Sharif Digital Repository

In this work, asphaltene adsorption in a sandstone core sample under dynamic conditions and during miscible CO2 injection was studied using live oil sample which is close to real conditions in petroleum reservoirs. In order to investigate of damage in sandstone core sample by the deposited material such as asphaltene, the morphology analysis of sandstone core sample using scanning electron microscopic method was studied. Also analyses of the adsorbed material in sandstone core sample by Soxhlet extraction using an azeotrope mixture and with SARA method were performed. The experimental results show that by increasing the flow rate of injected CO2, the amount of asphaltene in retained material... 

In this work, a new model based on multilayer kinetic adsorption mechanism has been proposed to account asphaltene adsorption in porous media under dynamic condition and the model was verified using experimental data obtained in this work and also with those reported in the literature. In the proposed model two steps are considered for asphaltene adsorption. The first step is taken as adsorption of asphaltenes on the surface of the porous media and the second step is taken as adsorption of asphaltenes on the asphaltenes already adsorbed on the porous media. The Crank-Nicholson method, central difference in space and trapezoidal rule in time, giving second order convergence in time was... 

Semiconductor photoelectrodes for water oxidation that absorb visible light usually have poor electronic transport properties and small optical absorption coefficients near their absorption edge. Therefore, innovative designs that lead to significant optical absorption in relatively thin layers of these compounds are highly desirable. Here, using full-field electromagnetic optical simulations, we demonstrate that a monolayer of resonant-size BiVO4 spheres can provide enhancement up to a factor of two in solar light absorption relative to dense planar layers. In this monolayer, BiVO4 spheres do not need to be interconnected; therefore, such monolayers are flexible and their fabrication... 

The screen-printed gold electrode (SPGE) modified with the formation of self-assembly monolayer (SAM) of cysteine (Cys) on gold-nanoparticles (Au nano) was utilized for rapid and simultaneous determination of tetracycline and cefixime antibiotics by square wave voltammetry (SWV). Electrochemical investigation and characterization of the modified electrode was achieved using cyclic voltammetry (CV) and scanning electron microscopy (SEM). A principal component artificial neural network (PCANN) with three layer back-propagation network was utilized for the analysis of the voltammogram data. It is possible to simultaneously determine the tetracycline and cefixime concentrations in the ranges of... 

Core/shell structure of ZnO nanowires coated with a monolayer of TiO 2 is investigated using Density Functional Theory (DFT). The electronic states of the semiconductor is calculated and compared before and after coating of the TiO2 monolayer on a ZnO [101 0] surface. The effect of TiO2 coating induce surface states changes and shifts the conduction and valence band edges to higher energies. Our results, in qualitative agreement with the experimental work of Matt Law et al. (J. Phys. Chem. B, 110, 22652), show an increase in open circuit voltage and a decrease in short circuit current in ZnO/TiO2 core shell dye sensitized solar cells. Regarding the semiconductor density of states (DOS), TiO2... 

One of the most important biological components is lipid nanobio membrane. The lipid membranes of alive cells and their mechanical properties play an important role in biophysical investigations. Some proteins affect the shape and properties of the nanobio membrane while interacting with it. In this study a multiscale approach is experienced: first a 100ns all atom (fine-grained) molecular dynamics simulation is done to investigate the binding of CTX A3, a protein from snake venom, to a phosphatidylcholine lipid bilayer, second, a 5 micro seconds coarse-grained molecular dynamics simulation is carried out to compute the pressure tensor, lateral pressure, surface tension, and first moment of... 

A molecularly imprinted xerogel (MIX) for fentanyl was successfully prepared on the inner surface of a copper tube by sol-gel technology. Primarily, the tube was treated by self-assembly monolayers of 3-(mercaptopropyl) trimethoxysilane and then [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane was employed as a precursor for imprinting the template molecule in acidic conditions. During the sol-gel process influential parameters including volume and concentration of fentanyl were carefully investigated to obtain the most efficient and appropriate xerogel. In parallel, a non-imprinted xerogel (NIX) was synthesized in the absence of fentanyl. The extraction efficiencies achieved from MIX and NIX,... 

Propane dehydrogenation was carried over a commercial Pt-Sn/γ-Al 2O3 catalyst at atmospheric pressure and reaction temperatures of 580, 600, and 620°C and WHSV of 11 h-1 in an experimental tubular quartz reactor. Propane conversions were measured for catalyst time on stream of up to nine days. The amounts of coke deposited on the catalyst were measured after one, three, six, and nine days on stream using a thermogravimetric differential thermal analyzer (TG-DTA) for each reaction temperature. The coke formation kinetics was successfully described by a coke formation model based on a monolayer-multilayer mechanism. In addition, catalyst deactivation was presented by a time-dependant... 

In this work, a new model based on the multilayer adsorption kinetic mechanism and four material balance equations for oil, asphaltene, gas, and water phase has been developed to account for asphaltene deposition in porous media under dynamic conditions and the model was verified using experimental data obtained in this work and also with those reported in the literature. The results showed that the developed model based on multilayer adsorption kinetic mechanism can correlate more accurately the oil flooding experimental data in comparison to the previous models based on the mechanical plugging mechanism, in particular in carbonate core samples. Also, a series of experiments was carried to... 

The lipid membranes of living cells form an integral part of biological systems, and the mechanical properties of these membranes play an important role in biophysical investigations. One interesting problem to be evaluated is the effect of protein insertion in one leaflet of a bilayer on the physical properties of lipid membrane. In the present study, an all atom (fine-grained) molecular dynamics simulation is used to investigate the binding of cytotoxin A3 (CTX A3), a cytotoxin from snake venom, to a phosphatidylcholine lipid bilayer. Then, a 5 ms coarse-grained molecular dynamics simulation is carried out to compute the pressure tensor, lateral pressure, surface tension, and first moment... 

To evaluate the selectivity and efficiency of solid phase microextraction (SPME) fiber coatings, synthesized by sol-gel technology, roles of precursors and coating polymers were extensively investigated. An on-line combination of capillary microextraction (CME) technique and high performance liquid chromatography (HPLC) was set up to perform the investigation. Ten different fiber coatings were synthesized in which five of them contained only the precursor and the rests were prepared using both the precursor and coating polymer. All the coatings were chemically bonded to the inner surface of copper tubes, intended to be used as the CME device and already functionalized by self-assembly... 

In this paper, oil recovery and permeability reduction of a tight sandstone core sample in miscible CO2 flooding processes due to asphaltene deposition were studied using an Iranian bottom hole live oil sample in order to distinguish between the mechanical plugging and adsorption mechanisms of asphaltene involved in the interfacial interaction of the asphaltene/mineral rock system. A novel experimental method was designed and proposed to measure the amount of deposited asphaltene due to different mechanisms using the cyclohexane or toluene reverse flooding and spectrophotometer. In this work, the bottom hole live oil sample was injected first to a long core and then CO 2 injection was... 

We investigate the structure and electronic properties of phosphatidylcholine (PC) under different degrees of hydration at the single-molecule and monolayer type level by linear scaling ab initio calculations. Upon hydration, the phospholipid undergoes drastic long-range conformational rearrangements which lead to a sickle-like ground-state shape. The structural unit of the tilted gel-phase PC appears to be a water-bridged PC dimer. We find that hydration dramatically alters the surface potential, dipole and quadrupole moments of the lipids and consequently guides the interactions of the lipids with other molecules and the communication between cells  

The voltammetric behavior of dopamine (DA) and uric acid (UA) on a gold electrode modified with self-assembled monolayer (SAM) of cysteamine (CA) conjugated with functionalized multiwalled carbon nanotubes (MWCNTs) was investigated. The film modifier of functionalized SAM was characterized by means of scanning electron microscopy (SEM) and also, electrochemical impedance spectroscopy (EIS) using para-hydroquinone (PHQ) as a redox probe. For the binary mixture of DA and UA, the voltammetric signals of these two compounds can be well separated from each other, allowing simultaneous determination of DA and UA. The effect of various experimental parameters on the voltammetric responses of DA and... 

A new technique for preparation of an unbreakable solid-phase microextraction (SPME) fiber, using sol-gel technology is developed. Primarily, an ultrathin two-dimensional intermediate film was prepared by hydrolysis of 3-(trimethoxysilyl)-1-propanthiol self-assembled monolayer grafted onto gold, then a stationary phase by electrodeposition of 3-(trimethoxysilyl) propylmethacrylate as a precursor, tetramethyl orthosilicate and polyethylene glycol as a coating polymer was produced. The scanning electron microscopy images revealed that the new fiber exhibits a rather porous and homogenous surface. The thermal stability of the fabricated fiber was investigated by thermogravimetric analysis. The... 

Carbon nanostructures such as carbon nanotubes (CNTs) and graphene sheets have attracted great attention due to their exceptionally high strength and elastic strain. These extraordinary mechanical properties, however, can be affected by the presence of defects in their structures. When a material contains multiple defects, it is expected that the stress concentration of them superposes if the separation distances of the defects are low, which causes a more reduction of the strength. On the other hand, it is believed that if the defects are far enough such that their affected areas are distinct, their behavior is similar to a material with single defect. In this article, molecular dynamics... 

A new technique is introduced for preparation of an unbreakable fiber using gold wire as a substrate for solid phase microextraction (SPME). A gold wire is used as a solid support, onto which a first film is deposited that consists of a two-dimensional polymer obtained by hydrolysis of a self-assembled monolayer of 3-(trimethoxysilyl)-1-propanthiol. This first film is covered with a layer of 3-(triethoxysilyl)-propylamine. Next, a stationary phase of oxidized multi-walled carbon nanotubes was chemically bound to the surface. The synthetic strategy was verified by Fourier transform infrared spectroscopy and scanning electron microscopy. Thermal stability of new fiber was examined by... 

In this work a novel unbreakable sol-gel-based in-tube device for on-line solid phase microextraction (SPME) was developed. The inner surface of a copper tube, intended to be used as a high performance liquid chromatography (HPLC) loop, was electrodeposited by metallic Cu followed by the self assembled monolayers (SAM) of 3-(mercaptopropyl) trimethoxysilane (3MPTMOS). Then, poly (ethyleneglycol) (PEG) was chemically bonded to the -OH sites of the SAM already covering the inner surface of the copper loop using sol-gel technology. The homogeneity and the porous surface structure of the SAM and sol-gel coatings were examined using the scanning electron microscopy (SEM) and adsorption/desorption... 

Graphene nanoribbon field effect transistors are promising devices for beyond-CMOS nanoelectronics. Graphene is a semiconductor material with zero bandgap and its bandgap must be changed. One of the opening bandgap methods is using graphene nanoribbons. By applying a defect, there is more increase on band gap of monolayer armchair graphene nanoribbon field effect transistor. So, by applying more than one defect, we can reach to much more increase in bandgap of graphene nanoribbon field effect transistors (GNRFET). In this paper, double-gated monolayer armchair graphene nanoribbon field effect transistors (GNRFET) with one single vacancy (1SV) defect (so-called 1SVGNRFET)are simulated and... 

Different structures of TiO2 photoelectrodes were fabricated with various arrangement modes of the layers. TiO2 nanoparticles were synthesized by a combination of sol–gel and solvothermal methods and were employed as the active layer of solar cells. Hierarchical TiO2 spheres (HTS) and spherical TiO2 particles (STP) were also prepared by hydrothermal and sol–gel processes, respectively, and used as the scattering layer of solar cells. Field emission scanning electron microscope and X-ray diffraction analyses revealed that all synthesized morphologies showed anatase structure with particle size around 20, 200–400 nm and 1.5–2.0 µm for the...