Sharif Digital Repository

With current memory scalability challenges, Phase-Change Memory (PCM) is viewed as an attractive replacement to DRAM. The preliminary concern for PCM applicability is its limited write endurance that results in fast wear-out of memory cells. Worse, process variation in the deep-nanometer regime increases the variation in cell lifetime, resulting in an early and sudden reduction in main memory capacity due to the wear-out of a few cells. Recent studies have proposed redirection or correction schemes to alleviate this problem, but all suffer poor throughput or latency. In this article, we show that one of the inefficiency sources in current schemes, even when wear-leveling algorithms are used,... 

Although phase change memory with multi-bit storage capability (known as MLC PCM) offers a good combination of high bit-density and non-volatility, its performance is severely impacted by the increased read/write latency. Regarding read operation, access latency increases almost linearly with respect to cell density (the number of bits stored in a cell). Since reads are latency critical, they can seriously impact system performance. This paper alleviates the problem of slow reads in the MLC PCM by exploiting a fundamental property of MLC devices: the Most-Significant Bit (MSB) of MLC cells can be read as fast as SLC cells, while reading the Least-Significant Bits (LSBs) is slower. We propose... 

Bioinspired materials can mimic the stem cell environment and modulate stem cell differentiation and proliferation. In this study, biomimetic micro/nanoenvironments were fabricated by cell-imprinted substrates based on mature human keratinocyte morphological templates. The data obtained from atomic force microscopy and field emission scanning electron microscopy revealed that the keratinocyte-cell-imprinted poly(dimethylsiloxane) casting procedure could imitate the surface morphology of the plasma membrane, ranging from the nanoscale to the macroscale, which may provide the required topographical cell fingerprints to induce differentiation. Gene expression levels of the genes analyzed... 

In this paper, a two-dimensional, two-phase, non-isothermal model is presented to predict the electrochemical, mass transfer and heat transfer behaviors in a direct methanol fuel cell (DMFC). Governing equations including the momentum, continuity, heat transfer, proton and electron transport, species transport for water, methanol, and all the gas species (carbon dioxide, methanol vapor, water vapor, oxygen, and nitrogen) and the auxiliary equations are coupled to studying the various phenomena in DMFC. The modeling results agree well with the four different experimental data in an extensive range of operation conditions. A parametric study is also performed to examine the effects of the cell... 

During any microbial enhanced oil recovery process, both cells and the metabolic products of bacteria govern the tertiary oil recovery efficiency. However, very accurate examination is needed to find the functionality of these tiny creatures at different reservoir conditions. In this regard, the effect of cell structure on ultimate microbial recovery efficiency which is the most dominant mechanism based on the microorganism types (gram-negative or gram-positive) was systematically investigated. At the first stage, possible different active mechanisms using Bacillus stearothermophilus SUCPM#14 strain were tested using specially designed injection protocol, in situ and ex situ core flooding... 

TOR is one of the most famous anonymity networks. TOR works correctly when at least one honest relay exists along an established circuit. However, many attacks reveal anonymity of TOR communications by watermarking traffics, changing timings, counting cells per packets, and recently, introducing errors in cells. This paper focuses on protocol-level attacks which can de-anonymize users by changing a cell, and provides a solution for this attack by changing the way integrities of cells are checked. The proposed design allows all relays, not just the exit node, to check the integrity of cells, independently. In addition, this paper proposes a novel method, based on the concept of... 

A fast statistical method for the analysis of the Read SNM of a 6 T SRAM cell in near/subthreshold region is proposed. The method is based on the nonlinear behavior of the cell. DIBL and body effects are thoroughly considered in the derivation of an accurate closed form solution for the Read Static Noise Margin (SNM) of the near/subthreshold SRAM cell. This method uses the state space equation to derive the Read SNM of the cell as a function of threshold voltage of cell transistors. This function shows the dependency of the Read SNM on sizing, VDD, temperature, and threshold voltage variations. It provides a fast reliability analysis for a cell array of a given size and a supply voltage. It... 

Using density functional theory combined with non-equilibrium Green's function method, we have investigated the electronic and transport properties of graphenes defected by one and two carbon ad-dimers (CADs), placed parallel to the graphene lattice. Addition of these CADs to graphenes creates 3D paired pentagon-heptagon defects (3D-PPHDs). The band structure, density of states (DOS), quantum conductance, projected DOS, as well as the current-voltage characteristic per graphene super-cells containing each type of 3D-PPHD are calculated. The local strain introduced to graphene by 3D-PPHDs forces the C-bonds in the dimers to hybridize in sp 3-like rather than sp 2-like orbitals, creating... 

This brief introduces a differential eight-transistor static random access memory (SRAM) cell for subthreshold SRAM applications. The symmetric topology offers a smaller area overhead compared with other symmetric cells for the same stability in the read operation. Two transistors isolate the cell storage nodes from the read operation path to maintain the data stability of the cell. This topology improves the data stability at the expense of read operation delay. Thorough postlayout Monte Carlo worst corner simulations in 45-nm CMOS technology are conducted. The proposed cell operates down to 0.35 V with a read noise margin of 74 mV and a write noise margin of 92 mV. Under this condition,... 

Graphene nanogrids (crossed graphene nanoribbons synthesized by the oxidative unzipping of multi-walled carbon nanotubes) on a SiO2 matrix containing TiO2 nanoparticles (NPs) were applied as a photocatalytic stimulator in the accelerated differentiation of human neural stem cells (hNSCs) into two-dimensional neural networks. The hydrophilic graphene nanogrids exhibited patterned proliferations of hNSCs (consistent with patterns of the nanogrids), in contrast with the usual random growths occurring on quartz substrates. The number of cell nuclei differentiated on reduced graphene oxide nanoribbon (rGONR) grid/TiO2 NPs/SiO2 increased ∼5.9 and 26.8 fold compared to the number of cells on quartz... 

For the application of human neural stem cells (hNSCs) in neural regeneration and brain repair, it is necessary to stimulate hNSC differentiation towards neurons rather than glia. Due to the unique properties of graphene in stem cell differentiation, here we introduce reduced graphene oxide (rGO)/TiO2 heterojunction film as a biocompatible flash photo stimulator for effective differentiation of hNSCs into neurons. Using the stimulation, the number of cell nuclei on rGO/TiO2 increased by a factor of ∼1.5, while on GO/TiO2 and TiO2 it increased only ∼48 and 24%, respectively. Moreover, under optimum conditions of flash photo stimulation (10 mW cm-2 flash intensity and 15.0 mM ascorbic acid in... 

Escherichia coli is widely used host for the intracellular expression of many proteins. However, in some cases also secretion of protein from periplasm was observed. Improvement of both intracellular and extracellular production of recombinant protein in E. coli is an attractive goal in order to reduce production cost and increase process efficiency and economics. Since heat shock proteins in E. coli were reported to be helpful for protein refolding and hindering aggregation, in this work different types of single and periodic heat shocks were tested on lab scale to enhance intracellular and extracellular protein production. A single heat shock prior to induction and different oscillatory... 

Controlling topographic features at all length scales is of great importance for the interaction of cells with tissue regenerative materials. We utilized an indirect three-dimensional printing method to fabricate polymeric scaffolds with pre-defined and controlled external and internal architecture that had an interconnected structure with macro- (400-500 μm) and micro- (∼25 μm) porosity. Polycaprolactone (PCL) was used as model system to study the kinetics of tissue growth within porous scaffolds. The surface of the scaffolds was decorated with TiO2 and bioactive glass (BG) nanoparticles to the better match to nanoarchitecture of extracellular matrix (ECM). Micrometric BG particles were... 

As technology scales the area constraint is becoming less restrictive, but soft error rate and leakage current are drastically increased with technology down scaling. Therefore, in nano-scaled CMOS technology, the reduction of soft error rate and leakage current is the most important challenge in designing field programmable gate arrays (FPGA). To overcome these difficulties, based on the observations that most configuration bit-streams of FPGA are zeros across different designs and that configuration memory cells are not directly involved with signal propagation delays in FPGA, this paper presents a new family of configuration memory cells for FPGAs in nano-scaled CMOS technology. When... 

Design and operation of an opto-mechanical system employing a double-cell is reported here for the color liquid reflection studies. The reported system consists of a double-fiber optical design and an electro-mechanical scanning system. In this arrangement one fiber transmits the source light to the object surface and the second one transmits the light reflected from the sample to a photodetector. By scanning the double-fiber assembly in one-direction reflection properties of different color liquids are investigated. Reflection signals depend on the cell surface structure and the cell filled material. Two sets of flat/cylindrical cells made of almost similar glass materials are used for this... 

In recent years there has been potential increase in the use of alkaline protease as industrial catalysts. Many major industrial and commercial applications, such as food and textile industries, and medical diagnoses, are highly dependent on the protease enzyme. In the cell immobilization technique, the free movement of microorganisms is restricted in the process, and a continuous system of fermentation can be used. In the present work, this technique has been used for alkaline protease production using different carriers, such as chitosan, corn cob and corn tassel. Enzyme activity before immobilization (72 h) was 78.3 U/ml. Corn cob, with 65% immobilization capacity and the highest enzyme... 

In the present research, the introduction of multi-walled carbon nanotubes (MWCNTs) into the hydroxyapatite (HA) matrix and dip coating of nanocomposite on titanium alloy (Ti-6Al-4V) plate was conducted in order to improve the performance of the HA-coated implant via the sol-gel method. The structural characterization and electron microscopy results confirmed well crystallized HA-MWCNT coating and homogenous dispersion of carbon nanotubes in the ceramic matrix at temperatures as low as 500 C. The evaluation of the mechanical properties of HA and HA/MWCNT composite coatings with different weight percentages of MWCNTs showed that the addition of low concentrations of MWCNTs (0.5 and 1 wt.%)... 

Single-layer reduced graphene oxide nanoribbons (rGONRs) were obtained through an oxidative unzipping of multi-walled carbon nanotubes and a subsequent deoxygenation by hydrazine and bovine serum albumin. Human mesenchymal stem cells (hMSCs) were isolated from umbilical cord blood and used for checking the concentration- and time-dependent cyto- and geno-toxic effects of the rGONRs and reduced graphene oxide sheets (rGOSs). The cell viability assay indicated significant cytotoxic effects of 10 μg/mL rGONRs after 1 h exposure time, while the rGOSs exhibited the same cytotoxicity at concentration of 100 μg/mL after 96 h. The oxidative stress was found as the main mechanism involved in the... 

In this paper, we investigated phase synchronization in delayed dynamical networks. Non-identical spiking Hindmarsh-Rose neurons were considered as individual dynamical systems and coupled through a number of network structures such as scale-free, Erdos-Rényi, and modular. The individual neurons were coupled through excitatory chemical synapses with uniform or distributed time delays. The profile of spike phase synchrony was different when the delay was uniform across the edges as compared to the case when it was distributed, i.e., different delays for the edges. When an identical transmission delay was considered, a quasi-periodic pattern was observed in the spike phase synchrony. There... 

The front part of a cell is divided to two regions called lamellum and lamellipodium (lamellipodial). This part plays an essential role for cell migration. Indeed, there are many protein filaments called actin in lamellum and lamellipodium, which induce the cell motion with polymerization in the leading edge of the cell. The actin filaments adhere to the extracellular matrix (ECM) by means of focal adhesions and they have contact by myosin motor proteins. The myosin motor proteins cause actin retrograde and anterograde flow exerted contractile stress on them. The focal adhesions exert frictional stress on the actin filaments. In this work, we developed a two-dimensional continuum model of...