Sharif Digital Repository

For the present article, a pulsating heat pipe (PHP) is fabricated and tested experimentally by bending a copper tube. The effects of working fluid, heat input, charging ratio, inclination angle, magnets location, and ferrofluid (magnetic nanofluid) volumetric concentration have been investigated on the thermal performance of this PHP. Experimental results show that using ferrofluid as a working fluid improves the thermal performance of the PHP significantly. Moreover, applying a magnetic field on a ferrofluidic PHP reduces its thermal resistance. By changing the inclination angle of the PHP from vertical mode to angles close to the horizontal mode, the present PHP has a constant and... 

In this article, the control of an electrohydrodynamic 3D printer is studied. The proposed controller has a hybrid piecewise linear feedback form which is designed based on a hybrid model of the printer. The hybrid model is obtained via a gray box identification process whose structure is proposed utilizing the results of the finite element simulation of the printer within the COMSOL Multiphysics software. The asymptotic stability of the hybrid control combined with a hybrid observer is proven using the Lyapunov theory. In addition, the obtained control is applied to the finite element model of the printer to check its performance which shows the success of the controlled system in tracking... 

Chatter is a limiting factor in machining systems with adverse effects for workpiece surface, tool and machine life and material removal rate. Proper modelling of this phenomenon requires that the dynamic characteristics of the machining system is known. It is common to obtain the dynamic of the system by modal tests in stationary condition. However, the vibration characteristics of a machine change between its operating and resting mode. The goal of this work is to study vibrations in boring using the vibrational characteristic in operational conditions using the operating deflection shape method. In this paper, vibration characteristics of the in the boring bar is obtained by both modal... 

A novel voltammetric biosensor based on nano-TiO2/nafion/carbon nanoparticles modified glassy carbon electrode (TiO2/N/CNP/GCE) was developed for the determination of dobutamine (DBA). Characterization of the surface morphology and property of TiO2/N/CNP layer was carried out by the scanning electron microscopy and atomic force microscopy. The electrochemical performance of the modified electrode was investigated by means of the cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy techniques. Effective experimental variables, such as the scan rate, pH of the supporting electrolyte, drop size of the casted modifier suspension and accumulation... 

The performance of an HTPB/N2O hybrid motor was experimentally investigated. A hybrid motor was designed and manufactured in a laboratory with the purpose of studying the effects of various parameters on the motor's performance, including fuel regression rate and specific impulse. A series of tests were conducted to find a correlation between the fuel regression rate and the oxidizer's mass flux. The effects of chamber's pressure on the regression rate as well as other performance parameters were investigated. While the burning rate did not change dramatically, both the efficiency and ISP of the motor increased. The local fuel regression rate and the fuel port were also calculated. In... 

The aim of this study was to investigate the applicability of acoustic emission (AE) technique to evaluate delamination crack in glass/epoxy composite laminates under quasi-static and fatigue loading. To this aim, double cantilever beam specimens were subjected to mode I quasi-static and fatigue loading conditions and the generated AE signals were recorded during the tests. By analyzing the mechanical and AE results, an analytical correlation between the AE energy with the released strain energy and the crack growth was established. It was found that there is a 3rd degree polynomial correlation between the crack growth and the cumulative AE energy. Using this correlation the delamination... 

A stable composite film of silver nanoparticles (Ag NPs) decorated on reduced graphene oxide is prepared by a two-step simple procedure. The surface morphology of the modified electrode is characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. The electrochemical behavior of tinidazole (TNZ) on the surface of the modified electrode is investigated by linear sweep voltammetry and electrochemical impedance spectroscopy. The prepared composite electrode acts as a highly sensitive platform for the voltammetric determination of TNZ, leading to a significant increase in the reduction peak current of TNZ. The effects of experimental parameters such as the... 

Immiscible gas injection is one of the most common enhanced oil recovery methods used under various reservoir conditions. In this work, the immiscible recycle gas injection, as an EOR scenario for improving recovery efficiency in one of the south-west Iranian oil reservoirs, is simulated by a commercial simulator, ECLIPSE. The reservoir fluid is light oil, with an API of 43. The oil bearing formations are carbonate, and so a dual porosity/dual permeability behavior was chosen for better representation of the fracture system. Different sensitivity analyses with respect to several parameters like the number and location of injection/production wells, production/injection rate, completion... 

Pentamode metamaterials are a type of extremal designer metamaterials, which are able to demonstrate extremely high rigidity in one direction and extremely high compliance in other directions. Pentamodes can, therefore, be considered as building blocks of exotic materials with any arbitrarily selected thermodynamically admissible elasticity tensor. The pentamode lattices can then be envisioned to be combined to construct intermediate extremal materials, such as quadramodes, trimodes, and bimodes. In this study, we constructed several primary types of anisotropic pentamode lattices (with midpoint positioning of 10%, 15%, 20%, 25%, 30%, 35%, and 42% of the main unit cell diagonal) and then... 

A new strategy for enhancing the efficiency and reducing the production cost of TiO 2 solar cells by design of a new formulated TiO 2 paste with tailored crystal structure and morphology is reported. The conventional three- or four-fold layer deposition process was eliminated and replaced by a single layer deposition of TiO 2 compound. Different TiO 2 pastes with various crystal structures, morphologies and crystallite sizes were prepared by an aqueous particulate sol-gel process. Based on simultaneous differential thermal (SDT) analysis the minimum annealing temperature to obtain organic-free TiO 2 paste was determined at 400°C, being one of the lowest crystallization temperatures of TiO 2... 

Herein, we demonstrate a facile low temperature chemical bath deposition approach to deposit a light scattering layer on a nanostructured mesoporous TiO2 bottom layer in a dye-sensitized solar cell architecture. Large TiO2 nanoparticles were formed on the top surface of photoanode electrodes via hydrolysis of TiCl4 at 70 °C. We controlled the size and agglomeration of these TiO2 nanoparticles by altering the concentration of TiCl4 in the chemical bath during the hydrolysis process. Electron microscope images revealed that mono-dispersed scattering particles having uneven surfaces with diameters between 100 to 300 nm formed on the mesoporous titania layer. The scattering behavior of the... 

In this correspondence, we focus on the performance analysis of the widely-used minimum description length (MDL) source enumeration technique in array processing. Unfortunately, available theoretical analysis exhibit deviation from the simulation results. We present an accurate and insightful performance analysis for the probability of missed detection.We also show that the statistical performance of the MDL is approximately the same under both deterministic and stochastic signal models. Simulation results show the superiority of the proposed analysis over available results  

Most of the heavy oil reservoirs contain discontinuous shale which affects fluid flow through porous media as well as recovery efficiency during enhanced oil recovery processes. However, the role of shale geometrical characteristics (including orientation, length, discontinuity, and spacing of the shale) on oil recovery remains a topic of debate in the literature, especially during miscible injection of heavy oils and five-spot systems. Here, a series of hydrocarbon solvent injection tests have been performed on various five-spot glass micromodels containing barriers which are initially saturated with heavy oil under fixed flow rate conditions. Oil recoveries as a function of pore volumes of... 

Alumina-silicate composite coatings were formed on titanium substrate by plasma electrolytic oxidation (PEO) process using a silicate-based electrolyte containing alumina nanoparticles. Microstructure, chemical and phase compositions, and thickness of the coatings were investigated to determine, coating mechanism and probable reactions during the process. The effect of processing time on corrosion resistance of the coatings was investigated using the potentiodynamic polarization test. Barrier layer (TiO2) formation, micro arcs occurrence, and electrolyte ionization were the main stages of PEO coating growth process. Alumina nanoparticles were incorporated into the coating by cataphoretic and... 

Plasma electrolytic oxidation (PEO) process was employed to create ceramic coatings on titanium substrate by using silicate-based electrolytes containing different concentrations of alumina nanoparticles (0, 3, 6, and 10. g/lit). The effect of alumina nanoparticles concentration on the morphology, chemical and phase composition of the PEO coatings was investigated by scanning electron microscope, energy dispersive spectrometer, and X-ray diffractometer, respectively.The corrosion behavior of samples was studied by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) tests. SEM, EDS, and XRD analyses illustrated that alumina nanoparticles incorporated into the... 

Electrohydrodynamic (EHD) printing is a novel technology used for fabricating high-resolution part features from a wide range of materials. Due to the multiphysics dynamics and the multiphase nature of the microdroplet formation in the EHD printers, modeling of this phenomenon is complicated. In this paper, the formation of a droplet in an EHD printer—under a pulsed electrical field—is simulated using a new numerical model which couples the fluid flow, the electric field distribution and the movement of the electric charges under dynamic and transient conditions. The level-set method is applied to the entire multiphysics domain in order to study the formation of the droplet. The presented... 

The electrohydrodynamic (EHD) 3D printing technology is an Additive Manufacturing (AM) method that can be used in the manufacture of submicron-size structures. In this process, which is based on the formation of Taylor jet from a metallic ink, the investigation of particles reaction and aggregate formation in ink during printing is of great importance. In this paper, a new Finite Element model based on particle tracing in fluids is presented that couples the different physics that govern an EHD phenomenon. Vortex flow caused by boundary shear stress was observed in the ink jet; which was more like the Marangoni phenomenon in a stationary drop. By experimentally validating the presented model... 

Improvement of the photoconversion efficiency and operational stability under environmental conditions is a principal challenge confronted to move forward toward commercialization of dye-sensitized solar cell (DSSC) devices the world over. Herein, enhancement of sunlight harvesting by increasing light scattering via embedding mesoporous TiO2 beads in a photoanode matrix and delaying electrolyte leakage using gel polymer electrolyte, regarded as two approaches to address this challenge, respectively. Photoanodes with various thicknesses and architectures of mesoporous TiO2 beads and nanoparticles are employed in the assembly of DSSC devices in the presence of gel polymer electrolyte. Optical... 

Developing antibacterial biodegradable Mg alloys is of paramount importance to prevent infection and inflammation during the healing process. In this regard, the Mg-2Ag alloy is proposed as a suitable candidate with appropriate biocompatibility as well as antibacterial activity. However, its rapid degradation rate limits its clinical application. To tackle this problem, the hydrothermal coating technique was employed to synthesize a barrier coating to enhance the degradability of the Mg-2Ag alloy using distilled water as the reagent. Field emission scanning electron microscopy (FESEM) micrographs and X-ray diffraction (XRD) patterns showed that a hydroxide coating was formed on the studied... 

In the regulated switching power supplies, the output voltage is usually sampled across a resistive voltage divider. In high voltage applications, the resistance of the voltage divider is very high in order to reduce its power loss. Therefore, these resistors are very good receivers of environment noise. This paper introduces a new control method for a high power, high voltage Flyback converter insensitive to the noise caused by ringing due to the leakage reactance of a high voltage Flyback converter. In this method, output voltage is sampled in an intentionally extended cycle to be sure that all the oscillations are damped. Therefore there is no need to additional damping circuits and...