Sharif Digital Repository

The methodology proposed by UNIDO , to investigate feasibility study of industrial project, is a useful tool in pre-investment decision making. In this work feasibility of investing on "Gas To Liquid" GTL Plant of Asalouye is investigated. Having gathered required information, including gas field potential, required technology and machineries, cost of investments , required manpower to run the UNIDO methodology is used to investigate the investment, the result of the work shows that the project is feasible and it would have internal rate of return of 24% ( by sale cost= 81 $ per barrel of GTL product)  

Aabsal Co. was established in north east of Tehran in 1956, under the name of Loab Iran Private LTD.  Co.  and  continued  its  activity  in  manufacturing  enameled  dishes,  bowl,  tea  pots  and  etc.  until 1964. In  this  thesis  we  have  paid  attention  to  basics  of  TPM  and  how  to  implement  PM  procedures.  First we have paid attention to all the maintenance forms and how these forms work together in the company, and then the relationship between departments sections like manufacturing and maintenance are considered. Finally we have attempted to implement TPM. For this purpose we have taken a section of the factory as a pilot plant and have started to implement TPM there to... 

According to authorities and statistical figures, Iran is seriously facing insufficient housing crisis. Studies show that through an increase of 1.5 million units in annual housing construction capacity, this crisis will be overcome in 5 years. Although successful execution of such a big project is not unprecedented in the world, housing experts believe fulfillment of this plan through traditional method of construction in the country is impossible. The country's capacity of industrialized construction which is known as the remedy, is only limited to 2-3% of total construction. Thus development of this approach through financial, legal, ... supports of investment in prefabrication... 

In this thesis, we have studied some exact solutions for low dimensional strongly correlated systems, especially spin chains. In the first chapter using simple AKLT model and introducing Valence Bond Solid States we have prepared good area to study Finitely Correlated States. In addition to presenting relation between these concepts, we have expressed Matrix Product States as a simpler formalism to deal with Finitely Correlated States. In the second chapter we have discussed the Optimum Ground State concept and we have studied a spin-32 with nearest neighbor interaction and a spin-1 model with next nearest neighbor interaction
as example  

Because of production of large volumes of Produces Water during oil exploration, it is necessary to purify this water for reuse or discharging to environment. Thus, finding a suitable method for removing contaminations seems necessary. In the present study, removal of soluble and dispersed organic contaminants from produced water by Dissolved Air Precipitation/ Solvent Sublation has been studied. Combination of floatation by dissolved air and extraction with solvent has been used for removal of organic compounds in order to study simultaneous effect of both methods on removal efficiency. Samples used in the experiments were tested in two groups: the first group was synthesized samples of... 

Fast growing load in power systems associated with a large gap between heavy load and light load periods, generation scheduling and unit commitment (UC) problem has become a crucial issue in Scheduling time horizon. In a vertically integrated power system, unit commitment determines when to start-up or shut-down units and how to dispatch online generators over a given scheduling horizon in order to minimize the operating costs. Therefore main objective of this thesis is selected as unit commitment considering ramp rate, emission and line flow constraints. In this thesis four main works has been done: at first generation scheduling considering next hour is done which may yield to increase... 

The classical economic batch quantity (EBQ) model assumes that all produced items have a perfect quality. But in real-life production systems, generation of defective items is inevitable. A portion of these defective items is considered to be scrap , while the other is assumed to be reworkable and reworking them can reduce costs and increase productivity. In this thesis we have studied the economic batch quantity for a single stage production system with rework and scrapping . We want to satisfy the customer demand and minimize total costs of the system like set up costs , production costs , rework costs , holding costs , shortage costs and scrapping costs . In the first chapter of this... 

Although technological specialization has been recognized as a stimulating factor of international trade (Ricardian theory), new approaches emphasize the endogeneity of technological heterogeneity across countries. Following them, we proceed to examine the effect of free trade on technological differences among 20 OECD members during 1996-2008. We first use the model of Eaton and Kortum (2002) to obtain an annual estimate of technological heterogeneity within the OECD group. We then analyze the behavior of this index facing international trade statistics in the same period. The results show that the OECD countries have been experienced a technological convergence, thanks to a boost in the... 

Government intervention in markets may go beyond the market regulation. Interventions may cause some idiosyncratic price distortions. It means the relative prices of factors to become different among firms. Therefore, micro conditions for firms will be changed. These will result in misallocation of factor production between firms and change in manufacturing TFP. According to data from about 14000 medium and small industrial firms in Iran, removing misallocation of production factors (capital and energy) and output idiosyncratic distortions between industrial firms would result in 115 percent increase in manufacturing TFP.

 

One of the most important problems in using wind energy is the estimation of wind energy potential of a region with acceptable accuracy. To use wind energy and convert it to electrical energy it is necessary to study the economical aspects of wind farm installation, and to choose an appropriate wind turbine to be installed in a region. To do such a study and to choose approperiate wind turbine, annual energy output of different wind turbines should be estimated in that region. The porpuse of this thesis is to develop new methods to estimate annual energy production of a wind turbine by using some of the parameters of wind speed pattern of a region such as wind speed average, wind speed... 

Seasonal Products are a group of products with a limited life time. If seasonal products are not sold during a specified time, they have to be sold at a salvage price which is close to zero. Although one can find many studies in the literature regarding pricing of this type of products in order to maximize the profit, none of them have considered the simultaneous effect of both advertising and pricing. The objective of this paper is to introduce an integrated model of dynamic pricing and advertising for seasonal products. The advertisement is classified into two main categories; to advertise a specific type of product and to advertise the brand of the company. To obtain the mentioned goal,... 

Management decisions, Enhanced Oil Recovery, and reservoir development plans in petroleum industries are based on predictions by reservoir simulation. Due to uncertainties in model parameters or engineering assumptions, the simulation results are not accurate, while they are correct. One remedy is to match simulation results with engineering measurements, typically pressure and flow rate, by adjusting model parameters. In Reservoir Engineering literature, this is called History Matching and is an optimization problem. Common methods of history matching are based on finite difference simulation, and therefore have a very low speed. In addition, these methods usually ignore Geostatistical... 

In industry it is usual to develop a family of similar software instead of a single one. Software product-line (SPL) engineering or family-based software engineering is an approach that tries to minimize needed effort and time-to-market and maximize quality of manufactured products through strategic planning for maximizing reuse among members of the family. On the other hand it is known that testing software is an indivisible part of software development process which requires considerable time and effort. With large number of products created from an SPL, it is obvious that testing should be conducted in such a way that needed effort does not maintain a linear relationship with number of... 

The growing requirements for renewable energy production lead to the development of a new series of systems, including wave and tidal energy conversion systems. Due to their sensitivity and the impact of the aggressive marine environment, the selection of the most adequate location for these systems is a major and very important task. Several factors, such as technological limitations, environmental conditions, administrative and logistic conditions, have to be taken into account in order to support the decision for best location. The aim of the present study is to provide an Atlas of IRAN Offshore Renewable Energy Resources (hereafter called ‘the Atlas’) to map out wave and tidal resources... 

Software development process is a base ground for all software activities and ensures all aspects of the software. No quality is guaranteed without a definite process. Model-Driven Software Development process proposes an industrial method for software companies to produce the required software through model(s) and tools. On the other hand, Software Product Line imposes a set of frameworks and principles. As a result a tangible decrement of development time and cost along with an increment of quality is achieved. Mixing both processes creates a stronger industrial process in order to decrease the development time and cost. In this thesis, through a survey on both of the processes and related... 

In today’s competitive world, productivity is one of the main components that guarantee the success and profitability of an industry or a project. This research has studied productivity of dam construction projects in Iran that are usually classified as mega projects. First, the major factors influencing productivity of dam construction projects in Iran were identified and evaluated. Three main sources of information namely; literature review, records and lesson learned from previous projects and experts’ opinions were used to identify these factors. Then, 41 main factors influencing productivity were selected and the effect of each factor was measured based on the results obtained from... 

This research attempts to develop the optimal solution for an inventory problem consisting of a single machine which produces items some of which may be defective. We assume that no shortages are allowed and all defective items are to be reworked. Setup cost for rework and waiting time of defectives are considered. This research consists of two different parts. In the first part we consider two different policies where in the first policy in each cycle after the regular production the machine is setup for the rework of defectives of the same cycle. In the second policy several cycles constitute a period. All the defectives produced in the period are reworked in the last cycle of that period.... 

Software Product Line is known as a process of developing family of the software together. The methods of building a software product line is trying to capture commonality and variety of this family of software and form a product line based on them. Commonality of this family of the software allows us reuse in every aspect of the development of software. Nowadays, software architecture as a one of the most important aspect of software engineering, plays major role in specifying the tasks and clearing the relationship between people. It can divide large and complex system to some sub-system and overcome complexity of the system. Software architecture forms a basis for communication among... 

The main objective of all managers of the economic organizations, manufacturing and industrial companies and service providers is to take steps toward improvement and effective use of different resources like workforce, capital, materials, energy and information. To attain the desired productivity, managers have to observe requirements such as establishment of a working organizational structure, effective implementation methods, safe equipment and tools, balanced working atmosphere and qualified human force as the most important factor. Therefore productivity culture should be publicized throughout the organization, and human force should be considered as the main component of this process....