Sharif Digital Repository

Gas pressure reduction stations are essential in energy distribution networks because even a minor failure of these systems causes disruptive consumer problems. This study aims to introduce and implement a new knowledge-based platform that uses the synthesized expert's opinions to improve gas pressure control facilities. Given the record of failure of gas transmission system components and the data's uncertain nature, a new fuzzy expert system is developed that takes advantage of the object-oriented programming paradigm to analyze failure modes and conditions. The artificial intelligent model is designed in C# programming language, and a user-friendly interface is developed for ease of... 

For traditional calculations of relative phase permeability (Kr) from coreflood Steady-State Test (SST), the capillary pressure (Pc) is required. Usually, Pc is determined from a separate test, using a centrifuge or porous-plate methods. However, during SSTs, water cut and pressure drop are measured during the transition period between two sequential fractional-flow steps. We developed a novel method for simultaneous determination of Kr and Pc from SST by using both steady-state and transient data. In the proposed method, the transition data on the pressure drop across the core are used instead of the traditionally utilised Pc-curve. The main idea is that the stabilisation period during each... 

Well-known polars in classical shock wave theory, that is, flow deflection angle-shock angle (θ-β), hodograph (u*,v*), and pressure deflection (θ-P*) diagrams, are investigated for the rarefied gas flows using a recently proposed shock wave detection technique by Akhlaghi and coworkers. The agreement between the obtained polars with the analytical relations in classical shock wave theory has been shown in the continuum limit for the cases of supersonic flow over the wedge and cylinder geometries. Investigations are performed using the RGS2D direct simulation Monte Carlo solver for supersonic gas flows over a circular cylinder at continuum limit and Kn = 10-4, 10-3, 0.01, 0.03, 0.07, and... 

Well-known polars in classical shock wave theory, that is, flow deflection angle-shock angle (θ-β), hodograph (u*,v*), and pressure deflection (θ-P*) diagrams, are investigated for the rarefied gas flows using a recently proposed shock wave detection technique by Akhlaghi and coworkers. The agreement between the obtained polars with the analytical relations in classical shock wave theory has been shown in the continuum limit for the cases of supersonic flow over the wedge and cylinder geometries. Investigations are performed using the RGS2D direct simulation Monte Carlo solver for supersonic gas flows over a circular cylinder at continuum limit and Kn = 10-4, 10-3, 0.01, 0.03, 0.07, and... 

The performance of a gas centrifuge that is used for isotopes separation is dependent on the gas flow inside it. In this study, for modeling the UF6 gas flow, an Implicit Coupled Density-Based (ICDB) solver, was developed in OpenFOAM. To validate the ICDB solver, the gas flow within the rotor in total reflux state was compared with the analytical solution obtained by Onsager model and the numerical solution obtained by the Fluent software. The results showed that the ICDB solver had acceptable accuracy and validity. Also the computational efficiency of Roe, AUSM (Advection Upstream Splitting Method) and AUSM+ up schemes were compared. The results showed AUSM+ up scheme is efficient. Then,... 

UF6 gas flow in the total regions of a rotor with the radius of 0.1 m and the length of 1 m in axisymmetric and steady states was simulated using a new hybrid CFD-DSMC method in the OpenFOAM framework. Implicit coupled density-based scheme was performed for CFD method, and Variable Hard Sphere (VHS) and diffuse model were employed in DSMC method. Also, as an initial estimation, the local Knudsen number was applied to determine the interface location between the continuum-rarefied regions (r = 0.0855 m). Then it was modified (r = 0.084 m) to reduce the computational cost. The comparison results of pure CFD and CFD-DSMC methods illustrated that there were large differences between the flow... 

Due to the widespread use of rarefied gas flow in micro-porous media in industrial and engineering problems, a pore-scale modeling of rarefied gas flow through two micro-porous media with fractal geometries is presented, using lattice Boltzmann method. For this purpose, square- and circular-based Sierpinski carpets with fractal geometries are selected due to their inherent behavior for real porous media. Diffusive reflection slip model is used and developed for these porous media through this study. With this respect, the planar Poiseuille flow is selected as a benchmark and validated with the literature. The effect of Knudsen number (Kn) on the permeability is investigated and compared in... 

Due to the widespread use of rarefied gas flow in micro-porous media in industrial and engineering problems, a pore-scale modeling of rarefied gas flow through two micro-porous media with fractal geometries is presented, using lattice Boltzmann method. For this purpose, square- and circular-based Sierpinski carpets with fractal geometries are selected due to their inherent behavior for real porous media. Diffusive reflection slip model is used and developed for these porous media through this study. With this respect, the planar Poiseuille flow is selected as a benchmark and validated with the literature. The effect of Knudsen number (Kn) on the permeability is investigated and compared in... 

Gas permeation through nanoscale pores is ubiquitous in nature and has an important role in many technologies 1,2 . Because the pore size is typically smaller than the mean free path of gas molecules, the flow of the gas molecules is conventionally described by Knudsen theory, which assumes diffuse reflection (random-angle scattering) at confining walls 3-7 . This assumption holds surprisingly well in experiments, with only a few cases of partially specular (mirror-like) reflection known 5,8-11 . Here we report gas transport through ångström-scale channels with atomically flat walls 12,13 and show that surface scattering can be either diffuse or specular, depending on the fine details of the... 

In recent years, application of porous media is highlighted among researchers due to their wide range of usability in micro-scale problems, such as gas reservoirs, micro-filtering, heat exchangers, etc. With this respect, the accurate description of flow behavior using governing equations based on the continuum assumption is not valid since the mean free path is comparable to the characteristics length of the problem. For this purpose, a simple methodology for diffusion reflection boundary condition is developed and validated for two valuable benchmarks, namely micro-channel flow and fractal porous media, where the results were in good agreement with literature. Then, pore-scale simulation... 

Reaction thrusters (RTs) are used as an alternative to momentum exchange devices when disturbance torques exceed the control authority of momentum exchange devices. The reaction control system (RCS) can employ some rocket thrusters to provide attitude control during the thrusting or coast phase. Within the control loop, the RCS's target could be either achieving and keeping a certain attitude or controlling the rate of an attitude change. In the coast phase, some tasks such as preacceleration, settling of liquid propellant, damping of structural vibrations, providing a velocity increment to separate stages and payloads, and carrying out orbital and nonorbital maneuvers may be included in its... 

In this work, desalination of saline brines using the sweeping gas membrane distillation (SGMD) process is investigated. The Taguchi method was applied for optimization of the operating parameters. An L9 orthogonal array was used to investigate the influence of pertinent variables, including feed temperature (Tf: 45°C, 55°C and 65°C), feed flow rate (Qf: 200, 400 and 600 mL/min), feed concentration (Cf: 10, 25 and 50 g/L) and sweeping gas flow rate (Qc: 4, 10, and 16 SCFH) on the distillate flux. Results of the experiments showed that maximum distillate flux, which was about 10 L/m2 h, obtained at 65°C feed temperature, 16 SCFH sweeping gas flow rate and brackish water with 10 g/L salt... 

This paper introduces a shock-wave-detection technique based on the schlieren imaging for continuum and rarefied-gas flows. The scheme is applicable for any existing two-dimensional flowfields obtained by experimental or numerical approaches. A Gaussian distribution for a schlieren function within the shock-wave region is considered. This enables the authors to access any desired locations through the shock (e.g., shock center, or leading- and trailing-edge locations). The bow shock-wave profile is described via a rational function, which could be employed for the estimation of shock angle. The relation between pre- and postshock flow properties along the shock wave with a high resolution... 

In this study the effects of melt temperature and flow rate of cooling gas on the characteristics of silver nanoparticles have been studied. Transmission electron microscopy and dynamic light scattering techniques have been employed to monitor morphology and particle size of the product. Measurements reveal that higher melt temperatures and higher cooling gas flow rates can decrease particle size. Silver nanoparticles with an average particle size of 35 nm and specific surface of 18.489 m2/g have been obtained at a melt temperature of 1,130 °C with argon flow rate of 20 liters per minute  

Epitaxial cerium oxide (CeO2) buffer layer has been grown on lanthanum aluminate (LAO) single crystal substrates for fabrication of c-axis oriented YBa2Cu3O7-x (YBCO). Precursor solution of cerium acetylacetonates with viscosity of 0.6 centipoises was spin coated on the 1×1 cm area LAO substrates. The calcination was carried out by very slow ramp (1°C per minute) until the final temperature of 500°C in oxygen flow to remove most of the organic compounds. The final heat treatment has been done at 780°C by a ramp of 20° per minute in gas flow of mixed argon-oxygen with 5 Pa partial pressure of oxygen. The thickness of the deposited CeO2 buffer layer was 20 nm. Then, 100 nm thick YBCO film was... 

Analytical solution of shock wave propagation in pure gas in a shock tube is usually addressed in gas dynamics. However, such a solution for granular media is complex due to the inclusion of parameters relating to particles configuration within the medium, which affect the balance equations. In this article, an analytical solution for isothermal shock wave propagation in an isotropic homogenous rigid granular material is presented, and a closed-form solution is obtained for the case of weak shock waves. Fluid mass and momentum equations are first written in wave and (mathematical) non-conservation forms. Afterwards by redefining the sound speed of the gas flowing inside the pores, an... 

In this paper, an axial dispersion mathematical model is developed to simulate a three-phase slurry bubble column reactor for direct synthesis of dimethyl ether (DME) from syngas. This large-scale reactor is modeled using mass and energy balances, catalyst sedimentation and single-bubble as well as two-bubbles class flow hydrodynamics. A comparison between the two hydrodynamic models through pilot plant experimental data from the literature shows that heterogeneous two-bubbles flow model is in better agreement with the experimental data than homogeneous single-bubble gas flow model. Also, by investigating the heterogeneous gas flow and axial dispersion model for small bubbles as well as the... 

The ZnO nanowires have been synthesized using vapor-liquid-solid (VLS) process on Au catalyst thin film deposited on different substrates including Si(1 0 0), epi-Si(1 0 0), quartz and alumina. The influence of surface roughness of different substrates and two different environments (Ar + H2 and N2) on formation of ZnO nanostructures was investigated. According to AFM observations, the degree of surface roughness of the different substrates is an important factor to form Au islands for growing ZnO nanostructures (nanowires and nanobelts) with different diameters and lengths. Si substrate (without epi-taxy layer) was found that is the best substrate among Si (with epi-taxy layer), alumina and... 

In this study, we simulate rarefied gas flow through a confined nano-impinging jet using direct simulation Monte Carlo (DSMC) method. The effects of geometrical parameters, pressure ratio, and wall conditions on the heat transfer from a hot surface are examined. Hot surface modeled via diffusive constant wall temperature. Various inlet/confining surface conditions such as specular, adiabatic, and constant temperature are implemented and the effects of them on the wall heat flux rates are studied. The results show that Knudsen number, velocity slip, and temperature jump are main reasons which specify magnitudes of wall heat flux rates. Among all geometrical parameters, H/W ratio has the... 

The present investigation is devoted to the second law of thermodynamics analysis of steady-state hydrodynamically and thermally fully developed laminar gasflow in a microannulus with constant but different wall heat fluxes. Slip velocity and temperature jump boundary conditions are usedtodescribe rarefaction effects. Viscous heating is also included for both the wall cooling and heating cases. Using already available velocity profile, closedform expressions are obtained for the transverse distribution of temperature and entropy generation rates. The results demonstrate that the effectof the wall heatfluxes ratioonentropy generation is negligible atlarge valuesofthe group parameter and...