Sharif Digital Repository

A practical design method is presented which used the fuzzy logic advantages in adaptation of sliding mode control. The combined Fuzzy Adaptive Sliding Control (FASC) is designed in such a way to enhance satisfactory sliding performance and robustness with good level of chattering alleviation. The design approach is valid for a class of nonlinear uncertain MIMO systems. This control algorithm does not require the system model. A supervisory term is appended to the controller to assure the stability of fuzzy sliding mode control through Lyapunov theory. The design approach has been applied to a 2DOF twin propeler system with large uncertainty. Simulation results verified effectiveness of... 

To achieve high rate of data transfer, tape mechanisms must be able to transport the tape with a constant velocity for scanning. During this process, it is desired to make the rise time minimized without timing and data transfer errors. In this paper, three servo systems including the take-up and supply reel servos for tape tension control and capstan servo for speed control are considered. So, tape transport mechanisms can be described with a nonlinear multi-input multi-output system (MIMO). After state-space representation of the problem, feedback control is designed for tracking objective. It should be mentioned that an increase in the speed of time response of system corresponds to an... 

This article proposes a blind discrete wavelet transform-discrete cosine transform (DWT-DCT) composite watermarking scheme that is robust against print and scan distortions. First, two-dimensional DWT is applied to the original image to obtain the mid-frequency subbands. Then, a one-dimensional DCT is applied to the selected mid-frequency subbands to extract the final coefficients for embedding the watermark. To specify watermarking parameters, we utilize a Genetic Algorithm to achieve a predefined image quality after watermark insertion. Suitable locations for watermarking are determined by analyzing the effect of a modeling algorithm. This model simulates noise and nonlinear attacks in... 

In economic design of profiles, parameters of a profile are determined such that the total implementation cost is minimized. These parameters consist of the number of set points, n, the interval between two successive sampling, h, and the parameters of a control chart used for monitoring. In this paper, the Lorenzen-Vance cost function is extended to model the costs associated with implementing profiles. The in-control and the out-of-control average run lengths, ARL0 and ARL1, respectively, are used as two statistical measures to evaluate the statistical performances of the proposed model. A genetic algorithm (GA) is developed for solving both the economic and the economic-statistical... 

Most of industrial applications of statistical process control involve more than one quality characteristics to be monitored. These characteristics are usually correlated, causing challenges for the monitoring methods. These challenges are resolved using multivariate quality control charts that have been widely developed in recent years. Nonetheless, multivariate process monitoring methods encounter a problem when the quality characteristics are of the attribute type and follow nonnormal distributions such as multivariate binomial or multivariate Poisson. Since the data analysis in the latter case is not as easy as the normal case, more complexities are involved to monitor multiattribute... 

This paper presents a robust decentralized proportional-integral (PI) control design as a solution of the load frequency control (LFC) in a multi-area power system. In the proposed methodology, the system robustness margin and transient performance are optimized simultaneously to achieve the optimum PI controller parameters. The Kharitonov's theorem is used to determine the robustness margin, i.e., the maximal uncertainty bounds under which the stable performance of the power system is guaranteed. The integral time square error (ITSE) is applied to quantify the transient performance of the LFC system. In order to tune the PI gains, the control objective function is optimized using the... 

A fractional order PID controller is designed to stabilize fractional delay systems with commensurate orders and multiple commensurate delays, where the time delays in the system may belong to several distinct intervals. Moreover, the controller parameters should belong to given intervals. In order to stabilize the system, the D-subdivision method is employed to choose the stabilizing set of the controller parameters from their available values. Furthermore, the nearest values of the obtained stabilizing set to their mean values are selected as the controller parameters so that a non-fragile controller is concluded. Two numerical examples evaluate the proposed control design method  

Dictionary learning (DL) for sparse representation has been widely investigated during the last decade. A DL algorithm uses a training data set to learn a set of basis functions over which all training signals can be sparsely represented. In practice, training signals may contain a few outlier data, whose structures differ from those of the clean training set. The presence of these unpleasant data may heavily affect the learning performance of a DL algorithm. In this paper we propose a robust-to-outlier formulation of the DL problem. We then present an algorithm for solving the resulting problem. Experimental results on both synthetic data and image denoising demonstrate the promising... 

The practicality of robust model predictive control of systems with model uncertainties depends on the time consumed for solving a defined optimization problem. This paper presents a method for the computational complexity reduction in a robust model predictive control. First a scaled state vector is defined such that the objective function contours in the defined optimization problem become vertical or horizontal ellipses or circles, and then the control input is determined at each sampling time as a state feedback that minimizes the infinite horizon objective function by solving some linear matrix inequalities. The simulation results show that the number of iterations to solve the problem... 

Design and control of micro robots have been one of the interesting fields in robotics in recent years. One class of these micro robots is the legged robots. Various designs of legged robots have been proposed in the literature. All designs rely on friction for locomotion. In this paper dynamic model of a planar two-legged micro robot is presented using Luger friction model, and an adaptive neural controller used to control the robot to improve robustness and velocity of the robot. As mentioned earlier, friction plays an important role in locomotion of the legged robots. However, especially in legged micro robots, it is difficult to model the frictional force correctly since environmental... 

Long-span bridges usually experience different input excitations at their ground supports that emanate from differences in wave arrival times, and soil conditions, as well as loss of coherency in arriving waves. These spatial variations can drastically influence the dynamic response; hence, this phenomenon must be considered in any vibration-based identification method. There are numerous Multi-Input Multi-Output (MIMO) identification techniques that may be applied to data recorded at long-span bridges that experience spatial variations in their input motions. However, inertial soil-structure interaction effects severely reduce the accuracy of these techniques because the actual Foundation... 

This paper considers a closed-loop system consisting of a fractional/integer order system and a fractional PID controller. Assuming that the uncertain coefficients of the fractional PID controller lie in some known intervals independently (i.e. that controller is a member of an interval family), the paper presents some easy to use theorems to investigate the robust bounded-input bounded-output stability of the resultant closed-loop system. Moreover, a finite frequency bound required in drawing the related graphs has also been provided. Finally, some numerical examples are presented to illustrate the results  

A new approach is developed in this paper to detect general mean shifts of multivariate quality control systems and to determine the quality characteristic(s) responsible for the shift. This approach takes advantage of both a decomposition method and an EWMA-based control statistics that are employed for multivariate normal distributions. In order to evaluate the performance of the proposed methodology, simulation studies are provided to estimate the in- and out-of-control average run lengths under different mean and variance shift scenarios. Simulation experiments are also given to compare the performances of the proposed procedure with the ones of the well-known MEWMA and MCUSUM methods.... 

Offline procedures for estimating parameters of robot dynamics are practically based on the parameterized inverse dynamic model. In this paper, we present a novel approach to parameter estimation of robot dynamics which removes the necessity of parameterization (i.e. finding the minimum number of parameters from which the dynamics can be calculated through a linear model with respect to these parameters). This offline approach is based on a simple and powerful swarm intelligence tool: the particle swarm optimization (PSO). In this paper, we discuss and validate the method through simulated experiments. In "Part Two" we analyze our method in terms of robustness and compare it to robust... 

In this research, the main parameters of the multivariate cumulative sum (CUSUM) control chart (the reference value k, the control limit H, the sample size n and the sampling interval h) are determined by minimising the Lorenzen-Vance cost function [Lorenzen, T.J., and Vance, L.C. (1986), The Economic Design of Control Charts: A Unified Approach, Technometrics, 28, 3-10], in which the external costs of employing the chart are added. In addition, the model is statistically constrained to achieve desired in-control and out-of-control average run lengths. The Taguchi loss approach is used to model the problem and a genetic algorithm, for which its main parameters are tuned using the response... 

In this paper, a novel decentralized adaptive control scheme for multiagent formation control is proposed based on an integration of artificial potential functions with robust control techniques. Fully actuated mobile agents with partially unknown models are considered, where an adaptive fuzzy logic system is used to approximate the unknown system dynamics. The robust performance criterion is used to attenuate the adaptive fuzzy approximation error and external disturbances to a prescribed level. The advantages of the proposed controller can be listed as robustness to input nonlinearity, external disturbances, and model uncertainties, and applicability on a large diversity of autonomous... 

The problem of tuning a two-parameter controller has been formulated as finding the centroid of the admissible region specified by the set of constraints that the controller should satisfy. The constraints can be as general as the closed-loop system stability or they may include several requirements on various stability, sensitivity, or performance measures. The design of stabilizing proportional-derivative (PD) controllers using the centroid of the stability region in the controller parameter space is considered as a case study. To this end, analytical formulas are derived to describe the stability boundaries of a class of integrating time delay systems, the stability region of which has a... 

Shewhart charts are the most popular control charts that can be used to monitor variable quality characteristics in a production process. In this paper, a multi-objective model of the economic statistical design of the X-bar control chart is first proposed by incorporating the Taguchi loss function and the intangible external costs. The model minimizes the mean hourly loss cost while minimizing out-of-control average run length and maintaining reasonable in-control average run length. A multiobjective evolutionary algorithm, namely NSGA-II, is then developed and used to obtain the Pareto optimal solution of the model. Some sensitivity analyses are next performed to investigate the effect of... 

A novel intelligent semi-active control system for an eleven degrees of freedom passenger car's suspension system using magnetorheological (MR) damper with neuro-fuzzy (NF) control strategy to enhance desired suspension performance is proposed. In comparison with earlier studies, an improvement in problem modeling is made. The proposed method consists of two parts: a fuzzy control strategy to establish an efficient controller to improve ride comfort and road handling (RCH) and an inverse mapping model to estimate the force needed for a semi-active damper. The fuzzy logic rules are extracted based on Sugeno inference engine. The inverse mapping model is based on an artificial neural network... 

In this paper, an algebraic tuning rule is presented for fractional PI controllers to control first order plus dead-time processes. By using the performance map (PM) method, this tuning rule is derived in order to set the gain margin of the control system close to 3 and the phase margin close to 60 degrees. The robustness and performance of this tuning rule are compared with some well-known PI tuning rules. Simulation results are brought to demonstrate the effectiveness and robustness of this tuning formula against process dynamic uncertainties in comparison with the other tuning methods