Sharif Digital Repository

A search is presented for a heavy W′ boson resonance decaying to a B or T vector-like quark and a t or a b quark, respectively. The analysis is performed using proton-proton collisions collected with the CMS detector at the LHC. The data correspond to an integrated luminosity of 138 fb−1 at a center-of-mass energy of 13 TeV. Both decay channels result in a signature with a t quark, a Higgs or Z boson, and a b quark, each produced with a significant Lorentz boost. The all-hadronic decays of the Higgs or Z boson and of the t quark are selected using jet substructure techniques to reduce standard model backgrounds, resulting in a distinct three-jet W′ boson decay signature. No significant... 

Background: in this study, two proton beam delivery designs, i.e. passive scattering proton therapy (PSPT) and pencil beam scanning (PBS), were quantitatively compared in terms of dosimetric indices. The GATE Monte Carlo (MC) particle transport code was used to simulate the proton beam system; and the developed simulation engines were benchmarked with respect to the experimental measurements. Method: A water phantom was used to simulate system energy parameters using a set of depth-dose data in the energy range of 120-235 MeV. To compare the performance of PSPT against PBS, multiple dosimetric parameters including Bragg peak width (BP W50), peak position, range, peak-To-entrance dose ratio,... 

To mitigate global warming and fossil fuel shortages a novel oxy-fuel combustion power plant integrated with a power to gas system is proposed. A net-zero emission MATIANT cycle with inherent CO2 capture ability is selected as the power cycle also providing the CO2 and power demand of the power to gas system, which comprises a proton exchange membrane electrolyzer for hydrogen production and a Sabatier reactor for methanation. A techno-economic investigation, a multi-objective optimization, and a sensitivity analysis are carried out. A comprehensive economic method that covers all economic aspects is utilized, and a Sabatier reactor model which considers the possibility of the presence of... 

Natural gas hydrate, a crystalline solid existing under high-pressure and low-temperature conditions, has been regarded as a potential alternative energy resource. It is globally widespread and occurs mainly inside the pores of deepwater sediments and sediments under permafrost area. Hydrate production via well depressurization is deemed well-suited to existing technology, in which the pore pressure is lowered, the natural gas hydrate is dissociated into water and gas, and the water and gas are produced from well. This method triggers multiphysics processes such as fluid flow, heat transfer, energy adsorption, chemical reaction and sediment deformation, all of which are dependent on the... 

In this research, the design of a solar reverse osmosis desalination plant was investigated by integrating various components using TRNSYS and ROSA software. To this goal, a two-stage reverse osmosis system with 50% recovery in the city of Chabahar was modeled. The calculations were performed in three different case studies, i.e., a photovoltaic power plant, a solar collector power plant with Organic Rankine Cycles, and a photovoltaic thermal power plant with Organic Rankine Cycles, with the reverse osmosis desalination plant being a novel investigation. Water production and electrical energy generation of each case study were evaluated both on a daily and yearly bases. The simulation... 

Ionic liquids (ILs) are a growing trend in Enhanced Oil Recovery (EOR) studies as alternatives to commercial surfactants due to their environmentally friendly nature, and their resistance in harsh temperatures and salinities. ILs are customizable and come in an immense variety, and therefore, it is vital that different combinations of cation/anion be investigated for use in the industry. In this work, experiments are designed and performed to evaluate novel ILs’ surface activity and performance in a lab-scale EOR set-up, compatible with Iranian oil reservoir conditions. Three imidazolium-based ionic liquids were used, namely, butyl-methylimidazolium nitrate, hexyl-methylimidazolium nitrate,... 

Asphaltenes, and their related issues, have been the focus of many literature investigations. However, in-depth analysis of asphaltenes structure and its relation to asphaltenes stability has been considered by fewer studies. In this research, extensive analysis of the structure of asphaltenes extracted from light, medium, and heavy oils is provided, together with analysis of three subfractions of the medium oil asphaltene having the least, intermediate, and highest solubilities. To this end, elemental analysis, EDX, mass spectroscopy, FTIR, NMR, XRD, and SEM results were collected. Higher hydrogen content and hydrogen/carbon atomic ratio, lower aromatic nature and olefinic entities were... 

Hydrogen technology through water electrolyzer systems has attracted a great attention to overcome the energy crisis. So, rationally designed non-noble metal based-electrocatalysts with high activity and durability can lead to high performance water electrolyzer systems and high purity hydrogen generation. Herein, a facile two-step method: hydrothermal and electrodeposition, respectively, are developed to decorate highly porous three-dimensional binder-free structure NiFeO/NiO nanosheets array on Ni foam (NiFeO/NiO/NF) with robust adhesion as a high-performance electrode for Hydrogen Evolution Reaction (HER). The electrodeposition process applied after the initial hydrothermal process... 

In Industry 4.0, the emergence of new information technology and advanced manufacturing technology (e.g., digital twin, and robot) promotes the flexibility and smartness of manufacturing systems to deal with production task fluctuation. Digital twin-driven manufacturing system with human-robot collaboration is a typical paradigm of intelligent manufacturing. When production task changes, manufacturing system reconfiguration with dynamic opeartion task allocation between operator (human) and robot is a key manner to maintain the production efficiency of intelligent manufacturing system with human-robot collaboration. However, the differences between operator and robot are neglected during... 

Designing efficient and inexpensive catalysts toward the oxygen evolution reaction (OER) is vital for achieving sustainable and green hydrogen fuel production through water electrolysis. Herein, we have synthesized several bi- and trimetallic metal–organic frameworks (MOFs) composed of Co, Ni, and Mn metals and benzene-1,3,5-tricarboxylic acid linker. The MOFs were prepared via a simple hydrothermal method, and their electrocatalytic performances in alkaline OER were investigated. A battery of analytical techniques was employed to characterize the as-synthesized materials, including field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM),... 

Chitosan is a natural polymer with acceptable biocompatibility, biodegradability, and mechanical stability; hence, it has been widely appraised for drug and gene delivery applications. However, there has been no comprehensive assessment to tailor-make chitosan cross-linkers of various types and functionalities as well as complex chitosan-based semi- and full-interpenetrating networks for drug delivery systems (DDSs). Herein, various fabrication methods developed for chitosan hydrogels are deliberated, including chitosan crosslinking with and without diverse cross-linkers. Tripolyphosphate, genipin and multi-functional aldehydes, carboxylic acids, and epoxides are common cross-linkers used in... 

One of the most important goals of any organization for a product that goes into the design or manufacturing process is to improve its reliability. Reliability growth is defined as improving a product's criteria (input parameters) during operation using changes in design or production. This paper presents a hardware-centric approach for the reliability growth of systems following normal distribution based on the Non-Homogeneous Poisson Process (NHPP). To reach this goal, the reliability growth modeling equations for the NHPP with the assumption of the normal distribution for failure data are extracted and obtained. Then, the maximum likelihood estimation technique based on the... 

Second generation immigrant entrepreneurs (SGIEs) in developed economies have contributed to the emergence of new areas of business activity, especially in information technology, business services, and creative industries. An understanding of their growth strategies can shed light on the role of individual immigrants in the founding of potentially global firms competing with large multinational enterprises. Based on eleven case studies of SGIEs of Indian origin in the UK, our findings reveal that SGIEs are heterogeneous in their growth strategies contingent on their a) founding or succession context, and b) use of social ties. Founder SGIEs combining non-co-ethnic ties with non-family... 

Since the discovery of the Higgs boson in 2012, detailed studies of its properties have been ongoing. Besides its mass, its width—related to its lifetime—is an important parameter. One way to determine this quantity is to measure its off-shell production, where the Higgs boson mass is far away from its nominal value, and relating it to its on-shell production, where the mass is close to the nominal value. Here we report evidence for such off-shell contributions to the production cross-section of two Z bosons with data from the CMS experiment at the CERN Large Hadron Collider. We constrain the total rate of the off-shell Higgs boson contribution beyond the Z boson pair production threshold,... 

In the present contribution, visible-near infrared hyperspectral imaging (Vis-NIR-HSI) combined with a novel chemometric approach based on mean-filed independent component analysis (MF-ICA) followed by multivariate classification techniques is proposed for saffron authentication and adulteration detection. First, MF-ICA was used to exploit pure spatial and spectral profiles of the components. Then, principal component analysis (PCA) and hierarchical cluster analysis (HCA) were used to find patterns of authentic samples based on their distribution maps. Then, detection of five common plant-derived adulterants of saffron including safflower, saffron style, calendula, rubia and turmeric were... 

The rational design of composite catalysts is critically essential for electrochemical water splitting. Here, we report on a novel hierarchical composite that comprises NiFeSe2 nanoparticles and NiCo2O4 nanoflakes supported on nickel foam (NF) as an efficient electrocatalyst for the hydrogen evolution reaction (HER). The conjunction of the NiFeSe2 nanoparticles and NiCo2O4 nanoflakes introduces a new synergistic effect for the HER, resulting in an improved NiCo2O4 catalyst. The as-prepared NiFeSe2/NiCo2O4/NF electrode exhibited an enhanced HER activity, with a low overpotential of 83 mV at a current density of 10 mA cm−2, a low Tafel slope of 45 mV dec−1, and an excellent long-term... 

Besides the conventional fiber production methods, microfluidics has emerged as a promising approach for the engineered spinning of fibrous materials and offers excellent potential for fiber manufacturing in a controlled and straightforward manner. This method facilitates low-speed prototype synthesis of fibers for diverse applications while providing superior control over reaction conditions, efficient use of precursor solutions, reagent mixing, and process parameters. This article reviews recent advances in microfluidic technology for the fabrication of fibrous materials with different morphologies and a variety of properties aimed at various applications. First, the basic principles, as... 

The growth of process industries has escalated the probability of loss containment scenarios of hazardous materials that can be tackled via process safety schemes. For preliminary design stage, the inherent scheme is more promising to generate sustainable process designs. For this purpose, various process routes are typically compared to recognize the safer one via numerous indexing methods to eliminate routes with hazardous materials. However, these indices lack in accommodating the equipment characteristics and the underutilization of process and chemical characteristics. Specifically for chemical characteristics, the toxicity aspect has not been engaged for process route selection in... 

Despite extensive studies on electrorefining to remove impurities from copper production units, bleeding electrolytes is the most popular method for controlling impurities due to low operating costs. A controlled cooled-reheat cycle was used to remove impurities in industrial electrolytes of Khatoon Abad copper company. Phase identification and physical study were done by the XRD, SEM, TEM, and FTIR techniques. The results confirmed the possibility of the removal of 23 wt% Ni, 26 wt% Sb, 2.4 wt% As and convention of 6 wt% of As5+ to As3+ at cooled-reheat cycle. © 2022 The Author(s)  

Multilateral well is a promising technology in developing oil reservoirs. Because this technology may increase the production rate per well and reduce the costs of field development, it is rapidly replacing the old methods. This study uses a three-dimensional line-source model with direct search methods, including pattern search and genetic algorithms to optimize the well trajectories. This method was applied to several cases, with different forms of wells and reservoirs. In all cases, significant improvement was observed in the production rate. Furthermore, the production enhancement using the optimized well trajectories which have curved-paths is compared to the case with linear well...