Sharif Digital Repository

Orthopaedic implant-associated infections are one of the most serious complications in orthopaedic surgery and a major cause of implant failure. In the present work, drug-eluting coatings based on chitosan containing various amounts of vancomycin were prepared by a cathodic electrophoretic deposition process on titanium foils. A three-step release mechanism of the antibiotic from the films in a phosphate-buffered saline solution was noticed. At the early stage, physical encapsulation of the drug in the hydrogel network controlled the release rate. At the late stage, however, in vitro degradation/deattachment of chitosan was responsible for the controlled release. Cytotoxicity evaluation of... 

Multi-component photocatalysts based on apatite-coated Ag/AgBr/TiO(2) were prepared by the deposition method. The effects of various kinds of apatites, with hydroxyl and fluoro substituents, on photocatalytic activity were investigated. The antibacterial processes in the dark, and under visible light, on two types of bacteria indicate that the multi-composites can inhibit the growth of bacteria by two different mechanisms. TEM images and optical microscopic data demonstrate that by attaching the nanosize catalyst to the outer membrane of the cell, the bacteria could not derive nourishment from surrounding media, i.e. this component acts as bacteria-static. The mechanism for deactivation of... 

There are different thermodynamic models that have been applied for modelling of asphaltene precipitation caused by various reasons, such as solvent/CO2 injection and pressure depletion. In this work, two computer codes based on two different asphaltene precipitation thermodynamic models-the first being the thermodynamic micellization model with a different characterization approach and the second being the solid model-have been developed and used for predicting asphaltene precipitation data reported in the literature as well as in the obtained data for Sarvak reservoir crude, which is one of the most potentially problematic Iranian heavy oil reserves under gas injection conditions. For the... 

In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, and the oil and gas phases are modeled with an equation of state. The Peng-Robinson equation of state (PR-EOS) was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on the solid model was developed and used for predicting asphaltene precipitation data reported in the literature as well as the experimental data obtained from high-pressure, high-temperature asphaltene precipitation experiments performed on Sarvak reservoir... 

The conductive CuCo2O4 spinel coating is applied on the surface of the AISI 430 ferritic stainless steel by the dip-coating sol-gel process and it is evaluated in terms of the microstructure, oxidation resistance and electrical conductivity. The results show that the CuCO2O 4 coating forms a double-layer scale consisting of a Cr, Fe-rich subscale and Cu-Co spinel top layer after 500 h in air at 800 °C. This scale is protective, acts as an effective barrier against Cr migration into the outer oxide layer and alleviates the cathode Cr-poisoning. The oxidation resistance is significantly enhanced by the protective coating with a parabolic rate constant of 5.8 × 10-13 gr2 cm-4 s -1, meanwhile... 

Vertically aligned ZnO nanowires (NWs) hybridized with reduced graphene oxide sheets (rGO) were applied in efficient visible light photoinactivation of bacteria. To incorporate graphene oxide (GO) sheets within the NWs two different methods of drop-casting and electrophoretic deposition (EPD) were utilized. The EPD method yielded effective penetration of the positively charged GO sheets into the NWs to form a spider net-like structure, whereas the drop-casting method resulted in only a surface coverage of the GO sheets on top of the NWs. The electrical connection between the EPD-incorporated sheets and the NWs was checked by monitoring the electron transfer from UV-assisted photoexcited ZnO... 

Co-deposition of RF-sputtering and RF-PECVD from acetylene gas and Au target were used to prepare sensor chip of gold nanoparticles (Au NPs). Deposition conditions were optimized to reach a Localized Surface Plasmon Resonance (LSPR) sensor chip of Au NPs with particle size less than 10 nm. The RF power was set at 180 W and the initial gas pressure was set at 0.035 mbar. Transmission Electron Microscopy (TEM) images and Atomic Force Microscopy (AFM) data were used to investigate particles size and surface morphology of LSPR sensor chip. The Au and C content of the LSPR sensor chip of Au NPs was obtained from X-ray photoelectron spectroscopy (XPS). The hydrogenated amorphous carbon (a-C:H)... 

The authors present the results of numerical tests and simulations to investigate and analyze the likelihood of asphaltene precipitation and deposition during CO2 flooding in a reservoir. The effects of asphaltene precipitation on oil properties such as oil viscosity and density during miscible CO2 flooding process were elaborated by using Winprop software of Computer Modeling Group. Also oil properties change during CO 2 miscible flooding by numerical slim tube were investigated by a compositional simulator (GEM). A fluid sample of Saskatchewan Reservoir that had been flooded miscibly with CO2 was chosen for performing the sensitivity analyses. The results showed that asphaltene... 

There is still an open question of how to prepare high-performance counter electrodes for dye solar cells (DSCs) at room temperature; a requirement for flexible DSCs. Here, we introduce Pt deposited cube-like chromium coating as a low-temperature highly-efficient counter electrode for DSCs. Cr is a chemically stable metal and can be easily electroplated on conductive substrates with high roughness (here ∼160 nm) and cube-like appearance. A cyclic electrochemical deposition method with optimized temperature and number of cycles is used to grow Pt nanoparticles on this surface and charge transfer resistance as low as 0.54 Ω cm2 and 0.27 Ω cm2 were obtained at 40 °C and 55 °C solution... 

In this article, dynamic core flood experiments in miscible CO2 condition were carried out to investigate core damage due to asphaltene deposition. Carbonate and sandstone cores were used to study of effect of core characteristic on permeability and porosity reduction. The experimental results show asphaltene deposition preferentially in sandstone core type takes place in the first half of the core while in the carbonate one it occurs in the second half. In spite of asphaltene content measurement results (IP-143) that show higher asphaltene deposition in sandstone cores, permeability impairment compared to the carbonate one is severe. Also, permeability-porosity reduction models are affected... 

In this work, the electrophoretic deposition method was utilized to immobilize TiO2 particles on stainless steel substrates. In addition, for the first time, statistics-based experimental design using response surface methodology was employed to investigate the effect of four key coating parameters (i.e. applied voltage, calcination temperature, photocatalyst weight percentage, and deposition time) on the photocatalytic degradation. Analysis of variance revealed that the proposed model was adequate. X-ray diffraction and scanning electron microscope were used to evaluate the effects of the parameters on degradation efficiency. The optimum applied voltage, calcination temperature, catalyst... 

This paper is a continuation of our previous paper (part 1; 10.1021/ef401857t), which discussed the roles of different phenomena effecting the deposition of asphaltene from model oil systems and before the onset of asphaltene precipitation. The study in this paper is to understand the depositional tendency of asphaltene using a quartz crystal microbalance with dissipation (QCM-D) measurements and their corresponding modeling for real crude oil systems with emphasis after the onset of asphaltene precipitation  

Modeling the behavior of suspended particles in gaseous phase is important for diverse reasons; e.g. aerosol is usually the main subject of CFD simulations in clean rooms. Additionally, to determine the rate and sites of deposition of particles suspended in inhaled air, the motion of the particles should be predicted in lung airways. Meanwhile there are two basically different approaches to simulate the behavior of particles suspension, Lagrangian and Eulerian approaches. This study compares the results of these two approaches on simulating the same problem. An in-house particle tracking code was developed to simulate the motion of particles with Lagrangian approach. In order to simulate the... 

In this study, the influences of different concentrations of SiO 2 nano sized particles in the bath on deposition rate, surface morphology and corrosion behavior of Ni-P-SiO2 Composite coatings were investigated. The deposition rate of coating was influenced by incorporation of SiO2 particles. The microstructure was investigated with field emission scanning electron microscopy (FESEM). The amount of SiO 2 was examined by Energy Dispersive Analysis of X-Ray (EDX) and amount of SiO2 nanoparticles co-deposited reached a maximum value at 4.5 %wt. Corrosion behavior of coated aluminum was evaluated by electrochemical impedance spectroscopy (EIS) and polarization techniques. The results... 

Although CO2 injection significantly increases the amount of oil recovered, it can cause asphaltene deposition in oil reservoirs. Asphaltene deposition leads to formation damage, in which treatment is a costly and problematic operation. In this work, impact of asphaltene precipitation and deposition during CO2 injection are investigated for recombined oil both in sandstone and carbonate core samples through dynamic flow experiments. Injection of oil and CO2 was performed simultaneously. Then, pressure drops along the core were recorded continuously to estimate permeability reductions during the experiments. Online viscosity of injected fluid was measured by a designed capillary viscometer.... 

Hydroxyapatite (HA) coatings in and onto anodized TiO2 nanotube arrays were presented and prepared by electrophoretic deposition technique (EPD). Coatings were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). EPD proved to be an innovative and versatile technique to coat HA on and into nanotubular structures of TiO2 with enhanced adhesion between nanotubes and HA particles provided by mechanical interlocking. After EPD of HA on TiO2 layer, samples were sintered at 400 °C, 600 °C and 800 °C for 2 h in an Ar atmosphere. Effect of EPD processing parameters on thickness of the deposits and rate of deposition was elucidated for HA coatings on the nanotubular TiO2... 

Pure Zn and Zn matrix composite coatings containing nano-sized SiC particles with an average size of 50 nm were prepared from the zinc sulfate bath. The effects of the pulse frequency, maximum current density and duty cycle on the amount of particles embedded were examined. Electron microscopic studies revealed that the coating morphology was modified by the presence of SiC nanoparticles. In the presence of SiC nanoparticles deposit grows in outgrowth mode resulting in a very rough and porous microstructure. However, at very low and very high duty cycles a smooth and pore free microstructure was obtained. Corrosion resistance properties of the coatings were studied using potentiodynamic... 

Asphaltene deposition has hindered oil production from asphaltenic oil reservoirs through deposition in reservoir rock and surface facilities. This paper investigates the effect of resin on asphaltene deposition at different pressures. To investigate the asphaltene deposition in the presence of resins at reservoir temperature and different pressures, a pressure, volume, and temperature (PVT) visual cell was designed. A high-resolution microscope and image processing software were used to detect and determine the amount of deposited asphaltene as well as its size distribution at different conditions. Two types of Iranian crude oils with different potential of deposition (low and high) were... 

Among the asphaltene flow assurance issues, the most major concern because of asphaltene is its potential to deposit in reservoir, well tubing, flow lines, separators, and other systems along production lines causing significant production losses. Hence, the focus of this study is to understand the depositional tendency of asphaltene using quartz crystal microbalance with dissipation (QCM-D) measurements. The results are presented in two consecutive papers, with this paper (part 1) dealing with model oil systems. The depositing environment is varied by changing the system temperature, asphaltene polydispersity, solvent (asphaltene stability), depositing surface, and flow rate. This paper... 

In the upstream asphaltene flow assurance community, both academics and industries are actively involved to predict the asphaltene deposit profile in wellbores and pipelines. Essential information for such a study is the amount of asphaltenes that can precipitate and, hence, deposit. In this work, the perturbed chain form of the statistical associating fluid theory (PC-SAFT) is applied to predict the asphaltene precipitation onset condition as well as the amount of precipitate under pressure depletion and high-pressure and high-temperature gas injection conditions. Previous PC-SAFT asphaltene studies in crude oil required the compositional data for both flashed gas and flashed liquid. This...