Sharif Digital Repository

In this study, H4Ti5O12 nanotubes have been prepared as Li+ adsorbent by acid treatment of Li4Ti5O12 nanotubes. Li4Ti5O12 nanotubes were synthesized via a hydrothermal method in which TiO2(B) nanNotubes were used as a precursor. The prepared Li-ion sieve showed a significant high ion-exchange capacity (160.6 mgg-1) for lithium ions due to its large specific surface area of 115.4 m2 g-1 compared to the other related studies. The kinetics and isotherm investigation revealed that the pseudo-second-order equation well described the adsorption kinetics, and the Langmuir model well fitted the isotherm data. Furthermore, the low value of adsorption energy obtained from the Dubinin-Radushkevitch... 

Here, Graphene oxide/poly (acrylamide -2-acrylamide-methyl-propanesulfonic acid)/sodium alginate (GO/PA-AMPS/SA) hydrogel was synthesized through a free-radical polymerization approach. The impact of Graphene Oxide (GO) content on mechanical strength, swelling behavior, and the adsorption performance of prepared hydrogel was studied. The operating parameters, including contact time, solution pH, and initial Cu(II) content on the adsorption capacity of the hydrogel, were studied. The maximum Cu(II) adsorption capacity of 230.8 mg/g was obtained for GO/PA-AMPS/SA under a pH of 5, the contact time of 270 min, and adsorbent content of 0.5 g/L at 25 °C. The high value of adsorption capacity after... 

In this study, H4Ti5O12 nanotubes have been prepared as Li+ adsorbent by acid treatment of Li4Ti5O12 nanotubes. Li4Ti5O12 nanotubes were synthesized via a hydrothermal method in which TiO2(B) nanNotubes were used as a precursor. The prepared Li-ion sieve showed a significant high ion-exchange capacity (160.6 mgg−1) for lithium ions due to its large specific surface area of 115.4 m2 g-1 compared to the other related studies. The kinetics and isotherm investigation revealed that the pseudo-second-order equation well described the adsorption kinetics, and the Langmuir model well fitted the isotherm data. Furthermore, the low value of adsorption energy obtained from the Dubinin-Radushkevitch... 

Effect of different conditions on shear behaviour of rock has been investigated by various researchers. As known, in larger scale the continuity of the rock material is interrupted by separated planes such as bedding planes, faults, shear zones, closure and the behaviour converts to be inelastic and anisotropic. Generally, discontinuities appear repeatedly in more than one preferential direction, creating a three dimensional structure, reducing its stiffness and shear strength as mechanical effects and increasing its transport velocity associated with discontinuity flow as hydraulic effects. They also make rock behavior more complex and different compared to the behavior of soil. According... 

Side weirs are hydraulic control structures widely used in irrigation and drainage systems as well as wastewater treatment plants. These structures also serve as adjusting/diverting flow structures with a minimum head loss. In the present study, by applying experimental data of more than 400 laboratory tests and using the multivariable nonlinear partial least-squares (PLS) method, three nonlinear equations are proposed for discharge coefficient, CM, of triangular and asymmetric labyrinth side weirs. These equations relate the discharge coefficient to the relevant geometrical and hydraulic dimensionless characteristics of flow. Results indicate that the new proposed equations are more... 

This letter investigates the deterministic design of pilot power and pattern for sparse channel estimation in OFDM systems based on minimizing the coherence of the DFT sub-matrix. It has been suggested that the pilot pattern forming a cyclic difference set (CDS) or almost difference set (ADS) is optimal. So, we proposed a deterministic procedure that jointly optimized for pattern and power of pilots as a solution. First, pilot patterns forming CDS/ADS were gathered through a search. Then, the power was numerically allocated to the different pilots from all the patterns. Finally, the pilot pattern and power pair leading to minimum coherence was selected from the available pairs. Simulation... 

In this paper, the problem of finding the shortest path between two points in the presence of single-point visibility constraints is studied, In these types of constraint, there should be at least one point on the output path from which a fixed viewpoint is visible. The problem is studied in various domains, including simple polygons, polygonal domains and polyhedral surfaces. The method is based on partitioning the boundary of the visibility region of the viewpoint into a number of intervals. This is done from the combinatorial structure of the shortest paths from the source and destination to the points on the boundary. The result for the case of simple polygons is optimal with O(n) time... 

In this paper, we study the problem of finding the shortest path between two points inside a simple polygon such that there is at least one point on the path from which a query point is visible. We provide an algorithm which preprocesses the input in O (n2 + n K) time and space and provides logarithmic query time. The input polygon has n vertices and K is a parameter dependent on the input polygon which is O (n2) in the worst case but is much smaller for most polygons. The preprocessing algorithm sweeps an angular interval around every reflex vertex of the polygon to store the optimal contact points between the shortest paths and the windows separating the visibility polygons of the query...