and multimachine systems. In... 

In this study, magnesium oxide (MgO) nanoparticles are incorporated on carbon nanotubes (CNTs) to reinforce Mg-3Zn-1Mn alloy (ZM31 alloy) by semi-powder metallurgy, followed by hot extrusion, with the purpose of improving the mechanical and biological properties of Mg-based alloy. The microstructural analysis of the nanocomposites indicated a reduction in grain size of Mg alloy with the incorporation of CNTs with a maximum reduction of 61% (ZM31/CNTs), with further reduction in grain size (68%) detected when MgO integrated CNTs composites (ZM31/MgO-CNTs). The compression characteristics of the composites indicate an increase in ultimate compressive strength of 36% and 44%, respectively, with... 

In this article, a dual-band sixth order double symmetric T-slot filter is proposed for the 5G communication systems. This filter contains two duplicate square resonators and a T-shape feedline on the Rogers RT duroid 5880 substrate. Operating at the 28 and 38.5 GHz frequencies from licensed 5G frequency bands and small size make this filter appropriate for different 5G applications. Furthermore, an LC equivalent circuit for the filter has been considered that helps us to have a better sight of this filter. Measurement results show good agreement with simulations. The attenuation on the passband is less than 1 dB. In order to evaluate the filter performance besides other millimeter waves... 

Simvastatin, a well-known antihyperlipidemic drug, has antibacterial activity against a broad range of bacteria, especially Staphylococcus aureus. In present study, a nanoemulsion gel-based formulation containing Simvastatin was developed for infected wound therapy. Therefore, different formulations of Simvastatin nanoemulsion were prepared. Based on droplet size, polydispersity index and zeta potential, the best nanoemulsion formulation containing Simvastatin was selected for development of nanoemulsion gel formulation of drug using carbomer 934 as gelling agent. Thermodynamic stability of Simvastatin nanoemulsion was assessed at different conditions. The in vitro antibacterial activity...