Sharif Digital Repository

This review paper is devoted to the intensification of processes for nitrate removal. First, the developments of microfluidic sensors for nitrate detection and analysis have addressed. Second, the process variables of photocatalytic nitrate removal have been categorized according to their relationship with activity, selectivity and stability of the catalyst. The objective of this classification is to generate guidelines toward the photocatalytic process optimization. Third, because of the fact that a single method for nitrate removal faces some challenges, hybrid methods have been presented, and the best choice for nitrate removal can be referred to as photocatalytic – reverse osmosis... 

This review paper is devoted to the intensification of processes for nitrate removal. First, the developments of microfluidic sensors for nitrate detection and analysis have addressed. Second, the process variables of photocatalytic nitrate removal have been categorized according to their relationship with activity, selectivity and stability of the catalyst. The objective of this classification is to generate guidelines toward the photocatalytic process optimization. Third, because of the fact that a single method for nitrate removal faces some challenges, hybrid methods have been presented, and the best choice for nitrate removal can be referred to as photocatalytic – reverse osmosis... 

In the present paper, the seismic response of an arch dam subjected to spatial variation of ground motions along the interface with its foundations is investigated. Recorded ground accelerations at the dam foundation interface of an arch dam were used for the purpose of this investigation. Topographic amplification between various points of the interface was studied by obtaining ratios of the response spectral displacement and spectral pseudo acceleration. Time shift and amplification between stations show the nonuniform nature of ground motions for large structures like dams. Recorded ground accelerations were interpolated for different nodes of the finite element model. The seismic... 

A twodimensional model, based on conservation of mass, momentum and energy equations, is represented in this paper in which the coke combustion process, for iron ore sintering in a packed bed, is simulated numerically. The aforementioned packed bed consists of iron ore, coke, limestone and moisture. The main objective of iron ore sintering is producing resistant agglomerates which can be used in blast furnaces. For this purpose, the sinter mixture is partially melted in high temperature and finally molten is allowed to cool. The molten production and subsequently, the solidification process are totally dependent on composition and components of mixture. Changes in bed porosity, caused by... 

Lipoproteins are biochemical compounds containing both proteins and lipids. These particles carry chemicals like cholesterol and triglycerides that are not soluble in aqueous solutions. This paper presents modeling of lipoprotein system using coarse grain molecular dynamics technique and stability analysis of this system in a water solution like blood. A high density lipoprotein (HDL) that consists of two annular monomers is modeled. Also there are lipid bilayers located in center of the rings, so the whole HDL and lipid bilayers are called lipoprotein system. First, all atom model is provided and then coarse-grain model is obtained using MARTINI technique. Modeling of the system in all atom... 

A vast number of deaths in the world have been attributed to atherosclerosis. The prominent aim of this study is proposing an accurate and simple model to investigate the process of arterial wall thickening. In order to investigate LDL (Low Density Lipoprotein) accumulation in arterial wall, a four layer model for arterial wall consisting of endothelium, intima, IEL, and media is presented. All layers are treated as homogenous porous media. This model has been solved both numerically and analytically. Obtained accumulated LDL in the intima is used to calculate oxidized LDL flux. Also, the presented model and clinical data are used to prepare the growth model for arterial wall. Furthermore,... 

Many theories and mathematical simulations have been proposed concerning urine concentrating mechanism (UCM). The WKM and region approach are the two most valuable methods for compensating the effect of tubule's architecture in renal medulla. They both have tried to simulate tubule's confinement within a particular region mathematically in one spatial dimension. In this study, continuity, momentum and species transport equations along with standard expressions for transtubular solutes and water transports on tubule's membrane were solved numerically in three spatial dimensions which practically is the main significance of our novel approach. Model structure has been chosen as simple as... 

This article presents a methodological approach for controller gain tuning of wind turbines using global optimization algorithms. For this purpose, the wind turbine structural and aerodynamic modeling are first described and a complete model for a 5 MW wind turbine is developed as a case study based on a systematic modeling approach. The turbine control requirements are then described and classified using its power curve to generate an appropriate control structure for satisfying all turbine control modes simultaneously. Next, the controller gain tuning procedure is formulated as an engineering optimization problem where the command tracking error and minimum response time are defined as... 

The Fontan surgery is performed on patients with a single ventricle heart defect to prevent the combination of highlyoxygenated and poorly-oxygenated blood. Blood flow in total cavopulmonary connection (TCPC) which culminates an ordinary Fontan operation is practically steady-state but this flow is not appropriate for respiratory systems. This article investigates an approach in Fontan surgery that has been recently proposed in order to make the pulmonary blood flow pulsating. Moreover, for investigating the compliance of vessels and its effects on blood flow in TCPC, we have used the FSI (Fluid Structure Interaction) method as well as rigid wall assumption for comparison purposes. Our TCPC... 

The photocatalytic degradation of p-nitrophenol (PNP) using TiO2 particles immobilized on a fiberglass cloth was investigated in a novel design of a photo-impinging stream reactor. A spray painted method has been used for the coating process. The structural properties of the immobilized sample were examined using X-ray diffraction and a scanning electron microscope (SEM). The photocatalytic degradation results showed the good performance of the reactor. The flow regime within the reactor was characterized and modeled by applying a liquid residence time distribution. A compartment model consisting of four continuous stirred regions was assigned to describe the flow pattern in the reactor. A... 

The urine formation and excretion system have long been of interest for mathematicians and physiologists to elucidate the obscurities within the process happens in renal tissue. In this study, a novel three-dimensional approach is utilized for modeling the urine concentrating mechanism in rat renal outer medulla which is essentially focused on demonstrating the significance of tubule's architecture revealed in anatomic studies and physiological literature. Since nephrons and vasculatures work interdependently through a highly structured arrangement in outer medulla which is dominated by vascular bundles, a detailed functional unit is proposed based on this specific configuration.... 

This work describes a very simple, novel and selective spectrophotmetric method for simultaneous determination of sulfamethoxazole and trimethoprim in pharmaceutical preparation and synthetics samples using direct orthogonal signal correction-partial least squares (DOSC-PLS). The all factors affecting on the sensitivity were optimized and the linear dynamic range for determining of these drugs was found. The PLS modeling was used for the multivariate calibration of the spectrophotometric data and DOSC was used for preprocessing of data matrices and the prediction results of model. The experimental calibration matrix was designed by measuring the absorbance over the range 200-400 nm for 32... 

The synthesis of pure α-Fe2O3 nanoparticles (30 nm) using a superabsorbent nanopolymer (SANP) by the thermal decomposition is reported. Synthesized α-Fe2O3 nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electronic microscopy (TEM) and thermogravimetric analysis (TG) techniques. The applicability of this nanostructure material was assessed by its catalytic effect on the Friedel-Crafts acylation. ©2009 Sociedade Brasileira de Química  

Ni/SiC nanocomposite coatings were electrodeposited using Watts type bath and different SiC particle size. The electrodeposition behavior of Ni/SiC nanoelectrocomposites was studied using electrochemical techniques such as impedance spectroscopy (EIS) and voltammetry. In this study it was shown that SiC particles modify the EIS diagram and voltammograms as well as surface morphology of electrodeposited layers. Experimental results showed that SiC particles not only affect the formation of intermediate species and decrease charge transfer resistance but also increase the nucleation sites for nickel electrodeposition and thus affect the microstructure of electrodeposited Ni/SiC nanocomposites.... 

Potent carbon-neutral energy carriers bring a vital solution for sustained industrialization and environmental protection. Hydrogen as a novel zero-emission energy carrier offers more than twice energy per unit mass compared to other fuels. Membrane reactor technology transforms gray hydrogen to blue by selective hydrogen separation and carbon dioxide capture from the product mixture. Moreover, improved reactant conversion during reversible steam reforming of methane, methanol, and ethanol; water gas-shift; and dehydrogenation of cyclic and aliphatic hydrocarbons as well as enhanced hydrogen yield are results of selective and distributed hydrogen separation from membrane reactor. In this...