Sharif Digital Repository

In this study, the effect of submerged vanes on the bed scouring and deposition pattern at a 90̊ open-channel junction was investigated. First, the bed formation without submerged vanes were studied under the effect of hydraulic variables like the discharge ratio of tributary to main channel and the ratio of mean approach velocity to the threshold velocity. The results show that scour holes enlarge with time while they move towards the downstream and the outer wall in the main channel. Also, by increasing the ratio of mean approach velocity to the threshold velocity about 0.5, the maximum scour depth occurred at the downstream junction corner with time. In the second stage, the proper vane... 

In this study, the effect of submerged vanes on the bed erosion pattern at a 90° open-channel junction has been evaluated experimentally. In this study, 41 tests have been conducted in four different steps. In each test, the bed surface level has been measured at the end of 1st, 2nd and 24th hour. In the first step, the preliminary tests have been conducted. In this step, six different formations of submerged vanes have been selected and their performance has been evaluated and the most efficient formation, in the field of maximum scour depth reduction, has been selected. In the second step, six different formations of submerged vanes have been selected and their performance has been... 

Sand production is a phenomenon of producing solid particles together with the reservoir fluid. Material degradation is a key process leading to sanding. Drilling operation, cyclic effects of shut-in and start-up, operational conditions and reservoir pressure depletion may gradually lead to sandstone degradation around perforations and boreholes. Sand production is a major issue and has an adverse impact on production cost that gas and petroleum industry have faced for decades. Corrosion of the pipelines and surface facilities, sand-oil separation cost, repeated shut-in and clean-up of the wellbore are some of the examples. On the other hand, a controlled sanding could be beneficial in... 

Formation damage in oil and gas wells is mainly induced by drilling operations. Filtrate and particle invasion into formation as the sources of this damage caused serious problems, e.g. reduction of production rates. Therefore numerical modeling of this phenomenon helps us to better understand the process, and as a result, control and reduce formation damage associated with this impairment. In this research, a model to estimate the invasion depth and damage of mud filtrate from water-based mud is presented. Filtrate invasion into the formation is investigated by convection-diffusion equation with regard to dispersion term. The invasion depth is obtained from mud filtrate profile in the... 

Fiber Reinforced Polymer (FRP) tendons are suitable to be used in concrete beams exposed to aggressive environments. This study proceeds the design and it presents the flexural capacity (in relation to the moment-curvature) for composite sections (reinforced with steel bars and pre-stressed FRP) rectangular, T-section which has been bent and broken. The failure is in attending with strain softening, stress hardening of fiber reinforced concrete (FRC) and reinforcing with steel bars and polymer. Using the predicted moment-curvature relationship, a numerical method is used to estimate the load deflection response at sample beams under concentrated and uniform loads. A parametric study will be... 

Construction of some structures including parks, bridges and leading walls conducted on the rivers in urbanization leads to the change in the form of the rivers and consequently the change in the hydraulic.The response of river to these changes which are in the form of changes in morphologic features seems to pose some threats such as flood, damage to the buildings located on the route, weakening the bridge of highways and aggradation and degradation of the ecosystem. Kan river, one of the biggest urban rivers in the mega city of tehran, has had some changes such as resort purposes, canalization, the change of slip and roughness and intersection with different bridges during recent... 

understanding basin’s sediment transportation forms and river’s bed erosion in next years in addition to rivers’ response to watershed upstream activities, gives useful information to relevant experts for fundamental studies on expanding of development projects in neighborhood of kan River. This project is an effort to assess the amount of sediment production of Kan River’s basin using SWAT, modeling calibration by using measured data with SWAT-CUP and also prediction of river’s response to watershed activities in modeling river’s sediment in next years by using HEC-RAS. Several management approaches in different scenarios has been studied in order to control the sediment production and... 

In past few centuries , dams have been always a crucial part of human life . Using dams for agriculture and supplying water for people , has made them a valuable asset for countries . So evaluating dam safety and dam breach properties is so important. This issue is a geotechnical , structural and hydrological matter. Safety of earth dams could be threatened due to dam body breach caused by overtopping or pipping, during heavy floods, strong ground motions or any structural damage or defection. As in previous studies , calculating the final geometrical breach properties and time of failure was the main goal , we tried to connect this characteristics and find the relation of time and breach... 

Nanolaunchers are launch vehicles capable of carring light payloads (under 50 kg) to Low Earth orbit and received much attention in the few past years. Launching the nanosatellites grown about 30 times from 2008 to 2017. Since this category of launch vehicles has fewer developing costs and lower thechnology level, they fit developing space technology in our country. Conversely, the demand of high propellant mass fraction and specific impulse may be a serious difficulty to attain this technology.The only operating nanolauncher in the world is SS-520-5 which belongs to Japan and is a three-stage solid propellant launcher. The goal of this project is also the conceptual design and feasiblity...