Sharif Digital Repository

An exact analysis based on the wave function expansion is carried out to study the scattering of a plane harmonic acoustic wave incident at an arbitrary angle upon an arbitrarily thick helically filament-wound (anisotropic) cylindrical shell submerged in and filled with compressible ideal fluids. Using the laminated approximation method, a modal state equation with variable coefficients is set up in terms of appropriate displacement and stress functions and their cylindrical harmonics to present an analytical solution based on the three-dimensional exact equations of anisotropic elasticity. Taylor's expansion theorem is then employed to obtain the solution to the modal state equation,... 

Determining the shape, area, volume, and direction of flaws using ultrasonic imaging of metallic pieces, is a method estimating the severity of their defects. Different methods are used to process ultrasound images. Among these methods are spectral analyses, statistical, mathematical and intelligent methods. Within each of these, there are some advantages as well as limitations. Prony algorithm, which has been used as a parametric method for extracting exponential components of a signal, has several applications in signal modeling, system identification and classification. In this paper, after simulating pieces of oil pipeline, digital Wavelet transform has been used to reduce the noise of... 

Journal-bearings play a significant role in industrial applications and the necessity of condition monitoring with nondestructive tests is increasing. This paper deals a proper fault detection technique based on power spectral density (PSD) of vibration signals in combination with K-Nearest Neighbor and Support Vector Machine (SVM). The frequency domain vibration signals of an internal combustion engine with three journal-bearing conditions were gained, corresponding to, (i) normal, (ii) corrosion and (iii) excessive wear. The features of the PSD values of vibration signals were extracted using statistical and vibration parameters. The extracted features were used as inputs to the KNN and... 

Crack detection by Piezoelectric Wafer Active Sensors (PWAS) is one of the emerging methods of Non-destructive Evaluation (NDE). These sensors can assess the health state of the structure in far filed through the analyzing the high frequency Lamb wave propagation. As PWAS is the essential part of this method, simulation and modeling of these sensors and their interaction with the host structure, strongly affect the accuracy of results. In this study, unlike the previous works, in which some certain areas of the host structure were considered as a sensor and actuator, the direct simulation of electro-mechanical interaction of the PWAS and the host structure is modeled among modeling the PWAS... 

Defect detection in pipes is an essential task specially for sensitive applications such as oil and gas industry where special cares are required. Corrosion is a common defect in pipes which has attracted attention of researchers. In present work a non-destructive methodology for pipe corrosion monitoring is introduced. Polymer of Vinylidene Fluoride (PVDF) Piezoelectric is used as the sensor to measure strain variations affected by internal corrosion. High sensitivity and low cost of piezoelectric materials made them a good candidate for precise industrial applications. Different corrosion conditions (i.e. corrosion location along pipe and corrosion depth) are modeled and sensors voltages... 

Non-destructive identification of voids in ferromagnetic materials is of great importance for industrial applications. Magnetic flux leakage technique is used here to examine the defected structure. To this end, an inverse problem should be solved in order to infer the location and depth of internal flaws from the measured leaked magnetic signals. Currently generalized inverse method and singular value decomposition are used for solving such inverse problem. Considering the cracks separation has significant effect on the absolute value of magnetic flux leakage signals, we study different distributions of cracks. In this paper, the magnetic dipole model is proposed to reconstruct the extent... 

Incorporating an analytical approach to simulate the interaction of a series of long cracks and the induced current of a double-D excitation coil, we have developed a model-based method to do precise detection of the positions of the cracks in a metallic structure by using eddy-current superconducting quantum interference device (SQUID) nondestructive evaluation (NDE) measurements. Conventionally, the structure of the defects is found by iteratively solving a numerical forward problem, which is usually based on finite-element, boundary-element, or volume-integral method. This, however, incurs a heavy numerical burden, as every time the forward problem is to be solved, a rigorous numerical... 

Holding yokes made of investment cast 17-4PH stainless steel were too soft (below 20. HRC). Optical microscopy of the parts showed that there is a high fraction of retained austenite after oil quench due to high amount of molybdenum found in parts as an impurity. Subzero treatment in liquid nitrogen after solution heat treating was used to convert retained austenite to martensite but parts became too brittle and fractured during post-heat treating machining. Double and triple aging at 538 °C (1000 °F) after subzero cooling was done on parts. Detailed fractography and tensile testing along with optical microscopy (OM) investigation proved that repeated aging at 538 °C (1000 °F) led to lower... 

The present paper discusses the possibility of adding recycled polymer fibres to high performance concrete (HPC). Fibres used in this study were recovered from discarded car timing belts. To investigate different characteristics of the concrete specimens several destructive and non-destructive tests, such as compressive strength, modulus of rupture, flexural toughness, ultrasonic velocity and electrical resistance tests were carried out. In addition, slump flow tests were conducted on the fresh concrete. Experimental results from the study showed that the use of low percentages (up to 0.5%) of waste fibres improved the modulus of rupture and flexural toughness. Based on ultrasonic and... 

An efficient Non-Destructive Evaluation algorithm has been developed in order to extract the required information for pattern recognition of defects in the conductive samples. Using high-Tc gradiometer RF-SQUIDs in unshielded environments and incorporating an automated two dimensional non-magnetic scanning robot, samples with different intentional defects have been tested. We have used a developed noise cancellation approach for the improvement of the effectiveness of the used inverse-problem technique. In this approach we have used a well examined Finite Element Method (FEM) to apply a noise reduction filtering on the obtained raw magnetic image data before incorporating the signal... 

Incorporating an efficient approach for the finite-element simulation of eddy current superconductive quantum interface device (SQUID) nondestructive evaluation (NDE) systems, an appropriate finite-element method (FEM) has been presented for simulating and analyzing such systems. We have introduced a new model for the planar double-D coils, which are used as the excitation source in eddy current SQUID NDE systems, and also another model for the description of the flaw effect on the induced current. We have also examined our simulation results with their associated measurements. Our system is based on a high-TC YBCO gradiometer RF-SQUID sensor with a flux noise level below 100 μΦ0 √Hz at 100... 

Magnetic flux leakage is the most widely used method for oil and gas pipeline non destructive testing. The saturation level of the sample under test has a significant effect on its efficiency; therefore, the magnetizing yoke requires an elaborate design. The finite element method is the conventional approach used for this purpose, but it is very time consuming. In this article, a neuro-fuzzy method is presented to model the behavior of the magnetizing yoke. Modeling a few different designs with the finite element method and using the results for training the neuro-fuzzy model eradicates the necessity of modeling a huge number of designs with the finite element method. The acquired... 

Design and optimization of centrifugal compressors, based on main blades configuration of impeller have been vastly discussed in open literature, but less researches have addressed splitters. In this research, the impeller of a commercial turbocharger compressor is investigated. Here, profiles of main blades are not changed while the effect of changing the configuration of splitters is studied. An optimization study is performed to find the best configuration using genetic algorithm over a complete operating curve of the compressor. CFD codes with experimental support are used to predict the compressor performance. Quantumetric tests beside destructive analysis of two impellers are... 

The aim of this study was to evaluate the effects of applying low replacement ratios (0.75% and 1.50% of the binder weight) of nano-SiO2 particles with different specific surface areas (200 and 380 m2/g) on the properties of high-performance concrete (HPC). Mechanical (compressive and splitting tensile strengths), electrical resistivity, non-destructive (ultrasonic pulse velocity), and microstructural (mercury intrusion porosimetry, X-ray diffraction, and scanning electron microscopy) tests were conducted to investigate the macroscopic and microscopic effects of nano-SiO2 particles on HPC characteristics. The results indicated that the performance of nano-SiO2 particles significantly... 

In this paper, a pulsed THz imaging system in normal geometry is presented experimentally and the effect of placing a pinhole in front of a covered sample on image quality has been investigated too. Also, the improvement of image quality by using ray transfer matrix is described theoretically. Finally, by using contour system the results are evaluated and the accuracy of THz imaging system is tested. © 2016 IEEE  

A three-phase dual active bridge (DAB) converter is designed and constructed as the DC/DC stage of a 50 kW fast charger station. Recently introduced 300A SiC power modules and drivers are utilized in the converter to obtain a high efficiency. Each module has two interconnected switches with anti-parallel diodes resembling a converter leg. It is observed that the driver halts the module operation as a result of protective actions such as over-current, gate under-voltage, or gate overvoltage. In such case the module operates as a leg with two diodes until an external hardware signal resets the driver. The aim of this paper is to provide analysis, simulation and experiments for a three-phase... 

Over the last few decades, polymer concrete (PC) has been finding use in quick repairing of concrete structures. However, there have been only few studies on the mechanical behavior of PC. The aim of this study is to evaluate the mechanical behavior of PC using destructive and non-destructive tests (NDT). The mixtures were prepared with three different polymer ratios (10%, 12%, and 14%) and two different coarse aggregate sizes (4.75–9.5 mm and 9.5–19 mm). The samples were subsequently tested under three different temperatures (−15 °C, +25 °C, and +65 °C). The Taguchi method and analysis of variance (ANOVA) were used to optimize PC mixes based on the compressive, splitting-tensile, and... 

The use of acoustic emission (AE) technique for damage diagnostic is typically challenging due to difficulties associated with discrimination of events that occur during different stages of damage that take place in a material or a structure. In this study, an unsupervised kernel fuzzy c-means pattern recognition analysis and the principal component method were utilized to categorize various damage stages in plain and steel fiber reinforced concrete specimens monitored by AE technique. Enhancement of the discrimination and characterization of damage mechanisms were achieved by processing time and frequency domain data. Both domains (time and frequency) were taken into account to propose new... 

In this study the influence of morphology of vertically oriented titanium oxide nanotube arrays (TNTAs) on their photocatalytic activities was investigated. To obtain nanotubes with different morphologies, they were prepared at different anodization voltages. The size of TNTAs were measured using SEM images and also determined based on a non-destructive optical method; We demonstrate how the tubular geometry of the TNTAs can be used to adjust the optical and also the wetting properties of them and how these properties affect the performance of the nanostructure in further applications as a photocatalyst. To investigate their potentials for environmental applications, the photocatalytic...