Sharif Digital Repository

Cascaded split-source inverter (CSSI) is a new single-stage modular multilevel topology. Each cell of this converter converts dc to ac power in the buck or boost operation mode without any additional power switch. This article develops a design method based on a detailed model for CSSI. This model shows that energy storage elements experience double-fundamental frequency ripples besides high-frequency ones. It accurately calculates voltage gains and capacitor voltage and inductor current ripples. On the other hand, common carrier-based multilevel modulations have been modified in terms of both reference and carrier signals to control the inverter under symmetric and asymmetric conditions.... 

Cascaded split-source inverter (CSSI) is a new single-stage modular multilevel topology. Each cell of this converter converts DC to AC power in the buck or boost operation mode without any additional power switch. This paper develops a design method based on a detailed model for CSSI. This model shows that energy storage elements experience double-fundamental frequency ripples besides high-frequency ones. It accurately calculates voltage gains and capacitor voltage and inductor current ripples. On the other hand, common carrier-based multilevel modulations have been modified in terms of both reference and carrier signals to control the inverter under symmetric and asymmetric conditions. With... 

In this study, a new isolated high-gain switched-boost DC/DC converter employing two symmetrical switched-boost networks along with a modified control algorithm based on the combination of the pulse-width modulation (PWM) and phase-shift modulation is proposed. Utilising symmetrical switched-boost networks increase the voltage gain of the proposed converter, significantly. Moreover, applying the proposed switching algorithm on the proposed isolated switched-boost DC/DC converter leads to the following advantages: (i) high-voltage gain, (ii) zero voltage switching (ZVS) turn-on of two switches, (iii) ZVS turnoff of two switches and (iv) appearing three controllable parameters (the... 

This paper presents a new implementation of adaptive beamforming algorithm that can be fully implemented on chip. It does not require the knowledge of the incoming signal direction or phase shifter characteristics. Besides, it eliminates the need for the ADC to convert the analog output signal to digital values for the microprocessor and the DAC to apply the calculated values to the control voltages of the analog phase shifters. Thus, it exhibits better convergence speed. In addition, the need for the complex and power-hungry processor is eliminated. Therefore, this implementation consumes less power. Analytical equations and constraints on system design parameters are derived, and the... 

This paper presents a new implementation of adaptive beamforming algorithm that can be fully implemented on chip. It does not require the knowledge of the incoming signal direction or phase shifter characteristics. Besides, it eliminates the need for the ADC to convert the analog output signal to digital values for the microprocessor and the DAC to apply the calculated values to the control voltages of the analog phase shifters. Thus, it exhibits better convergence speed. In addition, the need for the complex and power-hungry processor is eliminated. Therefore, this implementation consumes less power. Analytical equations and constraints on system design parameters are derived, and the... 

In the present paper, a steering knuckle of a passenger car that serves as a highly critical component from the safety point of view, is considered to evaluate accuracy some of categories of the multiaxial fatigue criteria, through comparing their predictions with the experimental results. This component is subjected to the highest road- and steering-induced random and non-proportional loads that are exerted on several points of the component. The mechanical properties and fatigue strengths are determined experimentally and the fatigue life assessment tests are performed by the authors. Quantometric analyses and scanning electron microscope (SEM) have been employed to detect the failure... 

This paper presents the theoretical introduction and experimental validation of the "Class-J2 Mode Power Amplifier," which provides higher efficiency and output power compared with conventional class-J mode counterpart. This mode of operation is realized by injection of the second-harmonic current to drain node of a class-J power amplifier (PA) to reduce the 45° phase shift between drain current and voltage signals. Similar to class-J PAs, the second-harmonic impedance of class-J2 PAs is purely reactive to simplify the design of the output matching network. The auxiliary second-harmonic injection circuit comprises a transistor biased in class-B mode followed by a class-C biased amplifier to... 

Dual active bridge isolated bidirectional DC converter (DAB-IBDC) has a poor efficiency at light loads and non-unity voltage conversion ratio. In this paper the current stress of the converter is analyzed and the effect of maximum phase shift ratio and leakage inductance on the current stress of the converter is investigated. In order to increase the efficiency of the converter and reduce the current stress, the current stress optimization has been done and the design procedure is presented. Simulation results are used to validate the results of the theoretical analysis. © 2017 IEEE  

Here we introduce a phase-shifting digital holography-based method to determine the temperature profile around an irradiated (sub-)micron spherical bead. The method utilizes a Mach-Zehnder interferometer implemented into an open setup microscope. The results of irradiated gold spheres with diameter of 400 nm and also silver-coated micron-sized silica beads embedded in silicone oil are presented. We show that the applied method is able to accurately determine the surface temperature with accuracy of 1 °C. Our experimental results perfectly confirm the theoretical prediction of temperature profile around the irradiated bead  

A highly efficient two-dimensional meta-reflect-array manipulating the phase and amplitude of far-infrared electromagnetic wave is proposed. The reflect array consists of patterned graphene nano-disks resides on a subwavelenght thick optical cavity to enhance the interaction of electromagnetic wave. It is shown that the reflected wave from each unit cell can almost cover the 2π range phase shift by changing the radius of the graphene nano-disks while at the same time maximizes its amplitude. Proposing a transmission line model for the proposed structure, we realize a meta lens as a flat optics functionality. © 2016 IEEE  

Plug-in hybrid electric vehicles draw electricity from the electrical grid and store energy in their batteries. To increase charge availability for plug-in hybrid electric vehicles, on-board chargers can be used, which should be small in size and lightweight. In this article, an on-board bidirectional soft-switched battery charger is proposed that utilizes a phase-shift-controlled dual-bridge series resonant converter with isolation. The bidirectional characteristic of proposed charger makes it suitable for vehicle-to-grid operation (i.e., injecting power from the vehicle to the grid) in smart grids. A switching control scheme is also proposed to provide soft-switching operation for all... 

We extend the result by Tse and Verdú on the optimum asymptotic multiuser efficiency of randomly spread code division multiple access (CDMA) with binary phase shift keying input. Random Gaussian and random binary antipodal spreading are considered. We obtain the optimum asymptotic multiuser efficiency of a K-user system with spreading gain N when K and N → ∞ and the loading factor, (K/N) , grows logarithmically with K under some conditions. It is shown that the optimum detector in a Gaussian randomly spread CDMA system has a performance close to the single user system at high signal-to-noise ratio when K and N → ∞ and the loading factor, (K/N), is kept less than (log3 K/2). Random binary... 

In this paper, a novel reduced switch cascaded transformer multilevel inverter is proposed. In this structure, a new structure is replaced with conventional H-bridge inverter. It consists of four high frequency switches, two line frequency switches, and two transformers which can be assembled in one core with a specific winding connection. This topology can produce 5 or 7 voltage levels depending on transformers turns ratio. The simplicity and modularity are its advantages compared to the existing structures. Beside these advantages, due to its similarity with H-Bridge converter, it is possible to use a modified technique based on conventional phase shift pulse width modulation to generate... 

Rotating field gradients (RFGs), generated by simultaneously applying sine- and cosine-modulated gradient waveforms along two perpendicular directions, provide an alternative diffusion sensitization mechanism for magnetic resonance imaging and spectroscopy. Two RFGs with a 90-degree phase shift between them are applied around the 180-degree RF pulse in a spin echo sequence to measure the diffusion orientation distribution function (dODF) directly. The technique obviates transforming the data from a space reciprocal to the displacement space. Here, we compare RFG results with those obtained by two pulsed field gradient (PFG) techniques: q-ball imaging (QBI) and its extension to constant solid... 

Here, an in-depth study of a novel electro-optic phenomenon suggested earlier in optical waveguides, referred to as the conducting interfaces, is carried out. It is shown that it would be possible to achieve a very strong optical modulation effect in slab waveguides fabricated on the standard III-V InAlGaAs compound platform. The electro-optic effect is obtained by controlling the density and population of the electron and hole states in the well layer. The additional phase shift contributed to the reflection phase of the guided electromagnetic wave constitutes an ultrastrong source of optical modulation and phase control. It is estimated that a Mach-Zhender configuration based on this... 

When a transparent plane-parallel plate is illuminated at a boundary region by a parallel monochromatic beam of light, Fresnel diffraction occurs because of the abrupt change in phase imposed by the finite change in refractive index at the plate boundary. The intensity of the diffraction fringes varies periodically with changes in the optical path difference of the light passing through the plate edge. The optical path difference depends on the incident angle of the light, the refractive index of the plate and surrounding medium, and the wavelength of the light. Plotting the intensity of the diffraction fringes versus optical path difference provides a general phase shift method for phase... 

Cobalt-based catalysts were prepared on gamma alumina supports, and their behaviour for different Fischer-Tropsch synthesis (FTS) conditions was assessed. Although Co/γ-Al 2O 3 is a well-known FTS catalyst, its durability ought to be improved to make the industrial process economically feasible. The effect of lanthanum doping on the catalyst lifetime was examined utilising reactor tests and catalyst characterization techniques including TPR, ICP and N 2 porosimetry. Reactor test results revealed that an optimum amount of lanthanum improved catalyst activity and selectivity. Increasing amounts of lanthanum doping up to about 1.1wt% seemed to modify the chemical composition of the support... 

A 6-bit passive phase shifter for S frequency band has been designed in a standard HEMT technology. A new switched-network topology has been proposed for implementing the 5.625 phase shift step which these digital bits are series with each other. We used Advanced Design System (ADS2010) to perform simulations. These digital bits will produce 64 different mode phase shift of -177.15 to +177.15 degree. In all cases simulation obtained less than 1 % error  

In this paper, a reliable low power single phase grid-connected inverter for photovoltaic modules is proposed. The inverter has improved lifetime since large electrolytic capacitor is replaced with small film capacitor due to circuit topology, power processing and proper control scheme. Thus the main limiting component in single phase grid connected inverters is obviated. The proposed inverter consists of two power processing stages. First a dual active bridge (DAB) converter boosts the voltage of PV panel to approximately 440 V and eliminates impact of high dc bus voltage ripples. A proper feed forward control is proposed to regulate the dc bus voltage with high ripple. Simulation results... 

This paper presents the design of a 6-bit active digital phase shifter in 0.18-μm CMOS technology. The active phase shifter synthesizes the required phase using a phase interpolation process by adding quadrature phased input signals. It uses a new quadrature all-pass filter for quadrature signaling with a wide bandwidth and low phase error. The phase shifter has simulated RMS phase error of <0.85° at 2.4-5 GHz. The average voltage gain ranges from 1.7 dB at 2.4GHz to -0.14 dB at 5 GHz. Input P1 dB is typically 1.3±0.9 dBm at 3.5 GHz for overall phase states