Sharif Digital Repository

In this research, nickel thin films have been deposited on Si (1 0 0) substrate using the dc sputtering method. Then, the deposited layers were annealed in different temperatures to oxidize and crystallize the as prepared layers. Scanning electron microscopy (SEM) analysis indicated that the nanorod shape of the nickel oxides has grown on the substrate and x-ray photoelectron spectroscopy determined the formation of stoichiometric NiO on the surface. Field emission (FE) measurements of the NiO nanorods exhibited the lowest turn-on electric field at about 3.8 V μm-1 in the 300 μm vacuum gap. Moreover, the field enhancement factor (β) was measured of about 4109 for this sample. The FE... 

Problems regarding simulation of field emitter array (FEA) electron guns are discussed. A simple method is proposed to significantly reduce computational requirements such as computation power, system memory, and time of FEA electron gun simulation and modeling. The method can be applied to any numerical solver regardless of its meshing technique. In order to extract field emission parameter from any experimental cathode I-V curve, a partly numerical algorithm, which uses the presented truncation method at the heart of its solver, is proposed. The proposed method and algorithm are applied to a number of examples, including a double-gated FEA problem, and its effectiveness in terms of error... 

Na0.3WO3 1D nanostructure forms (nanorods and nanobelts) were grown by a solid-liquid-solid mechanism from a 40 nm sputtered tungsten film deposited on a soda-lime substrate and annealed at 700 °C in a tubular furnace in N2 ambient. The morphology, structure, composition and chemical state of the prepared nanostructures were characterized by SEM, XRD, TEM, SAED and XPS measurements. The Na0.3WO3 1D nanostructures were found to have a cubic crystalline structure and grown along the [0 0 1] direction. The nanorods are a few micrometres in length and about 50 nm in diameter. The field-emission application of the prepared samples at different distances between the cathode and the anode was... 

The Co nanowire arrays were synthesized by electrodeposition in polycarbonate template (PC) with 4 μm thickness. Electron field emission properties of cobalt nanowires were studied for wires with different aspect ratios, R ranged between 10 and 60, while the diameter of wires was fixed about 50 nm. The field emission properties of the samples showed low turn on electric field (Eto) with values varying between 2.9 and 11.3 V/μm showing a minimum value for R = 20 (Eto < 3 V/μm). On the other hand, the enhancement factor shows a peak for nanowires length about 1 μm. Field emission data using the Fowler-Nordhiem theory showed nearly straight-line nature confirming cold field emission of... 

The current paper reports the deposition of sulfur micro-particles using sulfur vapor deposition (SVD). Sulfur particles in size of 5 to 45 μm were deposited on a stainless steel substrate to be used as the cathode with porous structure in lithium sulfur (Li-S) batteries. Mass loading of about 0.5 mg cm-2 was obtained from this pure sulfur cathode. The structure of this binder-free cathode was characterized by field emission scanning electron microscopy (FESEM), x-ray spectroscopy (EDS), and x-ray diffraction (XRD). The electrochemical performance of the battery with two different organic liquid ether- and carbonate-based electrolytes was investigated and the results demonstrated that the... 

A series of reduced graphene oxide/ZnxCd1-xS (RGO/ZnxCd1-xS) nanocomposites (0 < x < 1) with different ratios of Zn/Cd were synthesized via a facile hydrothermal route under optimized experimental conditions and were carefully characterized by various techniques. Because very little is known about the morphology, specific surface area, and crystal phase effects of RGO/ZnxCd1-xS crystals on their photoresponsivity, field-emission scanning electron microscopy (FE-SEM), BET surface area analysis and X-ray diffraction (XRD) data were studied to investigate their effects on photoactivity. Based on the results, a crystal phase transition from a cubic phase in RGO/Zn0.9Cd0.1S to a hexagonal... 

A low cytotoxic metal–organic framework (MOF) UiO-66 (UiO stands for University of Oslo) and NH2-UiO-66, that showed high cell viability of HFF-2 via 3-(4, 5-dimethylthiazol-2-yl) 2, 5-diphenyl tetrazolium assay, was reported as an effective adsorbent (antidotal) agents. The structure of MOFs was confirmed by Fourier transform infrared, Field emission scanning electron microscopy (FESEM) and X-ray diffraction. Thermal behavior of MOFs was investigated using with thermogravimetric analyzer in nitrogen atmosphere to check the thermal stability. FESEM showed NH2-UiO-66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size... 

Fabrication of well-defined gold nanowires (GNWs) is of significant importance in many fields such as sensing applications. In this study, the electrodeposition of well-defined GNWs inside polycarbonate (PC) template has been discussed in detail. GNWs were potentiostatically electrodeposited at different filling rates. The growth of GNWs at different stages of pore filling was monitored by electrochemical measurements and field-emission scanning electron microscopy (FE-SEM). It was confirmed that under growth rates between 2.5 and 4 nm/s, GNWs with smooth ends grew uniformly inside the template without any imperfections or corrugations. The length of GNWs was electrochemically controlled to... 

A low cytotoxic metal–organic framework (MOF) UiO-66 (UiO stands for University of Oslo) and NH2-UiO-66, that showed high cell viability of HFF-2 via 3-(4, 5-dimethylthiazol-2-yl) 2, 5-diphenyl tetrazolium assay, was reported as an effective adsorbent (antidotal) agents. The structure of MOFs was confirmed by Fourier transform infrared, Field emission scanning electron microscopy (FESEM) and X-ray diffraction. Thermal behavior of MOFs was investigated using with thermogravimetric analyzer in nitrogen atmosphere to check the thermal stability. FESEM showed NH2-UiO-66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size... 

Gold nanoparticles (AuNPs) of less than 50 nm diameter were electrodeposited from cyanide solution by pulsating electric current on modified copper and indium tin oxide (ITO) films coated on glass. Morphology, size, and composition of the deposited AuNPs were studied by X-ray photoelectron spectroscopy, atomic force microscopy, and field emission scanning electron microscopy. Effects of peak current density, pulse frequency, potassium iodide and cysteine on grain size, and morphology of the AuNPs were determined. Experiments showed that cathode current efficiency increases with the pulse frequency and the iodide ion. Size of the AuNPs increased with the current density. The number of... 

Na3MnCO3PO4 (NMCP) particles were synthesized via ball milling of Mn(NO3)2.4H2O, Na2HPO4.2H2O and Na2CO3.H2O powders. The particles were anchored onto reduced graphene oxide (rGO) sheets during hydrothermal reduction process under stirring. Materials produced were characterized by x-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric (TG) measurement and galvanostatic charge/discharge tests. Results showed that dissolution of ball milling products in DI water is an effective method for separation of NMCP from byproducts. Best milling time for production of pure NMCP of minimum particle... 

Novel Na3MnCO3PO4 (NMCP)/reduced graphene oxide (rGO) nanocomposite was successfully synthesized via one-step hydrothermal method. The produced materials were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetry (TG), galvanostatic charge/discharge test and inductively coupled plasma optical emission spectroscopy (ICP-OES). Obtained results indicate the formation of ∼25 nm NMCP nanoparticles randomly distributed on rGO sheets. As a promising cathode material for Na-ion batteries, the hybrids deliver gravimetric discharge capacities of... 

Pr doped spinel nanoferrites having following composition Cu Pr x Fe 2-x O 4 (x = 0, 0.25, 0.50, 0.75, 1.00) were synthesized using sol-gel route. Prosademium (Pr) which is a rare earth metal was doped to tailor the properties of the Cu spinel nanoferrites. Characterization tools such as FTIR, XRD, FESEM and VSM were employed to investigate the phase, absorption bands, structure, microstructure and magnetic properties. FTIR was used to see the absorption bands and force constants of the Pr doped Cu spinel nanoferrites. Crystallite size, lattice parameters, cell volume and micro strains were determined from XRD data. Bulk density, X-ray density and porosity of the Pr doped Cu spinel... 

Bioinspired materials can mimic the stem cell environment and modulate stem cell differentiation and proliferation. In this study, biomimetic micro/nanoenvironments were fabricated by cell-imprinted substrates based on mature human keratinocyte morphological templates. The data obtained from atomic force microscopy and field emission scanning electron microscopy revealed that the keratinocyte-cell-imprinted poly(dimethylsiloxane) casting procedure could imitate the surface morphology of the plasma membrane, ranging from the nanoscale to the macroscale, which may provide the required topographical cell fingerprints to induce differentiation. Gene expression levels of the genes analyzed... 

In this study, the influences of different concentrations of SiO 2 nano sized particles in the bath on deposition rate, surface morphology and corrosion behavior of Ni-P-SiO2 Composite coatings were investigated. The deposition rate of coating was influenced by incorporation of SiO2 particles. The microstructure was investigated with field emission scanning electron microscopy (FESEM). The amount of SiO 2 was examined by Energy Dispersive Analysis of X-Ray (EDX) and amount of SiO2 nanoparticles co-deposited reached a maximum value at 4.5 %wt. Corrosion behavior of coated aluminum was evaluated by electrochemical impedance spectroscopy (EIS) and polarization techniques. The results... 

(ZnO)1-x(CdO)x nanofibers were fabricated via electrospinning of polymer precursor by subsequent annealing in air. Field emission scanning electron microscopy (FESEM) showed the smooth and beadless nanofibers and X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed the ZnO hexagonal and the CdO cubic structure. Diffuse reflectance spectroscopy (DRS) showed the band gap energy reduction by increasing the amount of CdO in (ZnO)1-x(CdO)x nanofibers that resulted in the photocatalytic activity under the visible light for dye degradation. Under the UV light CdO acted as both electron and hole sink in the (ZnO) 1-x(CdO)x nanofibers and a possible photocatalytic activity... 

Because of corrosion resistance and antibacterial effects, shape memory Ni-Ti-Ag alloy can be considered for different biomedical applications. Mechanical alloying is used to produce nanostructured Ni-Ti-Ag alloy from elemental powders. X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) are used to characterize the product. Results show that after 1h milling, homogenous distribution of the elements occurs; while no intermetallic compounds is observed. After 3h milling, titanium dissolves in nickel to form amorphous and nanostructured solid phases. Peaks of B2 phase appear in the XRD pattern after the 3h milling of the powder mixture. Sintering of the 3h-milled...