Sharif Digital Repository

Multiphase flows are commonly encountered in oil and gas industries. Flow fields in production operations are often complex and include multiphase flows of gas and liquid. The prediction of pressure gradients, liquid holdup and flow patterns occurring during the simultaneous flow of gas and liquid in pipes and wellbores is necessary in designing production facilities. Previously, due to their complex nature, these flow patterns have been mostly investigated only experimentally and empirical correlations based on the experimental data. From another point of view, it is almost impossible to experimentally realize all the flowing conditions for each of the flowing patterns. Nowadays, computer... 

Because of the importance of simulations in the oil industry, there are different software applications designed for this purpose. The purpose of the simulation in the oil industry is to reduce operational errors during the operation and to achieve the most ideal mode of operation. However, in the simulation of multiphase fluid flow because of the special circumstance, simulation plays an important role in the oil industry. OLGA multiphase flow simulation software is a strong simulation software for water, oil, Gas wells, wellhead facilities, refineries and pipelines and it is capable of simulating pipelines under various dynamic conditions. Simulation of drilling hydraulic parameters is... 

Transportation of cuttings and efficiency of the hole cleaning has been one of the major concerns of stake holders in the oil and gas industry.This is because a successful drilling program is a key to a productive and profitable oil and gas business. A successful drilling program is as a result of an efficiently cleaned hole. On the other hand, a poor or inefficient hole cleaning implies accumulation of cuttings or formation of cuttings bed in the well. This often leads to decreased rate of penetration, increased cost of drilling, fractured formation, increased plastic viscosity of mud as a result of grinding of cuttings and stuck pipe. Hole cleaning is effected primarily with a drilling... 

The main purpose of this study was to increase the flow circulation within the flat plate oscillating heat pipes as a result Increase the heat transfer rate by placing diagonal grooves in the evaporator. The project in two stages a simple page and diagonal companion page are provided to investigate the effect of diagonal grooves. First a simple plate and then a second one with diagonal grooves in the evaporator it was made. Thermal performance of the heat pipes at each of the stages at different filling ratios of 40%, 50%, 60% and 70% for variable input capacities have been studied and compared. The results of the second stage showed that the performance of the new heat pipe at the optimum... 

Solar distillation is a comparatively easy treatment of brackish (i.e. contain dissolved salts) water supplies. Distillation is a well-known process, which may be used for water filtration utilizing heating sources. In this research, the solar distillation set with heat-pipes was made and tested in 18 months.At the first step, during four days, the pipes were filled with some water to certain height every day while temperature and produced water were estimated. At the second step, the vacuum pipes were filled with some oil and tested for 4 different heights within 4 days; and in final steps, aluminum chips, washing wire and metal foam were shaded into the tank then tested by an optimum water... 

With regard to an increasing world population and the constant capacity of water resources, new and valid methods should be implemented to preserve freshwater resources and accordingly produce drinking water. In the present study, a solar hybrid system was studied by experimental and theoretical means to facilitate the transformation of waste heat from photovoltaic module (PV module) into useful heat that can be used in a solar desalination (SD) system for freshwater production purposes. The study aimed to fabricate a SD system by using both PV module and thermosyphon heat pipes (THPs) technologies in a single system. In the modeling section, the goal is to present a comprehensive model... 

In solar systems, the required space and cost, the impossibility of continuous access to energy, energy storage and optimal use of the received energy are the basic parameters and issues. Therefore, with the knowledge of these cases, proposing ideas and approaches to study the possibility of reducing the above mentioned issues are of the main objectives of this research. In solar thermal systems and solar electrical systems, the collector and photovoltaic panels are the main components, respectively. However, the studies show that there are issues regarding the existing collectors and photovoltaic panels, e.g. the flat-plate type which is most used in solar systems, and the basis is not... 

In petrochemical, Process condensate is mixtures of dissolved gasses and water. Process condensate striper tower is a physical separation equipment where dissolved gasses remove from water by saturated steam. The Process condensate feed is introduced at the top of the column and the steam input is located at the bottom. When the process condensate enters the stripper tower, it comes down the tower also when the steam enters the tower, it goes up, because there is packing portion in the stripper tower and two streams are countercurrent, as result contact between steam and process condensate, a lot of dissolved gases vapors and exits with steam from top of tower. After leaving the tower, the... 

Nowadays a major part of energy, fresh water and sewer water in over the world are transmitted by buried pipe, and always these lines are under the loads and different stresses such as corrosion, earth quick and etc.
In many countries the age of these lines are more than 30 years which causes corrosion of the pipe wall and the necessity of health investigating of transmission lines has a special importance for the governments and leak detection can also keep the natural environment healthyand the costs will come down significantly, scientists and researchers have always tried different ways to check the health of the pipes.
In the field of leak detection and the problems of age... 

Pipeline systems are one of the cheapest ways for distribution and transportation of petroleum and natural gas. The testing of pipes used in the petroleum industry is necessary to avoid unplanned process interruptions, environmental pollution and provide good safety. One of the methods which is used for pipeline inspection is the ultrasonic non-destructive testing (NDT) technique. The use of conventional NDT techniques such as ultrasonic thickness gauging is a slow inspection process, which becomes very expensive when full inspection is needed. Ultrasonic guided waves provide an appropriate fast screening technique. These waves stress the whole pipe wall and propagate along the length of the... 

Airlift pumps are devices for lifting liquid phase incorporating the gas phase to be injected in the bottom of the liquid column. Gas-liquid two-phase flow being the main part of the flow through these systems, flowing in vertical pipes of airlift pumps has different regimes namely bubbly, slug, churn and annular. Generally these regimes appear starting from bubbly to annular from bottom to top of the upriser pipe. Gas/liquid multiphase flows occur in a wide range of natural and man-made situations such as boiling heat transfer, cloud cavitation, bubble columns and reactors in the chemical industry, cooling circuits of power plants, spraying of liquid fuel and paint, emulsions, rain, bubbles... 

Increasing population growth and scarcity of fresh water resources have created the challenge of water supply, especially in the Mena region. Thus, many countries in the region have turned to innovation in the development of high-energy seawater desalination technologies. Utilizing the waste heat of refineries in the desalination industry can reduce costs and preserve the environment. In this article, effective ways to use the waste heat of other flue recovery steam of Bandar Abbas oil refinery are investigated. The integration of the heat recovery system consisting of recuperative heat exchangers and heat pipes with thermal desalination plants is investigated by multi-stage flash and... 

Providing fresh water, ending fossil fuels, using renewable energy and achieving a clean biological environment in different parts of the world especially in Iran beside having access to many saline water sources, Shows the need for research in the field of solar still desalination. The goal of current study is to increase the performance of the solar still system through the use of an energy storage system and an additional condenser. Adding an additional condenser to a conventional solar still lead to an increase in the rate of evaporation and consequently increase the production of the system. Also, by collecting distilled water from the sidewalls, the amount of water produced... 

Due to the operation of proton exchange membrane fuel cell (PEMFC), temperature will rise because of the electrochemical reactions and control of temperature is one of the most important sections that has influence on the performance of the fuel cell. In this study three alternative for cooling and controlling the temperature situation is proposed and compared. the experimental setup consists of the simulated fuel cell that produce heat just like PEMFC and number of thermosyphon miniature heat pipes for evoke the heat and three types of condenser that makes three different scenario for this cooling setup. Free convection, force convection using Fan and force convection using circulating... 

The Engine of a vehicle is an energy conversion system, where specific chemical energy is converted in to heat in a combustion chamber. In order to reduce thermal tension in the cylandr, part of heat is removed with the help of circulating water and it is dissipated in the radiator. As a result, part of input energy is wasted in to the atmosphere through cooling system in each cycle of engine. Heat recovery in the cooling system and preheating combustion air of fuel could enhance energy efficiency and it may contribute to fuel economy. Heat recovery may be realized with the help of heat pipes. Heat pipes may be utilized for heat recovery and preheating fuel or air whichare inlet to the... 

Fuel cell-based CHP systems for distributed residential power generation represent an interesting alternative to traditional thermoelectric plants. This is mainly due to the high efficiency obtainable in the production of electricity and heat in a decentralized, quiet and environmental friendly way. The current thesis focuses on the development, in Matlab_Simulink environment, of a complete dynamic model of a residential cogenerative (CHP) energy system consisting of the Proton Exchange Membrane fuel cell (PEMFC), in two scenarios. The first scenario emphasizes on use of fan and usual Heat Exchanger for cooling of Proton membrane fuel cell and conveying generated heat in PEM fuel cell to... 

On-board hydrogen storage systems (as a substitute for fossil fuels) employing high-pressure metal hydrides, promise advantages including high volumetric capacities and cold start capability. In this project, we discuss the development of a system simulation model in Matlab/Simulink platform. Transient equations for mass balance and energy balance are presented. During driving, the bed requires external heat source, which is planned to be supplied by rejected heat from proton-exchange membrane (PEM) fuel cell. Therefore, this study develops a system-level dynamic model of a PEM fuel cell that is capable of characterizing the mixed effects of temperature, gas flow and capacitance, with... 

This paper presents, various parameters of the composite patch for repairing and reinforcement the damaged composite pipe have been investigated. There are various parameters of the composite patch such as Laminate orientation, length, width, material and thickness of the patch. by changing these parameters in each analysis and comparing the results, the optimal patch for the damaged pipe is determined  

Due to well mechanical properties and high resistance to environmental conditions, metal pipes are used to transport oil and gas products, water and sewage, as well as hydraulic systems in aircraft or aerospace systems. Therefore, maintenance of oil and gas transmission lines in energy-related industries and pressurized tanks in the aviation industry has always been a concern of engineers. Due to the problems of old methods for repairing damaged pipelines or aerial structures, it seems necessary to provide new, safe and cheap methods for repairing them. Various engineering standards for pipelines and their repairs have been presented so far which have analytical solutions to determine the... 

In this project, vibration and stability condition of a pipe conveying flow has been studied for use in firefighting plane. The Plane is a multi-rotor that carries the pipe to a certain height and it does the washing work there, bassed on the fluid flow from the nozzle embedded in the end of the pipe. Due to the flexibility of the pipe in this application, structure modeling is based on cable without bending stiffness. The Galerkin method is used to solve equations by considering the assumed mode shape for structure. At first, by analyzing free vibrations, different boundary conditions were considered for the pipe and the natural frequencies and natural shape modes were extracted in...