Sharif Digital Repository

Environmental pollutions with heavy metals pose serious health and ecological risks. Sabzevar in the northeast of Iran has natural chromic mines and then chromium-polluted soils and groundwater. In the present work, the metal-tolerant bacterial strain KR2 was identified as Shewanella sp. following 16S rDNA gene sequence analysis. Bioremediation ability of isolated bacterial from agricultural soils that irrigated by groundwater, Shewanella sp., was evaluated for uptaking of chromium with varying Cr(VI) concentrations from 50 to 500 ppm in aerobic conditions (pH 7.0, 37 °C). The Shewanella sp. strain KR2 showed an obvious heavy metal tolerant in the wide range of heavy metals including: Cr6+,... 

We investigate the effect of wall roughness on water electrolyte transport characteristics at different temperatures through carbon nanotubes by using nonequilibrium molecular dynamics simulations. Our results reveal that shearing stress and the nominal viscosity increase with ion concentration in corrugated carbon nanotubes (CNTs), in contrast to cases in smooth CNTs. Also, the temperature increase leads to the reduction of shearing stress and the nominal viscosity at moderate degrees of wall roughness. At high degrees of wall roughness, the temperature increase will enhance radial movements and increases resistance against fluid motion. As the fluid velocity increases, the particles do not... 

We study the quantum nonlinear planar Hall effect in bilayer graphene under a steady in-plane magnetic field. When time-reversal symmetry is broken by the magnetic field, a charge current occurs in the second-order response to an external electric field as a result of the Berry curvature dipole in momentum space. We show that a nonlinear planar Hall effect originating from the anomalous velocity is caused by an orbital effect of an in-plane magnetic field on electrons in bilayer graphene in the complete absence of spin-orbit coupling. Taking into account the symmetry analysis, we derive the dominant dependence of the Berry curvature dipole moment on the magnetic field components. Moreover,... 

We investigate the effect of wall roughness on water electrolyte transport characteristics at different temperatures through carbon nanotubes by using nonequilibrium molecular dynamics simulations. Our results reveal that shearing stress and the nominal viscosity increase with ion concentration in corrugated carbon nanotubes (CNTs), in contrast to cases in smooth CNTs. Also, the temperature increase leads to the reduction of shearing stress and the nominal viscosity at moderate degrees of wall roughness. At high degrees of wall roughness, the temperature increase will enhance radial movements and increases resistance against fluid motion. As the fluid velocity increases, the particles do not... 

Despite various applications of hydrogels, they have poor gel strength and low resistance against crack propagation which lead to the limitation of their applications. For overcoming this inherent weakness, the current study has focused on the simultaneous utilization of interpenetrating polymer network (IPN) structure and nanocomposite hydrogels. It is known that IPN and nanocomposite gels can improve gel strength. The combination of IPN and nanocomposite structure was developed in hydrogels for improving gel strength. For this purpose, bentonite was successfully modified with a cationic surfactant, (3-methacrylamidopropyl) trimethyl ammonium chloride (MAPTAC), as intercalate, and... 

Despite the various uses of hydrogels, one of their weaknesses is the poor gel strength. To overcome this restriction, the current study has focused on simultaneously employing an interpenetrating polymer network (IPN) structure and nanocomposite hydrogels. Through this approach, the influence of nanofiller in the single network and IPN hydrogel properties was also studied in detail. For this purpose, a novel full interpenetrating polymer network (IPN) hydrogel nanocomposite based on 2-acrylamido-2-methylpropane sulfonic acid (AMPS)/acrylic acid (AA)–sodium acrylate (AANa) was synthesized in two steps through a facile solution polymerization with incorporation of modified bentonite (MBE) as... 

A lubrication model is used to study dewetting of an evaporating thin film layer over a solid substrate with a nanometer-scale topography. The effects of the geometry of the topography, the contact angle, the film thickness, and the slippage on the dewetting have been studied. Our results reveal that the evaporation enhances the dewetting process and reduces the depinning time over the topography. Also it is shown that the depinning time is inversely proportional to the slippage and increasing the contact angle may considerably reduce the depinning time, while the film thickness increases the depinning time  

Using non-equilibrium molecular dynamics simulations, we investigate the effects of nanotube size, mean flow velocity, ion concentration and temperature of an electrolyte water solution on shearing stress and nominal viscosity. It is shown that the distributed electric field arising from the electrolyte water solution has significant influences on fluid properties. Also, the temperature of the solution, which causes thermal movement, affects nanofluidic transport in nanoenvironments. The nominal viscosity and shearing stress increases as the tube diameter increases. When the temperature of solution increases or ion concentration decreases, the shearing stress and nominal viscosity increase.... 

The present article deals with super-swelling behavior of crosslinked homopolymer of 2-acrylamido-2-methylpropane sulfonic acid, poly(AMPS), in binary mixtures of dimethyl sulfoxide (DMSO) and various polar solvents including water, mono-, and polyhydric alcohols, and amide solvents such as N-methyl pyrrolidone. Extraordinary phase transition sequences including a new unusual swelling phenomenon, referred to as "overentrant" swelling, was observed for this polymeric organogel in the solvent/DMSO mixtures. The swelling behaviors were preliminarily explained based on the major interactions involved in the solvation process and dielectric constant of the swelling media. It was established that... 

Alcohol-specific superabsorbing gels (superalcogels) based on non-neutralized acrylic acid (AA, 60-94 mol%) and 2-acrylamido-2-methylpropane sulfonic acid (AMPS) were prepared via solution polymerization in water. Polyethylene glycol dimethacrylate and potassium persulfate were used as crosslinker and initiator, respectively. Characterization of samples was performed using FTIR, 1H-NMR and thermomechanical analyses. Glass transition temperature and modulus of dried samples were found to be directly changed with their AA content. The gels exhibited enormous ability for absorbing and retaining a variety of mono- and poly-hydric alcohols. For example, in lieu of one gram of a typical sample... 

Homopolymer hydrogel of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) and its nanocomposite counterpart were prepared to study their swelling properties. The hydrogels showed ability to absorb and retain electrolytes as well as binary mixtures of water and organic solvents (i.e., methanol, ethanol, acetone, ethylene glycol (EG), polyethylene glycol, N-methyl-2-pyrrolidone (NMP), and dimethylsulfoxide (DMSO). The nanocomposite gel exhibited lower swelling in all solvent compositions in comparison with non-composite gel. Unlike conventional acrylic acid-based hydrogels, the poly(AMPS) gels showed superabsorbing capacity in pure ethanol, methanol, EG, DMSO and NMP. Meanwhile, swelling... 

Weak mechanical possession is one of the limiting factors in application of hydrogels. To modify this inherent disadvantage, different approaches have been studied including synthesizing interpenetrating polymer network (IPN) and nanocomposite hydrogels. So, this study has focused on preparation of a novel full-IPN structure based on anionic monomers of 2-acrylamido-2-methylpropane sulfonic acid/acrylic acid–sodium acrylate via facile solution polymerization technique in an aqueous media with incorporation of graphene oxide (GO) nanosheets. Mechanical performance of materials in the “as-prepared condition” and “swollen state” was characterized via tensile, compression, and rheology tests,... 

Weak mechanical possession is one of the limiting factors in application of hydrogels. To modify this inherent disadvantage, different approaches have been studied including synthesizing interpenetrating polymer network (IPN) and nanocomposite hydrogels. So, this study has focused on preparation of a novel full-IPN structure based on anionic monomers of 2-acrylamido-2-methylpropane sulfonic acid/acrylic acid-sodium acrylate via facile solution polymerization technique in an aqueous media with incorporation of graphene oxide (GO) nanosheets. Mechanical performance of materials in the "as-prepared condition" and "swollen state" was characterized via tensile, compression, and rheology tests,... 

Four derivatives of hyaluronic acid (HA) bearing thiol (HA-SH), hydrazide (HA-hy), 2-dithiopyridyl (HA-SSPy), and aldehyde groups (HA-al) respectively were synthesized. Thiol and 2-dithiopyridyl as well as hydrazide and aldehyde make up two chemically orthogonal pairs of chemo-selective functionalities that allow in situ formation of interpenetrating (IPN) disulfide and hydrazone networks simultaneously upon the mixing of the above derivatives at once. The formation of IPN was demonstrated by comparing it with the formulations of the same total HA concentration but lacking one of the reactive components. The hydrogel composed of all four components was characterized by a larger elastic... 

Abstract: Photocatalysis using semiconductors has emerged as a promising wastewater treatment process to overcome the major challenges faced by conventional technologies. The advantages of ZnO nanomaterials over other semiconductors, and their structure-dependent properties, make them important building blocks in nanotechnology as multifunctional materials. Moreover, it has been confirmed that ZnO nanomaterials can exhibit high performance in photodegradation of organic dyes for treatment of industrial effluent. The wurtzite structure of ZnO contains polar and nonpolar planes; the low surface energy and thermodynamic stability of the nonpolar planes enable formation of one-dimensional (1D)... 

In this research, adsorption and photocatalytic degradation process were utilized to remove organic dye from wastewater. To accomplish that, a newly-designed ternary nanostructure based on Ag nanoparticles/ZnO nanorods/three-dimensional graphene network (Ag NPs/ZnO NRs/3DG) was prepared using a combined hydrothermal-photodeposition method. The three-dimensional structure of graphene hydrogel as a support for growth of ZnO nanorods was characterized using field emission scanning electron microscopy (FESEM). In addition, diameter of silver nanoparticles grown on the ZnO nanorods with the average aspect ratio of 5 was determined in the range of 30–80 nm by using transmission electron microscopy...