Sharif Digital Repository

Bones adapt their form and structure to make an efficient use of their mass against the applied mechanical loads. So, it is not surprising to assume that the geometry and density distribution of a bone contains information about its loading history. The objective of this work was to develop a framework to simulate the bone remodeling procedure as a topology optimization process and then use this framework to develop a simple technique for estimating the dominant joint loads based on the bone’s density distribution.
At first, the remodeling equation was derived from the structural optimization task of minimizing the strain energy in each time step, using the level set method. Employment... 

Bone scaffolds are combinations of several materials, for achieving suitable properties and usage for replacing with defected bone. In this study, TCP/Agarose scaffolds are fabricated by two different approaches. The first one is using polymer sponge and gel casting technique and the other one is using foaming agent in order to obtain scaffolds with same porosity. The results show that in spite of same structure and porosity, scaffolds have different mechanical properties due to their different morphologies. Compressive strength of the scaffolds which were fabricated using polymer sponge method is 2.25MPa and elastic modulus is 56.8MPa. After coating with Agarose, compressive strength... 

The purpose of this reaserch is to create a context in production of Bone Morphogenetic Protein-2 with more effective properties in Bone healing in Iran. Because of demand Of this protein in medical field it could cause an evalution in bone healing. The first section of this reaserch was the Construction of new recombinant plasmid carrying bone morphogenetic protein gene that was title of this thesis. First total RNA was extracted from ostosarcoma cancer cell line MG-63 followed by cDNA synthesis.For amplifying of the mature region of protein a pair of primer with tow restriction site was designed. After Success in PCR and obtaining PCR product with size of 343bp it transferd to vector... 

Magnesium and its alloys are potentialy biodegradable implant materials due to their attractive biological properties. But their poor corrosion resistance may result in sudden failure of the implants. Recently, many researchers have focused on applications of fluorine-doped hydroxyapatiteCa10(PO4)6(OH)2−xFx (FHA, x is the degree of fluoridation) as a bioactive coating to provide early stability and long-term performance. In comparison with pure HA coating,FHA coating could provide significant dissolution-resistant property, better apatite-like layer deposition, better protein adsorption, better cell attachment and improved alkaline phosphatase activity in cell culture. In this... 

This project aimed to fabricate the bone scaffolds with applying thermoplastic starch-based nano-biocomposites. The starting materials for this scaffold are as follows: thermoplastic starch, ethylene vinyl alcohol as the polymer matrix and nanoforsterite as the ceramic reinforcing phase. Furthermore, vitamin E was used as antioxidant for preserving starch against thermo-mechanical degradations. Likewise, 3D pore structure was developed using azo-dicarbonamide and water in injection moulding process. With blending thermoplastic starch and ethylene vinyl alcohol, some thermoplastic starch’s properties including degradation rate and water absorption were modified. In addition, having... 

Present study demonstrated carbon nanoparticles/acrylate-terminated polyurethane composites as promising materials for bone implants applications. Neat polymer and composites containing nanoparticles at different loadings up to 2 wt % were prepared by in situ polymerization method. Morphological analysis exhibited that nanoparticles caused considerable phase separation between soft and hard domains as well as increased crystallinity. Mechanical analysis showed a significant improvement in mechanical properties. Maximum improvement in tensile properties of APUA was observed at 1 wt% loading of ND-HEAMs, namely 175% improvement in modulus. In vitro biocompatibility evaluation via culturing... 

Drug-eluting bone implant coatings is a new era that has gained a lot of attention in recent years. In this matter, drug is loaded in the coating and local and targeted release of the drug results in preventing the side effects of implantation and increasing the healing process of the patient. The aim of this project was to synthesis the antibiotic eluting chitosan-based composite using electrophoretic deposition for bone implant coating. By using electrophoretic deposition chitosan and chitosan-bioglass composite coatings were synthesized. Then the probability of loading of drug into coating by using electrophoretic deposition was evaluated and by using this process chitosan and... 

In present work, hydroxyapatite nano-rods are synthesized using a simple sol-gel method with calcium nitrate and potassium dihydrogenphosphate as calcium and phosphorus precursors respectively and ammonia was used for adjusting the pH=9. To obtain rod shape hydroxyapaite powder, multi wall carbon nanotubes were added to the solution, nHA powder was calcinated at 60 and 450 ℃. In second step, chitosan-gelatin/nanoHA solution were prepared by blending chitosan and gelatin in different concentrations with nanoHA powder, then the solution was freeze dried to maintain a composite scaffold. The prepared HA powder and bio-composite scaffold were characterized by X-ray diffraction (XRD), field... 

Tissue regeneration by bio-compatible/degradable scaffolds is one of the widely used approaches in the field of tissue engineering. In this study, a thermoplastic starch based nanocomposite scaffold with gradient structure was fabricated by unidirectional freeze drying method. To increase the stability of the scaffold in the aqueous media, PVA was added to starch solution. Then, the PVA and starch molecules were cross-linked by adding citric acid to the mixture. On the one hand, to improve the mechanical properties of the scaffold, and control its bio-degradability on the other, cellulose nano-fibers were employed. Also, the bioactivity of the scaffold was induced by using hydroxyapatite... 

Bashti Bone Plug Technique (BBPT) is an implant-less method which can be used in an Anterior Cruciate Ligament (ACL) reconstructive surgery. The technique uses a core bone plug to fix the tendon graft into the bone tunnel. This study investigates the effect of the core bone density on fixation strength in BBPT method. A series of experimental test has been performed to examine the hypothesis of the study. Thirty fresh bovine digital extensor tendon used in three different groups. Sawbones blocks with densities of 160, 240 and 320 kg/m^3 used in substitute of the bone to model the effect of density on the strength of the fixation. The core bone plugs and tunnels created using a custom made... 

During femur fracture reduction surgery, both patients and surgeons are exposed to a great amount of radiation, which is harmful to their health. Computer-assisted orthopaedic surgery (CAOS) is a less invasive approach for its ability to reduce the usage of image intensifiers. Various robots have been developed for femur fracture reduction surgery. Most of these robots are based on serial architectures. Both low load-carrying capacity and poor accuracy are inherent to serial robots, which makes them inappropriate for femur fracture reduction. Some parallel robots using the “Stewart platform” have also been developed for femur fracture reduction, but their restricted workspace limits their... 

Since ancient time, healing patients suffering from bone deformities has been one of the most important challenges of physicians. In recent decades, by helping bio mechanic engineers external fixators has been used for this purpose. These fixators divided to parallel and series forms. One of the remarkable merit of parallel external fixators is their high maneuverability. These fixators usually have six degree of freedom, and follow the movement’s pattern of Stewart robots. In this project by studying different fixators which has been commercials, we present two conceptual models of these fixators which three and four legs are used for connecting the lower and upper plates, respectively. The... 

Treatment of critical-size bone defects caused by sport injuries, accidents, trauma, infection, and osteoporosis remains a major clinical challenge. In order to repair or regenerate large bone defects, bioactive three-dimensional scaffolds play a key role due to their multilevel porous structure, high surface area, enhanced mass transport and diffusion. Many studies reported that macropore diameters greater than 500 µm can lead to vascularized bone tissue. In this study, a hierarchically porous composite scaffold was prepared. Hierarchically porous silk fibroin- bioactive glass composite and fibroin scaffold were fabricated with controlled architecture and interconnected structure with... 

Interconnected–pore titanium scaffolds were fabricated by sintering of compressed mixture of TiH1.924 and urea or NaCl. Urea was removed by evaporation during sintering and NaCl was removed with water. TiH1.924 was used to enhance gas evolution for perpetuation of foam formation. Morphological studies of the spacer-removed scaffolds showed that the spacer shapes were replicated to the pores. Minimization of stress concentration at walls of the pores was, hence, helped by utilization of the spacers with spherical particles. The scaffolds having relative densities of 0.34 to 0.65 consisted pores of 200 to 600 μm diameter, compression strengths of 51 to 260 MPa, Young’s modulus of 6.3 to 22.66... 

Bone is one of the most important biomechanical organs in animal bodies which comprises of a dynamic tissue that can change its internal structure through remodeling process. A comprehensive understanding of this process is of great significance in prevention and cure of many bone diseases. Due to the special conditions of hard bone tissue, empirical studies on the details of bone processes is very costly and time consuming. Thus, mathematical models and in silico simulations are key to unraveling how bone homeostasis imbalance can lead to pathological conditions. Therefore, in the recent years, there has been an increasing interest in modeling bone remodeling process in cellular level. In... 

The natural tissue of the bones consists of organic and inorganic parts. The bone mineral part contains calcium phosphate and its organic part is mainly of collagen fibers. The combination of these fibers and calcium phosphate makes the bone flexible and resistant to stresses. Many conditions, including osteoporosis and crashes, lead to fractures and cavities in bone. Bone cements are the most used materials used in orthopedic surgeries and spinal cord.The purpose of this study was to synthesis acrylic bone cement with properties determined by ASTM F 451 and Iso5833 for orthopedic applications, including joint replacement. Polymethyl methacrylate polymer was synthesized as the main component... 

In recent years, many studies have conducted research about stem cells due to their prominent features such as proliferation and differentiation. By changing the specific parameters of the cellular micro-environment, it is possible to determine the stem cells fate and thereby use them in medical affairs. For this purpose, various devices and methods have been designeds such as microfluidic devices and scaffolds. The microfluidic devices has been especially focuced in the researchs due to their unique features, like the possibility of testing with small amounts of samples, the creation and control of low cost cellular micro-environment and low practical time. Two-dimensional scaffolds made up... 

With the increase in the average age of the world's population, osteoporosis is a worldwide incidence. This disease, along with natural disasters, are important factors in the occurrence of fractures in various bones of the body. One of the methods for solving this problem and replacing with broken body bones is the use of metal implants with hydroxyapatite-based coatings. One of the common problems with using implants in the body is the infection in the adjacent parts of the implant. To overcome this problem, several studies have been carried out on the use of hydroxyapatite coatings with metal ions or antibacterial oxide compounds. In the present study, the influence of factors such as the... 

Modified Fish-Bone (MFB) Model and Consistent Generic (CG) Model are simplified Multi-Degrees-of-Freedom (MDOF) models, proven to be valuable tools in estimating seismic demands of moment-resisting frames, aimed to reduce the computational costs by decreasing the number of degrees of freedom. The preliminary expansion of these simplified models for steel moment resisting frames (SMRFs) were proposed by considering elastoplastic behavior and is not able to take into account stiffness and strength deteriorations in nonlinear dynamic behavior of structures. However, behavior deterioration affects seismic demands of SMRFs under intense earthquakes. For this reason, the present study is done to... 

This work describes the effect of hydroxyapatite with different morphology including nanorods and whisker on the properties of hydroxyapatite/polycaprolactone (HA/PCL) composite. Biodegradable polymer/Hydroxyapatite (HA) composites with the morphology of nanorods and whisker of (HA) as bone replacement scaffolds are synthesized by sol-gel and hydrothermal methods, respectively with a Ca/P ratio of 1.67 and 20:80 (HA/PCL).The crystallization behavior and porosity of HA/PCL composite are studied by scanning electron microscope and X-Ray diffraction. The response of bone marrow-derived human mesenchymal stem cells (hMSCs) in terms of cell proliferation and differentiation to the osteoblastic...