Loading...

Diffusion induced isothermal solidification during transient liquid phase bonding of cast IN718 superalloy

Pouranvari, M ; Sharif University of Technology

1083 Viewed
  1. Type of Document: Article
  2. DOI: 10.1179/1879139513Y.0000000076
  3. Abstract:
  4. In transient liquid phase (TLP) bonding for commercial applications, one of the important key parameters is the holding time required for complete isothermal solidification tIS, which is a prerequisite for obtaining a proper bond microstructure. The objective of the study is to analyse the isothermal solidification kinetics during TLP bonding of cast IN718 nickel based superalloy. Experiments for TLP bonding were carried out using a Ni-7Cr-4.5Si-3Fe-3.2B (wt-%) amorphous interlayer at several bonding temperatures (1273-1373 K). The time required to obtain TLP joints free from centreline eutectic microconstituents was experimentally determined. Considering the solidification behaviour of residual liquid, tIS could be predicted by a mathematical solution of the time dependent diffusion equation based on Fick's second law
  5. Keywords:
  6. Isothermal solidification ; Superalloy ; Transient liquid phase bonding ; Commercial applications ; IN718 ; Mathematical solutions ; Nickel- based superalloys ; Solidification behaviour ; Time-dependent diffusion ; Amorphous silicon ; Isotherms ; Liquids ; Nickel ; Solidification
  7. Source: Canadian Metallurgical Quarterly ; Vol. 53, issue. 1 , 2014 , p. 38-46
  8. URL: http://www.maneyonline.com/doi/full/10.1179/1879139513Y.0000000076