Sharif Digital Repository

Lithium-Sulfur (Li-S) batteries are considered as one of the promising candidates for next-generation Li batteries in near future. Although, these batteries are suffering from certain drawbacks such as rapid capacity fading during the charge and discharge process due to the dissolution of polysulfides. In this paper, Sulfur/metal oxide (TiO2 and SiO2) yolk-shell structures have been successfully synthesized and utilized to overcome this problem and improve the electrochemical performance of sulfur cahtode material. Prepared materials have been characterized using Scanning Electron Microscopy(SEM), Transmission Electron Microscopy(TEM) and X-ray diffraction (XRD) techniques. The results show... 

This study demonstrates a novel, facile and one-pot approach to synthesize silica nanoparticles with silver at core and crust (SiNP-AgCC). A modified Stöber method was used to make SiNP-AgCC. A significant reduction in the size of SiO2 nanoparticles was seen, with 2–5 nm AgNPs being uniformly distributed on the surface and 10–20 nm AgNPs in the center. A typical mesoporous SiO2 particle (SiNP) produced using the Stöber method was transformed to nanoporous SiO2 by this modified Stöber method. Nanoporous SiO2 particles with silver in the center are advantageous for slow and consistent Ag+ release, which was confirmed by Ag+ ion release test. Antibacterial activities of the samples were tested... 

Perchloric acid immobilized on silica gel (SiO2-HClO4) has been utilized as a mild and cheap reagent for onepot preparation of different varieties of flavylium salts via tandem reaction of different acetophenones with Salicylaldehydes under solvent-free conditions. Different reaction conditions such as conventional heating and microwave irradiation have been investigated. The corresponding flavylium salts have been prepared in high yields. The procedure is milder and more convenient than the known procedures  

The application of bioglass coatings on metallic implants provides link between bone and materials and prevents corrosion of metallic implants in body fluid. Therefore, in this research, 45S5 bioglass-silica coatings on 316L stainless steel were prepared by the sol-gel method and were characterized by different techniques. According to X-ray diffraction (XRD) results, by sintering 45S5 bioglass at 600 C for 5 h, coatings containing both amorphous phase and Na2Ca2Si3O9 crystalline phase were obtained. Scanning electron microscopy (SEM) results showed that coatings prepared via appropriate sol aging and substrate preparations are crack-free. Potentiodynamic polarization tests in simulated body... 

Enolizable ketones have been reacted in a one-pot method with aromatic aldehydes, acetyl chloride and acetonitrile at room temperature in the presence of SnCl4/SiO2 to furnish the corresponding β-acetamidoketones in improved yields. Acetylation of an aromatic hydroxyl group was observed while using 4-hydroxybenzaldehyde or vanillin and the corresponding β-acetamidoketones were isolated in an excellent yield  

In this paper, we report the preparation of a new composite (TiO2/SiO2/γ-Fe2O3/rGO) with a high photocatalytic efficiency. The properties of the composite were examined by different analyses, including X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), photoluminescence (PL), UV-Visible light diffuse reflectance spectroscopy, Fourier transform infrared spectroscopy (FTIR), Raman, vibrating-sample magnetometer (VSM), and nitrogen gas physisorption (BET) studies. The photocatalytic efficiency of the proposed composite was evaluated by the degradation of methylene blue under UV and visible light, and the results were compared with titanium dioxide (TiO2), where... 

A very efficient and mild procedure for the trimethylsilylation of a wide variety of alcohols, including primary, allylic, benzylic, secondary, hindered secondary, tertiary, and phenols with hexamethyldisilazane on the surface of silica gel dispersed with LiClO4 in room temperature at few minutes in excellent yields under neutral conditions is reported. This procedure also allows the excellent selectivity under LP-SiO2 system for silylation of alcohols in the presence of amine and phenolic hydroxy groups  

A very efficient and mild procedure for the trimethylsilylation of a wide variety of alcohols, including primary, allylic, benzylic, secondary, hindered secondary, tertiary, and phenols with hexamethyldisilazane on the surface of silica gel dispersed with LiClO4 in room temperature at few minutes in excellent yields under neutral conditions is reported. This procedure also allows the excellent selectivity under LP-SiO2 system for silylation of alcohols in the presence of amine and phenolic hydroxy groups. © 2005 Elsevier B.V. All rights reserved  

Failure of concrete structures is usually accompanied by expansion of interior cracks due to stress concentration at the cracks tip. This phenomenon shows the importance of examination of the failure behavior of concrete structures. For this purpose, 4 types of concrete samples with different amounts of nano-SiO2 (0%, 0.2%, 0.5%, and 0.8%) were made to prepare some Central Straight-through Crack Brazilian Disk (CSCBD) specimens. The key focus of the investigation conducted was to investigate two assumptions. First, to check the pure mode I (tension) and pure mode II (shear) by compressing the standard discs with central cracks by an angle of 0° and 27° with respect to the loading axis;... 

This work studies the influence of surface modification of silica nanoparticles by mercaptopropyl trimethoxysilane on silica weight percent in Ni coating during electrodeposition. Results showed SiO2(CH2)3SH particles were embedded in the Ni coating up to 11%. Also, modified Guglielmi’s model and mechanicsm of nucleation of Ni-SiO2(CH2)3SH composite were studied. © 2017 The Electrochemical Society. All rights reserved  

Hexagonal core–shell SiO2[–MOYI]Cl–]Ag nanoframeworks were synthesized via surface modification of hexagonal silica nanoparticles prepared from perlite (EP) as a cheap and abundant raw material. The prepared samples were well characterized by X-ray diffraction powder (XRD), energy dispersive X-ray (EDX), diffuse reflectance spectroscopy (DRS), Brunauer–Emmett–Teller (BET) specific surface area analysis, fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM). The XRD patterns confirmed that Ag and AgCl crystalline phases were successfully loaded on the surface. The TEM images were also implied that the... 

A novel nanohybrid composite of TiO2, SiO2, γ-Fe2O3, and reduced graphene oxide (TiO2@Si:Fe:rGO) is fabricated by the sol-gel method. The properties of the coated film were examined by structural and self-cleaning analyses using simulated discoloration/soiling and roofing tests. The fabricated transparent TiO2@Si:Fe:rGO composite showed excellent photoactivity and wettability, behaving well in self-cleaning applications. The addition of SiO2 improved the crystalline structure and surface hydroxylation of TiO2 nanoparticles. γ-Fe2O3 decreased the recombination rate of e-/h+ pairs, and significantly improved photocatalytic activity under visible light. Moreover, rGO sheets as excellent... 

An intense decrease in cycling performance and safety is a challenge for elevated temperature application of LiNi0.5Co0.2Mn0.3O2 (NCM) cathode material. In this paper, effect of two types of nano-coatings on improvement of elevated temperature performance of NCM cathode material has been investigated. One of the coatings contains SiO2 nanoparticles and the other one contains composite of reduced graphene oxide and SiO2 nanoparticles (rGO-SiO2). The coatings were fabricated by a facile wet chemical method. The SiO2 coated cathode material showed an excellent elevated temperature cycling stability, however, a decrease in discharge capacity and rate capability of this sample was observed. On... 

Wettability alteration in porous media is one of the mechanisms for enhancing oil recovery through injecting low-salinity water into carbonate reservoirs, in which active ions can remove the carboxylic oil component from the rock surface, altering the rock's wettability toward a water-wet condition. This study investigated the concomitant effects of low-salinity water and hydrophilic SiO2 nanoparticles on oil-wet dolomite rock. Results revealed that low-salinity water coupled with hydrophilic nano-SiO2 in oil-wet dolomite rock remarkably affected the wettability alteration of the rock, showing that the simultaneous presence of ions in water and hydrophilic nano-SiO2 led to considerable... 

The high hydration potential of CaO and MgO phases restricted the application of Mag-Dol refractory composites. In this study, the impact of nano-silica (SiO2) addition on the physical, mechanical, thermo-mechanical as well as microstructure of Mag-Dol refractory composites is investigated. Mag-Dol compositions were prepared by using calcined dolomite and magnesite particles (micron, 0–1, 1–3, 3–5, and 5–8 mm), liquid resin, and 0, 0.5, 1, 1.5, 2, and 2.5 wt% nano SiO2 as additives. Specimens were heated up to 1650 °C for the 3 h soaking period. Fired specimens were characterized by physical (apparent porosity, bulk density, and hydration resistance), mechanical (cold crushing strength), and... 

In this paper, with the aim of enhancing the thermal conductivity of the fluid, a nanofluid is prepared based on SiO2. A series of experimental tests were carried out for both laminar and forced convection regimes in a horizontal tube with two different geometric shapes (circular and square cross section) subjected to constant wall heat flux (4735 W m−2). A comparative study has been done to investigate the effect of the geometry on the convective heat transfer. Moreover, the effect of the volume concentration on the behavior of the nanofluid and the base fluid was evaluated by comparing various volume concentrations (0.05, 0.07 and 0.2%). The experiments were done under two different... 

In this study, a noble robust superhydrophobic and highly oleophobic polyurethane (PU)–SiO2 nanoparticle (NP) coating is specially designed using sol-gel process. For this purpose the effective parameters on surface tension and durability of the synthesized coating investigated and optimized. This new superhydrophobic and highly oleophobic coating exhibits good pensile hardness as high as 6H with adhesive force grade of 5B and repels water and oil with contact angles (CAs) of 159° and 140° respectively. The synthesized PU-SiO2 composite also retains an excellent amphiphobicity after a 7 days immersion in water with water and oil with CAs of 150° and 130°. Facile fabrication of PU–SiO2... 

In this paper, with the aim of enhancing the thermal conductivity of the fluid, a nanofluid is prepared based on SiO2. A series of experimental tests were carried out for both laminar and forced convection regimes in a horizontal tube with two different geometric shapes (circular and square cross section) subjected to constant wall heat flux (4735 W m−2). A comparative study has been done to investigate the effect of the geometry on the convective heat transfer. Moreover, the effect of the volume concentration on the behavior of the nanofluid and the base fluid was evaluated by comparing various volume concentrations (0.05, 0.07 and 0.2%). The experiments were done under two different... 

The aim of this study was to investigate the influences of combination of the two different SiO2 nanoparticles (15 nm and 80 nm) on compressive, flexural and tensile strength of ternary blended concrete. SiO2 nanoparticles with two different sizes of 15 and 80 nm have been used as a partial cement replacement by 0.5, 1.0, 1.5 and 2.0 wt.% in 16 different proportions of mixture followed by curing in lime solution for 7, 28 and 90 days. The results indicate that in all curing ages in lime solution specimens with 2.0% of 15 nm plus 1.5% of 80 nm cement replacement achieved higher mechanical properties. The continuous cement paste with the lowest delicate zones might be due to the fact of quick... 

Buckling and post-buckling behaviors of geometrically imperfect annular sector plates made from nanoparticle reinforced composites have been investigated. Two types of nanoparticles are considered including graphene oxide powders (GOPs) and silicone oxide (SiO2). Nanoparticles are considered to have uniform and functionally graded distributions within the matrix and the material properties are derived using Halpin-Tsai procedure. Annular sector plate is formulated based upon thin shell theory considering geometric nonlinearity and imperfectness. After solving the governing equations via Galerkin’s technique, it is showed that the post-buckling curves of annular sector plates rely on the...