Sharif Digital Repository

In recent years, additive manufacturing has been widely used in prototyping and production of industrial-commercial pieces. Additive manufacturing or three-dimensional (3D) printing is able to easily produce any piece for initial prototyping, no matter how complex it is. The fused deposition modeling (FDM) is a type of additive manufacturing process that produces the piece with the mechanism of feeding the PLA filament, then the molten polymer extrusion and depositing the fluid layer by layer with a high viscosity. Since the thickness of the layers is directly proportional to the diameter of the nozzle and the diameter of the used nozzles cannot be in the micron range (lower than 100... 

Nowadays, with a constant increase in life expectancy, joints pain and deficiencies have become a major problem and the use of prosthesis is increasing. One of the most important joint in human body is the hip joint which bear a major share of forces in daily activities. Hip joint is a cup-sphere joint with 3 degrees of freedom (DOF). Therefore, design and manufacturing of such prosthesis is very important. The objective of this thesis is to develop the know how for manufacturing of a standard hip prosthesis by hot forging of Ti6Al4V alloy. First a review of kinematics of bones and joints and forces on hip joint is presented, then the proper process for manufacturing of the hip prosthesis... 

Modal analysis is very important in determining the physical properties of structures and mechanisms. This field is divided into two general parts: Experimental Modal Analysis (EMA) and Operational Modal Analysis (OMA). In the operational modal analysis, there are more challenges for the analyst due to the lack of inputs to identify the system. Many of the mechanical structures can not be analyzed experimentally and under specific loadings, but should be identified under actual operating conditions and in situations where the inputs of the system are not measurable. For this purpose, a modal analysis method called "Random Sub-Space Identification" (SSI) is intoduced, which uses only output... 

All humanare subject to a physiligical phenomenon known as tremor, which introduces unintended, relatively high frequency movments into various limbs. This involuntary movment is main reason of human disability in doing of precision tasks. Precision surgery like eye surgery is among them that surgeons must have very ittle tremor to enable them to oprate on the small anatomy of the eye. In this reaearch by emphasizing on reduction of muscle fatigue in precision surgery, weight balancing mechanism designed and analyzed. Fatigue is most important cause of tremor, thus we expected tremor amplitude reduce by reduction of muscle fatigue. Purpose mechanism is passive mechanism that balances the... 

This paper presents a surface generation model for sculptured surface productions using the ball end milling process. Dimensional measurement using a coordinate measuring machine (CMM) has been commonly adapted in advanced manufacturing environment to ensure that manufacturing products have high quality and reliability. To conduct dimensional inspection efficiency in a computer integrated manufacturing (CIM) environment, there is an urgent need to derive a sampling strategy which can be used to specify a set of measuring points that lead to accurate sampling while minimizing the sampling time and cost. Owing to the variations in characteristics of geometric feature and manufacturing process,... 

Typical Numerical Control Machines, mainly are made a mechanism with axes perpendicular to each other. Because of lower weight, the parallel mechanisms are focused by CNC manufacturers. the Hexaglide mechanism is popular in parallel mechanisms used in CNC.Today, software of Solid modelling, generate G-Codes but this Codes works for conventional Numerical Control machines. for use of this G-Code for Parallel Mechanism CNC, a new controller should be designed to convert the standard G-Code motion command for Hexaglide CNC.The End of this project, is design and manufacture a controller for Hexaglide CNC that convert conventional G-Code for that and initiate drivers.Finally, the controller is... 

Selective laser sintering is a technique which uses a laser as the power source to sintering some selected points at a bed of powder in order to create a solid structure. In this research the SLS mechanisms of powder deposition is simulated and surface smoothness and layer density created by each mechanism is computed. For this purpose roller, blade and hopper mechanisms are simulated. For this simulation, polyamide 12 (PA2200) which is a common material is used. In this simulation at first powder specifications are extracted according to the references and for particle shape instead of using the spherical particle shape we use a certain shape that is more close to reality which created by... 

High-quality online services demand reliable and fast packet delivery at the network layer. However, clear evidence documents the existence of compromised routers in the ISP and enterprise networks, threatening network availability and reliability. A compromised router can stealthily drop, modify, inject, or delay packets in the forwarding path to launch Denial-of-Service, surveillance, man-in-the-middle attacks, etc. So researches tried to create intrusion detection methods to identify adversarial routers and switches. To this end, data-plane fault localization (FL) aims to identify faulty links and is an effective means of achieving high network availability. FL protocols use... 

Confining nematic liquid crystal between two curved boundary conditions while the nematic molecules have a degenerate planar anchoring leads to complex and beautiful textures of molecular disparagement(defect) in the bulk and on the surfaces. Such the liquid crystal shells are made with double-emulsion techniques in microfluidic devices have provided applications for micro-scale colloidal linkers.In this work, we have numerically minimized the elastic energy in one-constant approximation in present of Fournier’s degenerate surface potential with finite element method. The nematic shell is confined between two spherical surfaces that we have studied the final energies and their related... 

Secure routing is a major key to service maintenance in wireless ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. Wormhole attack is one of the most severe active attacks to mobile ad hoc networks. Noting the resource limitations in such networks, nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a... 

Providing high bandwidth network infrastructures for ever increasing need of data transport is of great importance. The underling infrastructure for many communication services such as GSM/3G/4G mobile networks and Internet services is Synchronous Digital Hierarchy (SDH) optical transport systems. SDH are standardized protocols that multiplex multiple lower rate digital bit streams, such as E1 and Ethernet, and transfer them synchronously over optical fiber using lasers or LEDs. In addition to high data transfer rates, flexible network management and protection mechanisms have great importance, hence are part of SDH standards. In order to obtain flexible network architecture and protected... 

Development of Smart Grid and deployment of smart meters in large scale has raised a lot of concerns regarding customers’ privacy. Consequently, several schemes have been proposed to overcome the above mentioned issue. These schemes mainly rely on data aggregation as a method of protecting users’ privacy from the grid operators. However, the main problem with most of these schemes is the fact that they require a large amount of processing power at the meter side. This, together with the fact that smart meters don’t usually have a powerful processor, can cause the unavailability of smart meter data at the required time for operators of the grid, and at the same time disables smart meters from... 

A liquid crystal is a state of matter composed of highly anisotropic building blocks. When liquid crystals are exposed to surfaces with given shapes and anchoring conditions, the orientation of their molecules gets spatially disordered and topological defects may form in the system. The interplay between liquid crystals and the geometry and topology of the colloidal particles has motivated extensive recent studies.In this thesis, we present the numerical modeling results for two faceted colloidal particles in a thermotropic nematic liquid crystal. To obtain the equilibrium nematic field with a finiteelement method, we numerically minimize the free energy of the system that based on the... 

Dynamic spectrum access with the aid of cognitive radio (CR) technology is a viable solution to spectrum scarcity. There are many military and emergency applications that require the use of cognitive radio ad-hoc networks (CRAHNs). In these net- works, nodes must first find each other in a wide spectrum and then exchange their desired data. The process of finding each other in a multichannel environment is a challenging task and is usually known as rendezvous. Since rendezvous is the first step in communication, disrupting will disable the nodes from establishing proper communication sessions. That results in a drastic degrade in the performance of the network. Therefore, it is important to... 

Spray-wall impingement is one of the phenomenon that associated in different subject such as spray cooling, combustion chamber and gas turbine. With the impingement of spray to the wall, liquid film begins to form. Wall film characteristics is still an important subject to study. Due to the various stages of liquid film formation from injection of spray till spray-wall impingement, the investigation of this phenomenon is far more complicated. This paper is meant to provide detailed data on spray-wall impingement and wall film formation physics with the help of computational analysis of OpenFOAM . A Lagrangian-Eulerian method based on discrete phase model (DPM) was employed to model... 

Fines migration due to their severe problems during oil production must be controlled. They cause the productivity decline due to their deposition near the well bore. Recently, application of nanotechnology in fine migration control has been much attended in both experimental and field case investigations. The main goal of the present study is to find out the ability and different effects of Nano particles (NPs) such as concentration, types and even the magnetic sensitivity to retain fines migration. In order for this, two groups of tests were conducted by engineered porous media. In this study, for the first time, an experimental setup was designed and constructed to investigate the control... 

Light propagation through turbid media, such as biological tissues, experience scattering due to inhomogeneous distribution of refractive indices of their microscopic structure. Scattering and diffusion of light not only limit many optical imaging techniques, but are also big challenges for telecommunication, spectroscopy, and other optical techniques. Recently many new imaging methods are developed that work in strongly scattering media such as optical coherence tomography, diffusion tomography, and laser speckle velocimetry. In this thesis, we have studied how wavefront shaping techniques can tackle the problem of scattering. By spatially shaping the wavefront of the incident beam, using...