Sharif Digital Repository

Chondroitinase ABCI (cABCI) is a drug enzyme that can be used to treat spinal cord injuries. Due to low thermal stability of cABCI, this enzyme was immobilized on Fe3O4 nanoparticle to increase its thermal stability. The size and morphology, structure and magnetic property of the Fe3O4 nanoparticles were characterized by the analyses of SEM, XRD and VSM, respectively, and FTIR spectroscopy was employed to confirm the immobilization of cABCI on the surface of Fe3O4 nanoparticles. The results indicated that the optimum conditions for pH, temperature, cABCI-to-Fe3O4 mass ratio and incubation time in immobilization process were 6.5, 15 °C, 0.75 and 4.5 h, respectively, and about 0.037 mg cABCI... 

Among polymers, polyaniline (PANi) has been introduced as a good candidate for muscle regeneration due to high conductivity and also biocompatibility. Herein, for the first time, we report the use of electrospun nanofibrous membrane of PAN-PANi as efficient scaffold for muscle regeneration. The prepared PAN-PANi electrospun nanofibrous membrane was characterized by scanning electron microscopy (SEM), Attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR) and tensile examination. The softer scaffolds of non-composite electrospun nanofibrous PAN govern a higher rate of cell growth in spite of lower differentiation value. On the other hand, PAN-PANi electrospun... 

The current study revealed the effectiveness of polypropylene (PP) fibers and cement to enhance the strength of black cotton soil. PP fibers and cement with different concentrations were mixed with black cotton soil. The strength of PP fiber and cement-based soil samples was measured in terms of unconfined compressive strength (UCS) and California Bearing ratio (CBR). Specimens for UCS and CBR tests were prepared at 2%, 4%, 6% and 8% of cement (by dry weight of soil) and seven percentages of polypropylene fibers i.e. 0.0%, 0.1%, 0.2%, 0.3%, 0.4%, 0.5% and 0.6% (by dry weight of soil). Fourier transform infrared (FTIR) analysis confirmed the presence of polypropylene and cement contents in... 

Betaine-based natural deep eutectic solvents (NADESs), a new class of green solvents, were immobilized into a porous polyvinylidene fluoride (PVDF) support and evaluated for the separation of CO2 from CO2/N2 and CO2/CH4 mixtures. Two types of NADESs were synthesized by mixing betaine (hydrogen bond acceptor-HBA) with malic acid and tartaric acid (hydrogen bond donors-HBD) respectively. FTIR and Raman spectroscopy were studied to confirm the synthesis and purity of the NADESs. The thermal strength of the NADESs was investigated using thermogravimetric analysis. The gas permeation results of the fabricated NADES-based-supported liquid membranes (NADES-SLMs) showed that the permeability of CO2... 

Gadolinium (Gd) and cobalt (Co) substituted Sr–Ba–Cu-based Y-type hexaferrites were synthesized with the help of the sol–gel auto-combustion route. XRD (X-ray diffraction) analysis was done to ratify the phase formation of hexaferrites. The impact of Gd3+ substitutions was measured on all the lattice parameters. Lattice constants “a” and “c” were found between 5.879–5.891 Å and 43.185–43.620 Å, respectively. It was observed from the XRD analysis that with an increase in Gd–Co contents, the enhancement in the average crystallite size is noted. The thermal decomposition process was studied using TGA (thermogravimetric analysis), revealing that the precursor may give the ending product when... 

The current study revealed the effectiveness of polypropylene (PP) fibers and cement to enhance the strength of black cotton soil. PP fibers and cement with different concentrations were mixed with black cotton soil. The strength of PP fiber and cement-based soil samples was measured in terms of unconfined compressive strength (UCS) and California Bearing ratio (CBR). Specimens for UCS and CBR tests were prepared at 2%, 4%, 6% and 8% of cement (by dry weight of soil) and seven percentages of polypropylene fibers i.e. 0.0%, 0.1%, 0.2%, 0.3%, 0.4%, 0.5% and 0.6% (by dry weight of soil). Fourier transform infrared (FTIR) analysis confirmed the presence of polypropylene and cement contents in... 

Selective catalytic reduction (SCR) of NOx by NH3 over a series of Mn–M/Z catalysts (M = Cr, Mn, Fe, Co, Ni, Cu, Zn, and Z = the ZSM-5 Zeolite) synthesized by wet impregnation method was investigated. Mn–Fe/Z, Mn–Co/Z, and Mn–Cu/Z catalysts exhibited approximately 100 % NOx conversion over a wide temperature range (200–360 °C) in a defined atmospheric condition, which was noticeably greater than that of Mn–Cr/Z (340–360 °C). Furthermore, the effect of addition of second metal oxide species to the initial Mn/Z catalyst on the structure of catalysts was studied by several characterization techniques. BET measurements revealed high surface area and pore volume of the Mn–Cu/Z catalyst. In... 

The excellent photoluminescent properties of Fe3O4-graphene quantum dots (Fe3O4/GQD) nanoparticles prepared at 30 and 90 °C have made them as promising optical probes for imaging. Herein, the cytotoxicity of GQD and Fe3O4/GQD nanoparticles in L929 cells was investigated using MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium Bromide] assay. The cellular apoptosis or necrosis was then evaluated by flow cytometry analysis. The Fe3O4/GQD nanoparticles were characterized by transmission electron microscopy (TEM), Raman spectroscopy (Raman), Fourier-transform infrared spectroscopy (FT-IR), photoluminescence (PL). Characterization results obtained, clearly show that Fe3O4/GQD nanoparticles... 

The principal intention of this work is to fabricate and characterize the polyamide/chitosan nanocomposite by a novel single solvent method through the electrospinning procedure. The thermal properties and morphology of prepared nanocomposite are studied by thermogravimetric analysis (TGA) and field-emission scanning electron microscopy (FE-SEM). TGA exposed that the primary decomposition temperature is reduced with rising of chitosan content in the nanocomposites and origin disintegration temperature for polyamide/chitosan nanocomposites is perceived to be in the range from 300 to 500 °C. Also, FE-SEM images demonstrated that the nanofibers of chitosan have good adhesion on the matrix and... 

Co2+ and Cr3+-substituted SrBaCu2-xCoxCryFe28-yO46 X-type hexaferrite with x = y = 0, 0.1 to 0.5 (step = 0.1) were prepared through auto-combustion sol–gel method and sintered at 1250 °C for 5 h which was found from thermal analysis. The thermal investigation, phase detection, spectral, magnetic, and dielectric characteristics of the prepared composition were investigated by TGA, XRD, FTIR, VSM, and dielectric measurement. XRD patterns of the entire composition confirmed the development of a single phase of X-type structure. The enhancement in the lattice parameters and cell volume was observed by varying the Co–Cr concentration, attributed to the larger ionic radii substitution. FTIRspectra... 

The principal intention of this work is to fabricate and characterize the polyamide/chitosan nanocomposite by a novel single solvent method through the electrospinning procedure. The thermal properties and morphology of prepared nanocomposite are studied by thermogravimetric analysis (TGA) and field-emission scanning electron microscopy (FE-SEM). TGA exposed that the primary decomposition temperature is reduced with rising of chitosan content in the nanocomposites and origin disintegration temperature for polyamide/chitosan nanocomposites is perceived to be in the range from 300 to 500 °C. Also, FE-SEM images demonstrated that the nanofibers of chitosan have good adhesion on the matrix and... 

The current work deals with modification of the surface of a silica-polyamine with amine-based ionic liquid (IL) and its application for removal of Cu2+ from an aqueous media. The absorbent is simply prepared from commercially available reagents. The material is characterized by FT-IR spectroscopy, thermogravimetric analysis (TGA), N2 adsorption-desorption, and transmission electronic microscopy (TEM). Effects of several parameters on absorption efficiency, as well as activity of the absorbent to other metals, are also investigated. Moreover, the reusability of the absorbent is studied at the optimized condition. © The Royal Society of Chemistry 2016  

An easily synthesized fluorescent probe for detecting copper in aqueous samples, with a short response time and at neutral pH, has been investigated. Through the chelation of Cu2+ ions or by binding to CuO nanoparticles, the fluorescence emission of the 2-(aminomethyl)aniline derivative H2L is quenched by over 50%. Spectroscopic determination of the association constants of H2L with some metal ions showed that the ligand has a higher affinity toward Cu2+ than toward other d-block metal ions. The comparative bonding ability of the aniline-based fluorescent probe in d-block metal complexes was studied in solution by a combination of UV-Vis, 1H NMR and mass spectrometry analyses. Besides these,... 

Hydroxyapatite nanorods aligned with ultrahigh crystallinity and high-yield were successfully synthesized through a hydrothermal approach. In this experiment, a new composition of cetyltrimethylammonium bromide ((CH 3(CH2)15N+(CH3) 3Br-) was designated as CTAP)/Ca(NO3) 2/ (NH4)2HPO4/NaOH and distilled water under hydrothermal condition, to synthesize single crystal HAp nanorods with diameter of 20 ± 10 nm and length of 80 ± 20 nm, was introduced. Crystal phases were determined by X-ray diffraction (XRD). Scanning electron microscope (SEM) was applied to investigate the morphology. The microstructure of the HAp products were further observed by transmission electron microscope (TEM) and high... 

Metal organic frameworks (MOFs) UiO-66 (UiO stands for University of Oslo) and NH2-UiO-66 were prepared and characterized as sorbent (antidotal agents) for curcumin (CUR) adsorption. The structure of products were characterized by X-ray powder diffraction (XRD), Field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), Attenuated Total Reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and N2 adsorption–desorption measurements. FESEM showed NH2-UiO-66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size distribution. Adsorption capacities of CUR/MOFs with different mass ratios... 

In present work, first, the water-stable metal–organic framework (MOF) nanocrystals, UiO-66-(F)4, were synthesized under green reaction condition and then some PES/PA thin-film nanocomposite (TFN) membranes were prepared using this synthesized nanocrystals (as modifier) and polyethersulfone (as the substrate). The obtained MOF and membranes were characterized by various characterization techniques such as FE-SEM, AFM, PXRD, contact angle measurements and FT-IR spectroscopy. Finally, the forward osmosis performance of the resultant membranes was evaluated by using different concentrations of NaCl as a draw solution and deionized water as a feed solution. Among all used membranes, the membrane... 

In this research, surface modification of aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes was carried out using dielectric barrier discharge (DBD) plasma treatment to improve the performance and fouling resistance of prepared RO membranes. First, polyamide TFC RO membranes were synthesized via interfacial polymerization of m-phenylenediamine and trimesoyl chloride monomers over microporous polysulfone support membrane. Next, the DBD plasma treatment with 15 s, 30 s, 60 s, and 90 s duration was used for surface modification. The surface properties of RO membranes were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR),... 

In this research, surface modification of aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes was carried out using dielectric barrier discharge (DBD) plasma treatment to improve the performance and fouling resistance of prepared RO membranes. First, polyamide TFC RO membranes were synthesized via interfacial polymerization of m-phenylenediamine and trimesoyl chloride monomers over microporous polysulfone support membrane. Next, the DBD plasma treatment with 15 s, 30 s, 60 s, and 90 s duration was used for surface modification. The surface properties of RO membranes were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR),... 

Room temperature gas sensing behavior of arrayed one-dimensional (1D) nickel nanowires (Ni NWs) are investigated using impedance spectroscopy. Ni nanowires synthesized via electrochemical deposition method based on anodic aluminum oxide (AAO) templates. Their structural characterization verified by scanning electron microscopy (SEM), x-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR) analysis. Impedance spectroscopy as an essential technique utilized to understand the mechanism of gas interaction with the wires through the changes in their electronic behavior. Bode and Nyquist plots with the real and imaginary impedances are plotted versus frequency range of 500 Hz... 

The bidentate carboxamide ligand N-(thiazole-2-yl) picolinamide (LH) was synthesized in the environmentally friendly ionic liquid TBAB, and the five-coordinated CuII-complex, [Cu(L)2(H2O)].CHCl3 (1) was synthesized from LH and copper(II)acetate. Cupric oxide [CuO] nanoparticles (2) have been prepared by the thermal decomposition of (1) as a new precursor at 600 °C for 3 h under air atmosphere. (1) was characterised using FT-IR spectroscopy, elemental analyses and its solid state structure was confirmed by single crystal X-ray diffraction. (2) were identified by FT-IR spectroscopy, X-ray powder diffraction, scanning electron microscopy, energy dispersive X-ray analysis and thermo-gravimetric...