Sharif Digital Repository

Electric vehicles and electronics such as laptops and smartphones require an efficient amount of energy conversion and storage. As one of the reliable systems in this field, lithium-ion batteries have high energy density and lower emissions. Cathodic material is a bottleneck in the development of lithium-ion systems due to its high cost and limited energy capacity. In this study, lithium-rich oxide cathode was synthesized in the liquid phase using the co-precipitation synthesis method using six-aqueous nickel nitrate and four-aqueous manganese chloride precursors. The material was analyzed by structural characterization analysis as well as electrochemical characterizations. In this project,... 

One of the basic resources for lithium extraction is brine which is very abundance in Iran. It is important to characterize these brines and their compositions to select a suitable method for lithium recovery from them. By investigation of the local brines and determining lithium and other alkali metals composition in them, the ion exchange process using titanium dioxide ion-sieve with nanotube morphology is suggested as highly effective method for lithium extraction from Iranian brines. Due to high advantages of hydrothermal process, TiO2 nanotubes were produced by this method and the optimum parameters of hydrothermal reactions were reported. In this way, hydrogen titanate nanotubes with... 

Batteries have always been used as one of the most important sources of electricity storage and supply. Among different types of batteries, lithium-ion batteries are widely used in various fields and engineering applications due to their high-density energy/power, high discharge/charge rate, and long life. The most common of these applications are using these batteries in all-electric and hybrid vehicles, which reduce environmental problems. Due to the high cost of these types of batteries and the environmental issues of battery decomposition, researchers are seeking to discover long-lasting batteries that lithium titanate oxide batteries have the most extended lifespan among lithium-ion... 

Today, considering the global demand for reducing greenhouse gas emissions, rechargeable batteries are considered as a source of energy in electric vehicles, hybrid electric vehicles and smart grids. In all these applications for secondary batteries, the battery management system requires an accurate estimate state of charge of each cell. However, this estimate is difficult particularly for battery aging. In this study, a lithium-ion battery is modeled by using multidimensional multiphysics modeling and simulated in a comsol. In this simulation, the effect of the thermal conductivity coefficient on the battery temperature, initial salt concentration in electrolyte and the rate of discharge... 

In Li-ion batteries, large volume changes of electrodes with high capacity, such as silicon electrodes during charging and discharging processes (insertion/extraction of lithium into/from the electrode), lead to restrictions on the use of this type of electrode. Given the very high capacity of silicon, predicting and modeling the behavior of silicon electrodes during electrochemical cycles is important and is also addressed in this thesis. First, using the theory of linear elasticity, relations are proposed that couple the diffusion of particles with small elastic deformation. The effect of hydrostatic stress on diffusion and stresses is investigated in lithiation processes. Then, the... 

Among the various materials, silicon anodes have the highest lithium absorption in lithium-ion batteries. But this high lithium absorption capacity can cause 300 percent volume expansion and large stresses. Experimental observations show that charge and discharge cycles may cause plastic deformation in some parts of the electrode particle. On the other hand, there is a possibility of a ratcheting phenomenon due to changing in elastic properties of the electrode material during the charging and discharging processes. However, this phenomenon has not been reported for silicon spherical electrode particles yet.This study aims to model the elastic-plastic behavior of silicon spherical electrode... 

To ensure stable and optimal operation of lithium-ion batteries (LIBs), it is necessary to use a management system for online monitoring and accurate estimation of battery State of Charge (SOC). Due to LIBs' complex dynamics and effective factors such as temperature and side reactions, battery SOC estimation has become one of the greatest challenges for experts in the field. In this research, an adaptive sliding mode observer has been designed and evaluated for a cylindrical lithium manganese oxide battery with a capacity of 1258 mAh. At first, rigorous simulation of lithium-ion battery has been performed by utilizing the P2D electrochemical as well as thermal and aging model to be the main... 

In Li batteries, lithium ions are exchanged between two electrodes, along with the accompaning electron transfer to maintain riability good ionic conductivities and electrolytes stability are achived through additives to the electrolyte. Such matrial should possess good anions acceptability. This work investigates the potential of aza-ethers in this regard. The softness criteris is basically employed. DFT calculation for selected molecules of different size, substituents and interacting atoms are used to correlate softness, electrophilicity, Fukui no, etc to the usefulness of the corresponding matrials  

Lithium ion battery is one of the innovative and emerging technologies in energy sector that has played a major role in electricity supply security by integration of renewable energy technologies in electrical grid, implementation of electrical transportation system and de-carbonation of the both sectors in recent years. On the other hand, the formation of the potential market of technology as one of the functions of the technological innovation system plays an essential role in creation and advancement of innovation in the energy sector. Therefore, in this thesis, the development of lithium ion battery technology in Iran has been investigated from the perspective of the technology market in... 

Although much progress has been made in eliminating, conserving, and reducing migration and emissions of radioactive materials, the risk of radioactive material release into the environment is still one of the most important hazards in the use of nuclear energy. In this study, graphene compounds have been used as adsorbents for the removal of radioactive materials due to their high level, cost-effectiveness and simplicity of the synthesis process of various composites. In this regard, the removal of strontium and cobalt by graphene compounds has been investigated. Magnetite nanoparticles were anchored on the surface of graphene by sol-gel method and adsorption in batch mode was investigated.... 

Li7La3Zr2O12 (LLZO) solid-state electrolyte is a very promising electrolyte for a variety of ion lithium solid-state batteries, due to high conductivity of Li ions at room temperature as well as its chemical stability with Li metal anode. LLZO phase has two tetragonal and cubic symmetries. The conductivity of the cubic phase is two times higher than that for the tetragonal phase. To stabilize the cubic phase at room temperature, 0.2, 0.25, and 0.3 mol% Aluminum was doped to LLZO solid-state electrolyte. This powder was synthesized by sol-gel combustion method at 1000˚C. The cubic phase and lack of impurity of the samples doped with 0.25 and 0.3% Aluminum were determined by X-ray Diffraction... 

Titanium nitride-carbon nanocomposites are synthesized by the reaction of TiCl4 and NaN3 in supercritical benzene medium that also serves as a carbon source. In order to improve the crystallinity of the as-prepared precursor (SI), it is further heat-treated at 1000 ˚C for 3-10 h using anhydrous ammonia and UHP nitrogen atmospheres at 1000 ˚C (SIII-SV). Moreover, to improve electrochemical behavior, the synthesized nanocomposite (SIV) is modified with Pt nanoparticles using a polyol process. For better understanding of synthesized catalyst nature and justifying their variant ORR activity several analyses are done. X-ray diffraction (XRD), Raman spectrum, field emission scanning electron... 

Novel Copper Oxide microflowers /Polypyrroles nanowire nanocomposites with various wight ratio have been synthesized.The synthesized CuO/Ppy NCs and Cuo microflowers are characterized by XRD, FT-IR, TGA, FESEM and EDX line analysis/elemntal mapping. The formation mechanism of CuO microflower and Ppy nanowires are also well explained.All syntesized samples have been used as as anode material for li-ion batteries in order to measure their electochemical lithium-ion storage properties. It is demonstrated that presence of Ppy nanowire with different weight ratio plays important role in lithium-storage properties of the hybrid CuO/Ppy NCs. With increase in the mass ratio of Ppy nanowire cyclic... 

Due to the technology advancement and the large-scale application of lithium-ion batteries in recent years, the market demand for lithium is growing rapidly and the availability of land lithium resources is decreasing significantly. As such, the focus of lithium extraction technologies has shifted to water lithium resources involving salt-lake brines and sea water. The ion exchange process is a promising method for lithium extraction from brine and seawater having low concentrations of this element. Among various aqueous recovery technologies, the lithium ion-sieve (LIS) technology is considered the most promising one. This is because LISs are excellent adsorbents with high lithium uptake... 

In the current century, an energy storage is one of the critical and important factors affecting on human life. Rechargeable batteries, specially Lithium ion batteries (LIBs), can be considered as ideal energy storage devices including various advantages e.g. high energy and power densities. In this work, Tin IV sulfide (SnS2) and its composites, making by conductive materials e.g. Reduced Graphene Oxide (SnS2@rGO), are prepared during two different synthesis methods consisting of Hydrothermal and Hot-bath, and their properties are investigated as anode material in LIB. The structural and electrochemical analyses demonstrated that the composite sample prepared by hot-bath method exhibited... 

In this research, we study and optimize the inverted perovskite solar cells (PSCs) using nano layers of NiOx and Li:NiOx as hole transporting layers (HTLs) and nano layers of PC70BM and C60 as electron transporting layers (ETLs). We fabricated inverted PSCs with three different HTLs, namely MoOx, PEDOT:PSS and NiOx, using vapor assisted solution processed (VASP) method for making MAPbI3 perovskite which yielded a power conversion efficiency (PCE) of 1%, 1.93% and 3.65%, respectively. Solution-processed deposition method, high transparency (˃90%) and high band gap (3.9 eV) are the most advantages to use NiOx as HTL in current research. Using lithium as dopant to the NiOx increases the... 

Polymer electrolytes are most frequently used electrolytes especially in lithium ion batteries. The gel-polymer and polymer-ceramic electrolytes were synthesized using DMA plasticizer, LiClO4, and SiO2 ceramic Nano fillers through coating method. EIS, FTIR, XRD, SEM, and TGA analyses were carried out on electrolytes. The optimum amount of perchlorate and polymer was obtained 0.5 M and 5% w/w, respectively. Also, the optimum amount of silica was obtained 2% w/w. the optimizations were carried out suing conductometry. The EIS analysis showed the ionic conductance of gel-polymer 1.8 mS.cm-1 while that of ceramic-polymer was obtained 2.8 mS.cm-1  

The air cathode of li-air batteries plays a pivotal role in the overall performance of Li-air batteries. Graphene-based cathodes have been investigated as cathode catalysts for lithium-air batteries due to their extraordinary potential for accelerating and facilitating oxygen reduction reaction (ORR).In this study graphene oxide have been synthesized via modified Hummers’ method. Consequently, the as obtained graphene oxide have been reduced using chemical, electrochemical, and hydrothermal methods. Results of elechtrochemical evaluations demonstrate that the graphene oxide reduced via hydrothermal method possesses the most positive ORR onset potential (+0.55V vs SHE) among the other samples... 

In recent years lithium-air batteries captured worldwide attention because of their high energy density. Solid state electrolytes is one of the main components of lithium-air batteries. Lithium almunium titanium phosphate(LATP) is a nasicon type ion conduction which may be of great potential as solid electrolyte. The object of this thesis was the preparation of LATP solid electrolyte which can be used in a lithium-air battery. To reach this goal LATP powder was synthesized using a solution-based method and an appropriate crystallization temperature was selected based on obtained results of X-ray diffraction analysis. In the next step solid electrolytes was prepared under different pressing... 

In this work, butyl methylimidazolium tetrafluoroborate and butyl methylimidazolium hexafluorophosphate are used as ionic liquid and lithium perchlorate and lithium hexafluorophosphate as lithium salt. Dimethyl carbonate and propylene carbonate are used as solvent to prepare diffrent kinds of organic - ionic liquids solvent for lithium ion batterries. In preliminary expriment it was distinguished that in the mixture of organic solvent lithium hexaflourophosphat has more conductivity in comparison with lithium perchlorate. There for,in this work, all organic-ionic liquid solvent electrolytes are considered based on lithium hexaflourophosphat salt. Different compositions of organic-ionic...