Sharif Digital Repository

In this paper, we report on a periodic metallo-dielectric structure that supports geometry-induced surface plasmons in the sub-terahertz regime. The proposed structure is made up of a dielectric-coated metallic grating sandwiched by parallel metal plates. Based on the modal analysis of 2D and 3D structures, the impact of a metal cladding and a customized dielectric coating on the dispersion relation and field distribution of the guided surface wave is investigated. It is found that modal field confinement is improved in the presence of a metal cladding without narrowing the operational bandwidth of the waveguide. Moreover, a customized subwavelength-sized dielectric coating based on... 

In this paper, we present a Gaussian to tophat beam shaper (GTBS) based on an all-dielectric metasurface lens for sub terahertz (sub-THz) applications. In order to calculate the required phase profile of the GTBS, we use an analytical procedure based on the geometrical transformation technique. The calculated phase profile is then realized by a silicon (Si) metasurface lens consisting of rectangular-shaped pillars of subwavelength dimensions. Because of large solution domain relative to the operation wavelength, we combined the beam envelope and the finite element methods to simulate the structure with a high precision. By designing an anti-reflection metasurface made up of periodically... 

In this paper, we report on the design, simulation and measurement of a flat-top beam shaper (FBS) lens for a millimeter-wave (mm-wave) antenna coupled source. The beam shaper is designed to transform the pseudo-Gaussian beam of the mm-wave source into a flat-top beam of sharp roll-off at a specific distance in the Fresnel region. Firstly, relying on the geometrical optics principles, we propose an analytical formulation for the design of lens profiles. Next, a simple optimization method based on the full-wave simulation of the lens and the mm-wave antenna is suggested to tune the analytically extracted lens profile. The optimized lens profile is then studied to assess its performance... 

In this paper, we report on a periodic metallo-dielectric structure that supports geometry-induced surface plasmons in the sub-terahertz regime. The proposed structure is made up of a dielectric-coated metallic grating sandwiched by parallel metal plates. Based on the modal analysis of 2D and 3D structures, the impact of a metal cladding and a customized dielectric coating on the dispersion relation and field distribution of the guided surface wave is investigated. It is found that modal field confinement is improved in the presence of a metal cladding without narrowing the operational bandwidth of the waveguide. Moreover, a customized subwavelength-sized dielectric coating based on... 

In this paper, we report on the design, simulation and measurement of a flat-top beam shaper (FBS) lens for a millimeter-wave (mm-wave) antenna coupled source. The beam shaper is designed to transform the pseudo-Gaussian beam of the mm-wave source into a flat-top beam of sharp roll-off at a specific distance in the Fresnel region. Firstly, relying on the geometrical optics principles, we propose an analytical formulation for the design of lens profiles. Next, a simple optimization method based on the full-wave simulation of the lens and the mm-wave antenna is suggested to tune the analytically extracted lens profile. The optimized lens profile is then studied to assess its performance... 

Dielectric gratings (DGs) have recently been introduced as a new platform for guiding dielectric-based geometrically-induced surface plasmons (SPs) called spoof SPs (SSPs). In this paper, we report on the modal analysis of a metal-clad DG waveguide and compare its performance with other counterparts including the dielectric image guide (IG) and the metal grating (MG) waveguide. The proposed DG waveguide is made up of a periodic array of high-resistivity silicon (HR-Si) pillars on a metal plate with a metal cladding at a proper distance above the structure. By modal analysis of 2D and 3D structures, we show that the presence of the metal cladding enhances the modal field confinement without... 

Dielectric grating-based spoof surface plasmonic (SSP) structures are among the recent low-loss and subwavelength field-concentrating solutions for realizing high-density terahertz (THz) and sub-THz integrated circuits. In this paper, we report on a novel waveguide structure capable of supporting highly confined SSP mode while exhibiting much lower propagation loss compared to other similar SSP structures. The proposed structure is composed of two perfectly aligned identical silica ridges placed on the inner faces of the metallic plates of a parallel plate waveguide with a proper plate distancing in order to leave an empty gap region between the ridges. Each of the ridges embodies a periodic... 

In this paper, we discuss some recent results on graphs attached to rings. In particular, we deal with comaximal graphs, unit graphs, and total graphs. We then define the notion of cototal graph and, using this graph, we characterize the rings which are additively generated by their zero divisors. Finally, we glance at graphs attached to other algebraic structures  

The energy of a graph G, denoted by E(G), is defined as the sum of absolute values of all eigenvalues of G. In (MATCH Commun. Math. Comput. Chem. 83 (2020) 631{633) it was conjectured that for every graph G with maximum degree Δ(G) and minimum degree Δ (G) whose adjacency matrix is non-singular, E(G) +δ (G) + Δ (G) and the equality holds if and only if G is a complete graph. Here, we prove the validity of this conjecture for planar graphs, triangle-free graphs and quadrangle-free graphs. © 2021 University of Kragujevac, Faculty of Science. All rights reserved  

The energy of a graph G, denoted by E(G), is defined as the sum of absolute values of all eigenvalues of G. In (MATCH Commun. Math. Comput. Chem. 83 (2020) 631{633) it was conjectured that for every graph G with maximum degree Δ(G) and minimum degree Δ (G) whose adjacency matrix is non-singular, E(G) +δ (G) + Δ (G) and the equality holds if and only if G is a complete graph. Here, we prove the validity of this conjecture for planar graphs, triangle-free graphs and quadrangle-free graphs. © 2021 University of Kragujevac, Faculty of Science. All rights reserved  

Background: Warts are the most common clinical manifestation of the human papilloma-virus infection in the skin and mucous membranes. In spite of the various therapeutic modalities for nongenital skin warts, there is still no single method to be used as an approved treatment. In this study, we compared the efficacy of immunotherapy and cryotherapy on wart lesions. Methods: Sixty patients with verruca vulgaris and plantar warts were randomly divided into two groups. One group received intralesional injection of candida antigen repeated every 3 weeks until complete improvement of all warts or for a maximum of three sessions. The second group was treated by cryotherapy with liquid nitrogen for... 

Local educational institutions produce in-house English for Specific Purpose (ESP) materials according to the curriculum policies designated and developed by the Ministry of Higher Education In Iran. To this end, this book aims to be used in the Iranian setting at the tertiary level for undergraduate students majoring in Mechanical Engineering. Moreover, the style of English usage in this ESP textbook is American.
Regarding the content of the textbook, it has both thematic organizations in which the topics are relevant and includes sufficient treatment of the target language areas necessary for the students. The principle organizing approach of this textbook is theme-based. In addition,... 

The aim of this study is to employ feedback control loops to provide a stable forward dynamics simulation of human movement under repeated position constraint conditions in the environment, particularly during stair climbing. A ten-degrees-of-freedom skeletal model containing 18 Hill-type musculotendon actuators per leg was employed to simulate the model in the sagittal plane. The postural tracking and obstacle avoidance were provided by the proportional—integral—derivative controller according to the modulation of the time rate change of the joint kinematics. The stability of the model was maintained by controlling the velocity of the body's centre of mass according to the desired centre of... 

A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition  

Free Content Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions  

7H-benzimidazo[2,1-a]benz[de]isoquinolin-7-one compounds were prepared in a selective manner by reaction between o-phenylenediamines and appropriate 1,8-naphthalenedicarboxylic anhydrides using acidic alumina under microwave irradiation