Sharif Digital Repository

Nowadays, thin films have many applications in every field. So, in order to improve the performance of thin film devices, it is necessary to characterize their mechanical as well as electrical properties. In this research work we focus on the development of a model for the analysis of the mechanical and electrical properties of silver nanoparticles deposited on silicon substrates. The model consists of inter-particle diffusion modeling and finite element analysis. In this study, through the simulation of the sintering process, it is shown that how the geometry, density, and electrical resistance of the thin film layer are changed with sintering conditions. The model is also used to... 

In common catamaran vessels, demihulls are parallel to each other. In this paper, the total resistance of a catamaran vessel with non-parallel demihulls is investigated experimentally and numerically. Experiments are carried out at different Separation Ratios (S.R.), that is the ratio of fore to aft separation of the catamaran demihullsand also in two ratios of length to separation in amidships (L/Sm). The FLUENT solver, based on the Finite Volume Method (FVM), was used for numerical solution. Applying the VOF model, the free surface around the catamaran vessel and total resistance are calculated and compared with experimental results. Finally, the frictional resistance of the catamaran from... 

Electrical behavior of hybrid conductive composites made of phenolic resin, graphite woven, glass woven and graphite nano powder has been studied for the first time in the present research to apply as collecting plates in electro static precipitators. To this purpose, two types of four-layer composites smeared with phenolic resin by different amounts of graphite nano powder then produced at 120°C and 200 bars with proper curing cycle. Finally, electrical resistivity of all the plates undergoing impact loading after different rapping cycles was measured by means of a repetitive rapping tester system particularly manufactured for this task. This study performs changes in mechanical behavior of... 

In this paper, we propose a circuit model for two-dimensional arrays of metallic square holes located on a homogeneous substrate, in order to propose a new scheme containing this type of metamaterials to obtain transparent electrodes with simultaneous terahertz transparency and low electrical resistance. The results of the introduced circuit model, which is a fully analytical model with explicit expressions, are in almost complete agreement with the full-wave simulations. Thanks to this analytical model, we can employ standard binomial matching transformer in order to minimize the reflected power from the structure at a desired frequency. Furthermore, taking advantage of this model, we... 

Theoretical stability analysis of broadband cascode amplifiers at high frequencies is presented. The stability of the amplifier in the presence of parasitic inductive components is thoroughly investigated. It is shown that the stability can be improved by inserting a series resistance in the gate of common-gate device of the cascode amplifier. To ensure stability, the gate resistance should be selected within specific ranges that are derived analytically. Based on the insights provided by the analyses, several practical design guidelines are given to improve the stability of high-frequency broadband cascode amplifiers. Finally, the derived results are adopted in stabilisation of an X-band... 

Lanthanum chromite coating occupies a noticeable position as a ceramic coating on metallic interconnects in solid oxide fuel cells because of its excellent electrical conductivity, high oxidation resistance and desirable chemical stability in both oxidizing and reducing atmospheres. In the present work, a sol-gel process based on the dip-coating technique was used to prepare dense and uniform coatings on metallic alloy for interconnect application (AISI 430 type). The effect of strontium and calcium doping into lanthanum chromite structure on electrical conductivity and oxidation behavior of the coated sample has been investigated. The oxidation behavior was evaluated by cyclic oxidation... 

In this brief, we use the alpha power law model for MOS devices to reach a more accurate modeling of CMOS buffers in very deep submicrometer technologies. We derive alpha model parameters of a CMOS buffer for 90-, 65-, and 45-nm technologies using HSPICE simulations. By analytical efforts we find the output resistance of a minimum-size buffer and compare it with those extracted from HSPICE simulations. We propose a new model for the output resistance of a given-size buffer in any technology, which demonstrates 3% error on average as opposed to the conventional model. Also a new buffer resistance is proposed analytically and numerically to calculate the crosstalk for interconnect analysis... 

The Finite element method was used for evaluation of the effects of material properties on the mechanical performance of the new geometry designed for the Z-shaped open-cell femoral artery self-expanding stent, made of Nitinol wire, by application of crushing force. The behavior of the stents, having two sets of properties, was compared. The stents with higher Af temperature show better clinical behavior due to lower chronic outward force, higher radial resistive strength and more suitable superelastic behavior. Model calculations show that a large change of Af temperature could exert a substantial effect on the practical performance of the stent  

The influence of variable fluid properties on mixed electroosmotic and pressure driven flow of non-Newtonian fluids is investigated in this paper. The non-linear coupled energy and momentum equations are solved by means of an iterative numerical approach. The results reveal that the temperature dependent effects only become significant at very high values of the Debye-Hückel parameter in case of combined electroosmotic and pressure driven flow and could safely be neglected in other cases. It is observed that the physical properties variation lead to a higher mean velocity in case of pressure assisted flow and a lower mean velocity in case of pressure opposed flow. Furthermore, the... 

In this study the effect of deposition temperature and thickness on the physical properties of carbon films deposited by magnetron sputtering PVD was investigated. The results of Raman spectra and grazing incidence XRD (GIXRD) patterns show that the graphitization increases by increasing the deposition temperature. There is a change in deposition mechanism at 400 °C from amorphous carbon deposition to nano-structured graphite deposition. Also by increasing substrate temperature the electrical resistance of carbon films reduces significantly up to 300 °C and then remains largely constant. High intrinsic compressive stress in low temperature deposited carbon films causes cracks and... 

This study presents a comprehensive investigation on hydrodynamic and thermal transport properties of mixed electroosmotically and pressure driven flow in microtubes. Particular emphasis is given to investigating the combined consequences of viscous dissipation, non-uniform Joule heating, and variable thermophysical properties. Analytical solutions are obtained using the Debye-Hückel linearization and constant fluid properties assumption, while a numerical solution is presented for variable fluid properties and non-uniform distribution of Joule heating. The results indicate that, viscous heating effect is pronounced significantly when a favorable pressure gradient exists and cannot be... 

The welding of nanostructured low carbon steel sheets produced by severe plastic deformation (SPD) has been considered in the present paper. Constrained groove pressing (CGP) method is used for imposing the severe plastic deformation to the steel sheets as a large pre-strain. The SPDed sheets are joined using resistance spot welding (RSW) process. The results show that severe plastic deformation can effectively increase the electrical resistivity of steel sheets; therefore it can affect the microstructure and mechanical properties of spot welds. Microstructure and mechanical properties of fusion zone, heat affected zone (HAZ), recrystallized zone and base metal of SPDed sheets are... 

In this paper, structural and electrical transport properties of hexagonal, 4H-type, BaRu1-xMnxO3 (x=0-0.3), synthesized by the solid-state reaction method at ambient pressure, have been presented. Electrical transport properties are measured over a temperature range of 10300 K in the magnetic field up to 15 kOe. The low temperature resistivity (10K