Loading...
Search for: yarmohammadi--parisa
0.079 seconds

    Measure the Project Progress with Standard Weight Factors and Calculate the Project Performance

    , M.Sc. Thesis Sharif University of Technology Yarmohammadi, Ali (Author) ; Shadrokh, Shahram (Supervisor)
    Abstract
    One of the methods that we used today to manage project are calculating project progress. By which we can calculate the actual progress of project by comparison the actual plan with the schedule plan. If the actual progress,measured with less error, then the control of project done with high accuracy.Project progress are calculated in control account. For this reason, if the number of control account increased, the accuracy of the calculation increased and on the other hand whatever this control account increase the amount of time used to collect information also increases. In this study, we are looking to create mathematical model that in addition increases the accuracy of measurement,also... 

    Well-posedness of Two Mathematical Models for Alzheimer's Disease

    , M.Sc. Thesis Sharif University of Technology Yarmohammadi, Parisa (Author) ; Hesaaraki, Mahmoud (Supervisor)
    Abstract
    In season 1, we introduce a mathematical model of the in vivo progression of Alzheimer’s disease with focus on the role of prions in memory impairment. Our model consists of differential equations that describe the dynamic formation of Aβ -amyloid plaques based on the concentrations of Aβ oligomers, PrPC proteins, and the Aβ-×-PrPC complex, which are hypothesized to be responsible for synaptic tox- icity. We prove the well posedness of the model and provided stability results for its unique equilibrium, when the polymerization rate of β-amyloid is constant and also when it is described by a power law. In seson 2, We consider the existence and uniqueness of solutions of an initial-boundary... 

    Modal Logic for Games

    , M.Sc. Thesis Sharif University of Technology Yarmohammadi, Amir Reza (Author) ; Ardeshir, Mohammad (Supervisor)
    Abstract
    Game theory is a branch of mathematics that has a history of logical modeling. So far, various models have been presented for games in extensive and normal forms, games with complete and incomplete information, and games with perfect and imperfect information. In game modeling, pure strategies are often formulated; only in a few articles have mixed strategies been modeled. In this thesis, after a brief review of the definitions, terms, and fundamentals of game theory in Chapter Two, we will analyze one of the most important articles on modeling mixed strategies in Chapter Three. Then, in Chapter Four, we introduce epistemic modeling of games, which, within the framework of epistemic logic,... 

    Erratum: Real-space exciton distribution in strained-siligraphene g-SiC7 (Journal of Applied Physics (2019) 126:6 (063104) DOI: 10.1063/1.5108557)

    , Article Journal of Applied Physics ; Volume 126, Issue 16 , 2019 ; 00218979 (ISSN) Le, P. T. T ; Ebrahimi, M. R ; Davoudiniya, M ; Yarmohammadi, M ; Sharif University of Technology
    American Institute of Physics Inc  2019
    Abstract
    There are inadvertent errors in the y axis label of Figs. 2(b) and 6 as well as in the first paragraph of Sec. IV B. The y axis labels typed are ϵg (electron volts) and ϵ b (electron volts) in Figs. 2(b) and 6, respectively, instead of ϵg - ϵF (electron volts) and ϵb - ϵF (electron volts). Also, the term ω ≈ [ϵg - ϵF] in the first paragraph of Sec. IV B should be ω ≈ [ϵg - ϵb]. These errors do not alter other results, discussion, and conclusion of the manuscript. © 2019 Published under license by AIP Publishing  

    Real-space exciton distribution in strained-siligraphene g-SiC7

    , Article Journal of Applied Physics ; Volume 126, Issue 6 , 2019 ; 00218979 (ISSN) Le, P. T. T ; Ebrahimi, M. R ; Davoudiniya, M ; Yarmohammadi, M ; Sharif University of Technology
    American Institute of Physics Inc  2019
    Abstract
    Siligraphene belonging to the family of two-dimensional (2D) materials has great potential in optoelectronics due to its considerable excitonic effects. In this study, the strain effects on the electronic structure and the real-space exciton wave functions of g - SiC 7 are investigated using the first-principles calculations based on the ab initio many-body perturbation theory. Alongside the increase (decrease) of the bandgap with compressive (tensile) strain, our results show that the exciton in the siligraphene monolayer under in-plane biaxial compressive strains is much more localized than that in the case of tensile one, leading to the higher and lower exciton binding energies,... 

    Experimental Study of Drying and Calcination of Simulated High-Level Waste (HLW)

    , M.Sc. Thesis Sharif University of Technology Farahzadi, Zahra (Author) ; Samadfam, Mohammad (Supervisor) ; Zahakifar, Fazel (Supervisor) ; Zaheri, Parisa (Co-Supervisor)
    Abstract
    One of the novel methods of stabilization of nuclear waste is the use of vitrification technology. In order to stabilize high level wastes (HLLW) in glass, it is required that the elements are in their oxide form. Therefore, it is necessary to evaporate the waste and turn it into a solid form so that the elements can be converted into oxide form in the calcination furnace. Hence, one of the challenges of stabilization is the optimization of evaporation and calcination conditions. In this research, the parameters affecting evaporation were first investigated. Using laboratory measurements of application: temperature (110 to 180 °C), presence of nitric acid (0.5 to 4 mol/L), ratio of zirconium... 

    The Study of Effective Parameters on Thorium Extraction by Cyanex 272 in an Emulsion Liquid Membrane System

    , M.Sc. Thesis Sharif University of Technology Ehyaie, Darya (Author) ; Samadfam, Mohammad (Supervisor) ; Zaheri, Parisa (Supervisor) ; Zahakifar, Fazel (Co-Supervisor)
    Abstract
    This study used the emulsion liquid membrane method to investigate the extraction and separation of thorium from nitrate solution. According to the results obtained from the studies, Cyanex 272 was a suitable option for selectively extracting thorium. For simultaneous extraction and stripping of thorium from dilute aqueous solutions, an emulsion liquid membrane system consisting of Cyanex 272 as an extractant, Span 80 as a surfactant and sulfuric acid solution as a receiving phase (internal phase) was used. Emulsion liquid membrane method has high mass transfer flux due to high surface to volume ratio, which causes high extraction efficiency and fast transfer of thorium ions from its low... 

    Fabrication Patient-Specific Drill Guide Templates for Cervical Pedicle Screw Placement

    , M.Sc. Thesis Sharif University of Technology Safahieh, Amir Hossein (Author) ; Arjmand, Navid (Supervisor) ; Parnianpour, Mohammad (Supervisor) ; Azimi, Parisa (Co-Supervisor)
    Abstract
    One of the most common spinal surgeries involves spinal fusion or vertebral fixation, which is used to treat various conditions such as intervertebral disc disease, scoliosis (lateral deviation of the spinal column), fractures, infections, or the presence of tumors in the spinal column. In this surgical procedure, the use of pedicle screws and titanium rods prevents motion and friction between two vertebrae. Screws may enter the vertebrae in the wrong position and angle, causing bone weakening, rupture of nerve roots or blood vessels, weakness or lack of sensation in some parts of the body, spinal cord injury, and in severe cases, paralysis of the patient. For this reason, fusion surgery is... 

    Theoretical Investigation of Coupled Microbial Electrochemical Cells in Micro-Sized Systems and Assessment of Biohydrogen Generation

    , M.Sc. Thesis Sharif University of Technology Arab Yarmohammadi, Fatemeh (Author) ; Yaghmaei, Soheila (Supervisor) ; Mardanpour, Mohammad Mahdi (Co-Supervisor)
    Abstract
    Due to the importance of hydrogen production for its applications in therapy, this research reports the fabrication of a coupled microfluidic microbial electrochemical cell, including microfluidic microbial fuel cells (MFCs) and a microfluidic microbial electrolysis cell (MEC) series in order to perform it as a selfpowered bioenergy generator to produce biohydrogen with no need for an external power source. The designed went goes through a validation process that relied on experimental results of a coupled system in glucose degradation. By determining the governing equations of the system and simulating its behavior in various conditions, the effect of operational factors on the system... 

    Hydrodynamic Simulation of Flow in Reverse Osmosis Membranes for Seawater Disalination

    , M.Sc. Thesis Sharif University of Technology Yarmohammadi, Amir Mohmamad (Author) ; Seif, Mohamad Saeed (Supervisor) ; Mehdigholi, Hamid (Supervisor)
    Abstract
    Water is the most essential human need and the lack of fresh water soon is one of the biggest problems of mankind. One way to deal with the lack of fresh water is desalination of seawater. Seawater desalination is done by different thermal and membrane methods. In this research, the methods and history of freshwater supply methods and the role of chains in the progress of seawater desalination, and the measures taken in the field of seawater desalination have been investigated. Among the various methods discussed and proposed in this research, it was concluded that reverse osmosis membrane is available and has an acceptable economic efficiency compared to other methods. After choosing the... 

    Investigation of Mass Transfer Coefficients in Lithium Liquid-Liquid Extraction Process in Batch and Continuous Modes (Microchannel)

    , M.Sc. Thesis Sharif University of Technology Bahadri, Mohammad Mehdi (Author) ; Otokesh, Mohammad (Supervisor) ; Amari Allahyari, Sareh (Supervisor) ; Zaheri, Parisa (Co-Supervisor)
    Abstract
    Lithium is a soft, silvery-white alkali metal that is recognized as the lightest metal and the least dense solid element. The increasing demand for lithium, driven by the global shift towards electrification and sustainable energy solutions, has transformed this material into a crucial resource in the modern economy. Lithium has applications in various industries, including the nuclear industry. 6Li is used for the production of tritium, and 7Li, in the form of 7LiOH, is used to adjust the pH in light water reactors and as an anti-corrosion compound in fission reactors. In this study, the extraction of lithium from the aqueous phase using a Y-shaped microchannel was carried out, and the mass...