Sharif Digital Repository

The present paper studies the impact of dynamic interaction between high-voltage substation equipment on the response and vulnerability of substation equipment. The 3D numerical model is developed for four types of vulnerable equipment in the both unconnected and connected conditions. The bus slider-rigid bus assembly is utilized to establish the connection between the equipment. The incremental dynamic analysis is carried out in the developed systems to produce the fragility function for each equipment. Also, the Monte Carlo approach is employed to evaluate the accuracy of the generated functions. It is concluded that the incorporation of connection parts in the model can significantly... 

This paper develops the seismic damage models of brick masonry veneer attached to the masonry infill without metal ties and assesses the life cycle cost of veneers subjected to earthquake excitation. Even though anchoring veneers to the backup wall has been prescribed in recent building codes, most of the existing brick veneers in seismic prone areas around the world lack the anchoring details. Besides, the damage and consequence models of masonry façades have not been presented in the FEMA-P58 database restricting detailed performance evaluation of buildings with unanchored masonry veneers. This study develops detailed finite element models to simulate various failure modes of the masonry... 

This paper proposes probabilistic damage and collapse models for reinforced concrete poles in electric power distribution networks and investigates the damage and collapse pattern of poles under earthquake excitations. To this end, detailed finite element models of the H-type reinforced concrete poles are developed and verified using past experimental studies as well as the observed damage in previous earthquakes. The models are then subjected to nonlinear static analyses to study the effect of the loading pattern, loading direction, concrete strength, and failure criteria on the capacity and the collapse pattern of the pole. Next, incremental dynamic analysis is carried out to investigate... 

In this work, steady state and dynamic performances of quaternary distillation column sequences designed based on steady state and dynamic cost functions have been investigated. To quantify the dynamic performance, product losses due to disturbances have been considered in the objective function. In addition, variations of operating costs such as utilities have been considered in the objective function. To separate a quaternary mixture into four products, 22 configurations have been used. It has been observed that the feed composition, disturbance frequency and magnitude affect the dynamic behavior strongly. To decrease the optimization computational load, a scheme that provides a suboptimal... 

A new procedure is proposed to quantify uncertainties involved in the seismic response of structures including ground motion and modeling variability. The advent of performance-based earthquake engineering (PBEE) and probabilistic seismic risk analysis necessitates consideration of uncertainties in predicting seismic responses. However, the high computational cost of conventional methods restricts their application to only simple numerical models. The present study employs the endurance time (ET) method concept to predict the response distribution which requires much less computational efforts than conventional methods. The proposed procedure for the quantification of record-to-record... 

In this work, we implement some analytical techniques such as the Exp-function, Tanh, and extended Tanh methods for solving nonlinear partial differential equation, which contains sine terms, its name Double Sine-Gordon equation. These methods obtain exact solutions of different types of differential equations in engineering mathematics  

A variational theory (VT), in which the potential energy of a real system is evaluated relative to the hard-sphere system, was used to investigate the medium's effects on the pair potential parameters. By adding the medium's effects to the isolated pair potential, the concept of an 'effective pair potential' (EPP) was introduced. The EPP parameters were compared with those of the average effective pair potential (AEPP) for Ar, which showed the importance of the medium effects and the long range interactions of the AEPP in dense fluids. The study showed that the depth parameter of the AEPP is much larger than that of the EPP  

Inclusion of nano-clays into hydrogels is an efficient approach to produce nanocomposite hydrogels. The introduction of nano-clay into hydrogels causes an increase in water absorbency. In the present work, Nanocomposite hydro-gels based on kappa-carrageenan were synthesized using sodium montmorillonite as nano-clay. Acrylamide and meth-ylenebisacrylamide were used as monomer and crosslinker, respectively. The structure of nanocomposite hydrogels was investigated by XRD and SEM techniques. Swelling behavior of nanocomposite hydrogels was studied by varying clay and carrageenan contents as well as methylenebisacrylamide concentration. An optimum swelling capacity was achieved at 12% of sodium... 

The performance of OFDM-based Wireless Local Area Networks (WLANs) is investigated by employing different smart antenna techniques at the receiver. The use of multiple antennas at the Access Point (AP) receiver in IEEE802.11a standard-compliant Single Input Multiple Output (SIMO) configuration, improves the physical layer performance in different channel scenarios and interference that may arise from other stations sharing the same frequency band. For this purpose, a comparative study of smart antenna architectures for IEEE802.11a WLAN system using pre-FFT and post-FFT array processing techniques is presented. Simulations are performed on a new model for IEEE802.11a system using a... 

γ-Alumina is used to catalyze the Cannizzaro reaction in the absence of any base under microwave irradiation in high yields. In the case of terephthalaldehyde the reaction is carried out with high selectivity  

In the present work, specimens were cut out from St-37 plates with 19 mm thickness. The thickness of plates was reduced to 12.5 mm by milling and grinding operations. Then a standard V-shaped fillet was made on one edge of the plates. Two plates were butt-welded by standard metal arc gas (MAG) welding process. Residual stresses induced by welding were measured on 20 specimens by centre hole drilling. Load controlled axial fatigue tests were carried out to determine the fatigue life of specimens. Crack growth rates were obtained from experiment. Fractography of specimens was performed. Genetic Algorithm (GA) was employed for prediction of residual stress value in weldments using the crack... 

The qualitative effects of residual stress parameters on fatigue crack growth are investigated using Monte Carlo probabilistic analysis technique. These parameters include the maximum residual stress,σ0, half-width of the tensile residual stress region, b, and the redistribution of residual stress parameter, β. A normal distribution is assumed for all parameters considered in the investigation and fatigue life is determined using Forman equation. The results indicate that: (i) fatigue life decreases nonlinearly if the mean of random maximum residual stress and the half-width of tensile residual stress region increases; (ii) fatigue life increases nonlinearly if the rate of residual stress... 

In this paper residual stresses induced by butt metal arc gas welding (MAGW), in accordance with ASTM E837, are determined by hole drilling. The results are analyzed by probabilistic methods. Also, the effect of fatigue life on relaxation of welding residual stress is investigated. The specimens are tested to measure fatigue life and crack growth rates in accordance with ASTM E466 for force controlled amplitude axial fatigue testing. © 2008 Verlag Stahleisen GmbH, Düsseldorf  

In this work effect of composition changes of injection gas, CH4 + CO2, on the performance of immiscible WAG injection in light oil, 41 oAPI, which has been rarely attended in the available literature is investigated. Presence of CO2 helps to reduce the MMP of CH4 significantly. Core flood experiments are conducted at reservoir conditions and fixed flow rate of 0.5cc/min on a sandstone sample with the brine concentration of 5000 ppm, and the influence of injection gas composition as well as WAG ratio on oil recovery is investigated. Different mole percents of methane in mixture, 0%, to 100% are examined, and the tests continued to ten alternate cycles with a slug size of 0.1 pore volumes and... 

The main scope of this study is to analyse muscle-driven forward dynamics simulation of stair locomotion to understand the functional differences of individual muscles during the movement. A static optimization was employed to minimize a performance criterion based on the muscle energy consumption to resolve muscle redundancy during forward dynamics simulation. The proposed method was employed to simulate a musculoskeletal system with ten degrees of freedom in the sagittal plane and containing 18 Hill-type musculotendon actuators per leg. Simulation results illustrated that simulated joint kinematics closely tracked experimental quantities with root-mean-squared errors less than 1 degree. In... 

The effect of the autofrettage process on high pressure cylinders has been investigated. Both numerical and experimental techniques have been used for the investigation. It was observed that the best autofrettage pressure for raising the pressure capacity of the cylinder was the pressure Py2 which is just sufficient to bring the outer surface of the cylinder to yielding. Pressures higher than Py2 will have the inverse effect. It was found that the number of autofrettage stages has no effect on pressure capacity. It was also shown that to reduce the flow stress within the wall of the cylinder, the autofrettage pressure must be greater than the working pressure. For pressures lower than... 

Hexapod robots gives us the ability to study walking robots without facing problems such as stability in many aspects. It has a great deal of flexibility in movement even if a leg becomes malfunctioned. Radially symmetric (hexagonal) hexapods have more flexibility in movement than rectangular leg alignments. Because of symmetry they can move in any direction and time efficiently. Inverse kinematic problem of this kind of hexapods is solved through a modular mobile view considering six degrees of freedom for the trunk. Then typical tripod and wave gaits are analyzed and simulated through the presented formulation. In Reinforcement Learning algorithm for walking it is important how to make... 

The expected phenomenology of noninteracting topological band insulators (TBIs) is now largely theoretically understood. However, the fate of TBIs in the presence of interactions remains an active area of research with novel, interaction-driven topological states possible, as well as new exotic magnetic states. In this work we study the magnetic phases of an exchange Hamiltonian arising in the strong interaction limit of a Hubbard model on the honeycomb lattice whose noninteracting limit is a two-dimensional TBI recently proposed for the layered heavy transition metal oxide compound (Li,Na) 2IrO 3. By a combination of analytical methods and exact diagonalization studies on finite-size...