Sharif Digital Repository

In this study, the simulation of blood flow through a stenosed coronary artery and a bypass graft are discussed using fluid-structure interaction numerical method. Effects of the geometrical parameters of CABG surgery on hemodynamics have been studied. Investigated hemodynamic variables include shear stress on the vessel wall, the velocity profile in high-risk areas and the pathlines. Lower than 0.5 Pa shear stress on intimal layer of arteries causes the formation of plaque on the wall. Angle of 30 degrees and diameter ratio of bypass to host artery of 1:1 are proposed as the optimum geometry. The distance of the anastomosis from the site of occlusion has no effect on surgery. Also,... 

Increase of nonlinear loads has led rise of harmonic currents, voltage distortion and imbalance in power system. Those polluted nonsinusuidal environments have made electrical engineer and researchers to define new and more compelet definition of electrical power quantities such as power factor, apparent power, THD and … . The new definitions have resulted in new methods of power quality enhancement technique. IEEE-1459 Std. proposes definitions for electric power in sinusoidal, nonsinusoidal, balanced and unbalanced conditions which can be used for compensation of nonsinusoidal and unbalanced systems. This reaserch introduces a new method to obtain shunt active filter reference signal. This... 

In new generations of data storage systems, there is a tendency to integrate processing and storage elements. This is currently recognized with the commercial name of Hyperconverged Infrastructure, or HCI for short. The goal of this infrastructure is to meet the increasing requirements of data-intensive applications. As a new paradigm, HCI needs to incorporate different performance improvement techniques such as I/O caching. Contemporary I/O caching schemes are optimized for traditional storage architectures and do not prove optimal in a Hyperconverged Infrastructure. The main challenge of I/O cache in this kind of infrastructure is the distribution of its resources over an array of nodes... 

With the spread of threats against industrial control systems, preserving the security of these systems faces serious challenges. On the other hand, with the increase of communication between industrial control networks and external communication networks, the entry points of these networks have also increased and this exposes them to IP network threats. Beside that, traditional attacks on these systems, which generally occur by infiltrating the internal network, are also constantly changing and becoming more complex. These attacks mainly have a phase of hiding the attack from the monitoring systems, which eliminates the possibility of identifying the attacker's operations to a great extent... 

In recent years, due to urban expansion and population growth, number of floors and excavations depth has increased. Stabilization of excavations is one of the most important issues in geotechnical engineering. Today, one of the most widely used methods that is used in deep excavations is brace soil by steels and pretension them. In this thesis tries to evaluate static behavior of flexible supporting structures with pretension anchors by using PLAXIS2D, FLAC3D and GEOSTUDIO softwares. The objective of this modeling is better understanding the static behavior of walls, comparing the two and three dimensional modeling and the effect of corners of excavation on deformation. The results shows... 

In this research the effects of cooling slope angle and the temperature of molten steel on globular structure after holding the samples at semisolid state have been investigated. The globular structure of high speed steel in the form of rolled - annealed and as cast condition, has been investigated in the semisolid state. The results showed that the grain sizes of cooling slope samples were lower than the rolled- annealed samples after holding at semisolid temperature. On the other hand, rolled-annealed solid grains had better roundness compared with cooling slope samples. Dissolution of carbides in the austenite phase at grain boundary leads to formation of globular particles in the... 

In this study TiO2/SiO2 thin films were prepared by sol-gel method from Tetra isopropylortho Titanate(TIPT) as the principle of TiO2 material with Tera ethoxysilane(TEOS) as the principle of SiO2 material to achieve high scratch-resistant , antibacterial and self-cleaning surface area under the effect of various percentage of SiO2 . Film deposition was carried out using a dip-coating technique and heat-treatment was used at 700ºC to achieve crystalline of films with excellent adherence the of substrate.
The surface morphology of the films has been observed by Scanning Electron Microscope (SEM) and the tribological properties of the surface were investigated by Atomic Force Microscope... 

Many processes and real world systems indicate nonlinear behavior and operate either naturally in multiple regions or in a wide range of operation space. Modelling and control of these systems by nonlinear methods needs to have a deep insight. Furthermore, the nonlinear methods leads to complexity issues. To overcome these problems, multi-model methods are introduced which consist of two steps, decomposition and combination. In decomposition step, the complex system is divided into a set of simple models; in the combination step, the behavior of local models are combined. How to decompose to local models and how to combine them are two main questions in this area which not answered... 

By studying and evaluating methods for producing deuterium gas from heavy water, the electrolysis method with polymer membranes (PEM) was defined as the proposed method.The (PEMWEs) is a new method in electrolysis, which utilizes solid polymer electrolyte (SPE) membranes as electrolytes to play a significant role in reducing the resistivity in the electrolysis and also in comparison with alkaline electrolysis in terms of energy consumption and optimal being in condition is also a better condition for the purity of the produced gas.In this regard, a polymer electrolyte membrane water electrolysers (PEMWEs) was designed and developed on a laboratory scale. After analysis of the sample gas, and... 

The aim of this study was electrodeposition of Zn-Ni-P/Zn-Ni multilayer coatings by single-bath method from a citrate bath to produce a sacrificial coating with high barrier properties compared to Zn-Ni monolayer coating. The coatings that were prepared at 10 mA/cm2 was Zn-Ni-P (Ni-rich and percentage of zinc, nickel and phosphorus, respectively: 40, 50 and 10 %), and the alloy deposited in 60 mA/cm2 were practically Zn-Ni (Zn-rich, 85% zinc) and almost phosphorus free. Galvanostatic pulse deposition method through switching of the current density between the two values mentioned in monolayers (10 and 60 mA/cm2) in different time periods to create bilayers corresponding to the monolayers,... 

Electromagnetic levitation(EML) provides a process producing nanoparticles using gas condensation method. In gas condensation processes, vapor is produced by heating the sample then inert gas is applied to provide the inert atmosphere and also cool and condense the sample vapor into a nano powder to obtain a sample nanoparticle. In the EML method, rapidly alternating electromagnetic field induces eddy current in the conducting sample which will heat the sample. The current in the sample result in an induced magnetic field. Consequently, the sample droplet is heated and levitated simultaneously by an induction furnace as a generator. The sample temperature is dependent on parameters such as... 

In this study, DREAM model operation as a model to predict the occurrence of dust storms has been completed. The aim of this study is to identify capability of the model to predict dust storms in IRAN. The model has been run for June 2014 because on 2 June 2014, Tehran visited a dust storm with a speed of 111 kilometers per hour and yielded a huge economic losse. In this model, dust concentration,dust load and Aerosol Optical Depth(AOD) are calculated on an hourly basis. The model results do not captured the direct relationship between the average wind speed and dust Parameters and the model do not predict the dust storm on on 2 June 2014 in Tehran. The reason is that DREAM gets... 

In this research with Finite Element Methods in ABAQUS, numerical modeling has done in three-dimensions, which can be used to determine the effect of different factors on the surface settlement. Also, various factors such as geotechnical conditions, tunnel diameter,tunnel depth, the impact of the thickness of the segments and the amount of eccentricity of the structure relative to the longitudinal axis of the tunnel considered in this study. Face Pressure Supports, and Grout Injection Pressures are taken into account, too.Tunnel drilling causes a change in the displacement area and creates a changing zone around the tunnel. In this regard, not only adjacent buildings will be affected by... 

This study aims to propose a new correlation between in-situ horizontal stress and cone tip resistance in soils. Knowing the field in-situ stress state condition has an important role in stability assessment and stress-deformation analysis in a common geotechnical system. Although vertical stress could be measured easily, horizontal stress is still known as challenging work. Due to the difficulty in sampling undisturbed sand specimens, in-situ tests have been proposed in the previous literature to investigate the different characteristics of this soil. Cone Penetration Test (CPT) is one of the most used and accepted soil methods for soil investigation, identifying different soil parameters... 

Shallow geothermal energy is a renewable and sustainable form of energy that has the potential to help alleviate the growing climate and energy crisis. The most common system used to extract shallow geothermal energy is the ground source heat pump (GSHP) system. The concept of using underground structures in exploiting shallow geothermal energy for space heating and cooling has received increasing attention. This study focuses on the use of geothermal tunnels as a means of extracting shallow geothermal energy.This research examines the effects of different heat transfer mechanisms, and highlights the effects of this phenomenon by focusing on the effects of natural convection around the... 

The Effects of temperature, residence time and particle size has been investigated on partial reduction of hematite to magnetite VIA fluidized bed reactor. Since there is water crisis in Iran, it is not rational to use gravity separation processes. Rather the best way is to use magnetic separation. Ghazvin’s region non-coking coal was used for gasifying step in various temperatures in order to produce the gas reduction agent. Golgohr’s mine waste concentrate were tested as the initial iron ore. For the very first time, the residence time of the particles were investigated by the change of height of reaction chamber, in 3 different heights, and the highest i.e. 15 cm had the best results. As... 

The low female labor force participation rate in the Iranian labor market relative to the global average and even to countries that do not differ significantly from the socio-economic characteristics of our country is one of the important questions of the Iranian labor market. In this study, we seek to answer the question of whether the economic participation rate of married women will increase if the gender gaps in wages, job findings and job losses among women and men are eliminated in the Iranian labor market. To answer this question using household expenditure and income data and labor force data, we show that between the two categories of occupations, in terms of the share of women's... 

Numerous structures which are involved in seismic soil-pile-structure interaction have been destroyed. Considering complexities which exist in soil-pile interaction problems and lack of precise methods without imperfect bases, it is necessary to use numerical methods for analyzing soil-pile interaction problems. In this research, three-dimensional modeling and studying the effect of changing soil and pile parameters on the behavior of pile under earthquake loading is performed using finite difference software, FLAC3D. The soil in this model has a softening behavior. Real earthquake spectrum has been applied into the model as the acceleration time history at the bedrock level. The results of... 

Considering the environmental pollution caused by the consumption of fossil fuels, replacing clean and renewable energies instead of fossil fuels has become one of the most critical issues across the world. The use of energy geostructures, especially energy piles, to exchange the heat between the superstructures and the ground is one of the approaches for taking advantage of clean energy. In order to maintain the safety and the serviceability of structures built on energy piles, it is necessary to study the effects of heat exchange between energy piles and the ground on the mechanical behavior of energy piles, as well as the effects of various parameters on the interaction between energy...