Sharif Digital Repository

Identification and minimization of error sources are important issues in experimental investigations. Mainly in micro-scale problems, precise settings should be applied to high-tech test beds to reduce disturbance and induced motion. An experimental study is conducted to assess the role of induced forces and velocity fields in a particulate system used for particle identification and separation. Two main effects caused by disturbances are sampling errors and induced motion in the channel, either on fluid or dispersed phases. Different disturbance scenarios are implemented on the test bed and then the system response is reported. In order to assess induced motion as a result of applied... 

Particle manipulation using laser beam is almost a new and contactless technique in particulate sciences. The method is based on the radiation pressure of light photons on the particles suspended in a semi-transparent fluid. Applications of the technique mainly cover microscopic separation and detection of biological objects. In this work, a theoretical study is conducted to investigate the hydrodynamic and thermal effects on a particulate flow in a mini-channel. Laser thermal effects are studied as a result of light absorption either in fluid or dispersed phase. An analytical model is developed to be the real simulator of a test bed developed by the authors. The main objective of performed... 

Optical separation, which is a contactless and accurate technique, has been mostly used to manipulate single particles. This work mainly aims to present an effective technique for optical propulsion and separation of a group of microscopic particles that are suspended in liquids. An experimental study is conducted to assess the effect of radiation pressure of a high-power laser on a dilute dispersion of microparticles in water using microscopic image analysis. Results of separation experiments indicate that the manipulation mechanism is capable of sorting the microscopic particles in two size classes. Compared to common optical separators, this configuration has a benefit of separating many... 

Optical propulsion via laser source is a relatively new and non-contact tool for manipulation of microscopic objects. The method is based on the radiation pressure of light photons on the micron sized particles. Applications of the technique mainly cover microscopic separation, purification and cellular studies. Due to high power intensity of laser beams, absorption of light may result in heating and damage of objects to be manipulated. In addition, the difference between heated and cold zones can lead to a naturally driven flow around the objects. So precisely controlled conditions should be set up to avoid thermal effects. In this work, a theoretical study is conducted to investigate the... 

Hydrodynamically fully developed flow of power-law fluids under combined action of electroosmotic and pressure gradient forces in rectangular microreactors is analyzed considering heterogeneous catalytic reactions. The Poisson-Boltzmann, Cauchy momentum, and concentration equations are considered in two dimensions and after being dimensionless are numerically solved applying a finite difference algorithm. Variation of axial concentration gradient, and axial and horizontal mass diffusions are taken into account as well. To accomplish a more general analysis, the velocity distribution is obtained by solving continuity and Cauchy momentum equations and is not considered as an average axial... 

Electroosmosis is the main mechanism for flow generation in lab-on-a-chip (LOC) devices. The temperature rise due to the Joule heating phenomenon, associated with the electroosmosis, may be detrimental for samples being considered in LOCs. Hence, a complete understanding of the heat transfer physics associated with the electroosmotic flow is of high importance in design and active control of LOCs. The objective of the present study is to estimate the temperature rise and the thermal entry length in electroosmotic flow through rectangular microchannels, having potential applications in LOC devices. Along this line, the power-law rheological model is used to account for non-Newtonian behavior... 

The present study considers both the hydrodynamic and thermal characteristics of combined electroosmotic and pressure driven flow in a microannulus. Analytical solutions are presented using the Debye-Hückel linearization along with the uniform Joule heating and negligible viscous dissipation assumptions, whereas exact results are achieved numerically. Here, the range of validity for the Debye-Hückel linearization is found to be about two times of that for a parallel plate microchannel. Accordingly, this linearization may successfully be used to evaluate the potential and velocity distributions up to the zeta potentials of 100 mV, provided that the dimensionless Debye-Hückel parameter is... 

This study presents a comprehensive investigation on hydrodynamic and thermal transport properties of mixed electroosmotically and pressure driven flow in microtubes. Particular emphasis is given to investigating the combined consequences of viscous dissipation, non-uniform Joule heating, and variable thermophysical properties. Analytical solutions are obtained using the Debye-Hückel linearization and constant fluid properties assumption, while a numerical solution is presented for variable fluid properties and non-uniform distribution of Joule heating. The results indicate that, viscous heating effect is pronounced significantly when a favorable pressure gradient exists and cannot be... 

In this paper, the fully developed electroosmotic flow of power-law fluids in rectangular microchannels in the presence of pressure gradient is analyzed. The electrical potential and momentum equations are numerically solved through a finite difference procedure for a non-uniform grid. A complete parametric study reveals that the pressure effects are more pronounced at higher values of the channel aspect ratio and smaller values of the flow behavior index. The Poiseuille number is found to be an increasing function of the channel aspect ratio for pressure assisted flow and a decreasing function of this parameter for pressure opposed flow. It is also observed that the Poiseuille number is... 

In the present study, the thermal characteristics of electroosmotic flow of power-law fluids in rectangular microchannels in the presence of pressure gradient are investigated. The governing equations for fully developed flow under H1 thermal boundary conditions are first made dimensionless and subsequently solved through a finite difference procedure for a non-uniform grid. The influence of the major parameters on thermal features of the flow such as the temperature distribution and Nusselt number is discussed by a complete parametric study. The results reveal that the channel aspect ratio and the non-Newtonian characteristic of the fluid can affect the thermal behavior of the flow. It is... 

Electroosmosis is the predominant mechanism for flow generation in lab-on-chip devices. Since most biofluids encountered in these devices are considered to be non-Newtonian, it is vital to study the flow characteristics of common non-Newtonian models under electroosmotic body force. In this paper, the hydrodynamically fully developed electroosmotic flow of power-law fluids in rectangular microchannels is analyzed. The electrical potential and momentum equations are numerically solved through a finite difference procedure for a non-uniform grid. A thoroughgoing parametric study reveals that the Poiseuille number is an increasing function of the channel aspect ratio, the zeta potential, the... 

Pulsating heat pipes (PHPs) are simple, cheap, and efficient heat transfer devices. They have applications in electronic cooling. In the present research, an experimental investigation is conducted on startup and steady thermal performances of open loop pulsating heat pipes (OLPHPs). Effects of working fluid, heat input, non-condensable gases (NCGs), ferrofluid concentration, magnets location, and inclination angle on the thermal performance of OLPHPs have been considered. Obtained results show that using ferrofluid can improve the thermal performance in steady state condition. Furthermore, applying a magnetic field enhances the heat transfer characteristics of ferrofluidic OLPHPs in both... 

In the present research an experimental investigation is performed to explore the effects of working fluid, heat input, ferrofluid concentration, magnets location, and inclination angle on the thermal performance of an Open Loop Pulsating Heat Pipe (OLPHP). Obtained results show that using ferrofluid can improve the thermal performance and applying a magnetic field on the water based ferrofluid decreases the thermal resistance. It shows that at an inclination angle of the OLPHP to be zero, the thermal performance of the present OLPHP reduces. Best heat transfer capability was achieved at 67.5 degree relative to horizontal axis for all of working fluids. Variation of the magnets location... 

An experimental test bed based on single particle tracking techniques is employed in order to investigate the velocity domain, slip velocity, and settling distribution of micro-particles in low-Reynolds number poiseuille flow in converging–diverging microchannel. Three-dimensional velocity domain of particles are studied in the presence of walls and compared with the particle-free fluid. The results show that the velocity of particles moving near the side walls of microchannel decreases about 30 % compared to those moving at the centerline. Furthermore, the effects of converging–diverging geometry on sedimentation of micro-particles are considered. The results show an average decrease of... 

An experimental test bed based on single particle tracking techniques is employed in order to investigate the velocity domain, slip velocity, and settling distribution of micro-particles in low-Reynolds number poiseuille flow in converging–diverging microchannel. Three-dimensional velocity domain of particles are studied in the presence of walls and compared with the particle-free fluid. The results show that the velocity of particles moving near the side walls of microchannel decreases about 30 % compared to those moving at the centerline. Furthermore, the effects of converging–diverging geometry on sedimentation of micro-particles are considered. The results show an average decrease of... 

Cooling system is essential for high power fuel cells to maintain cells temperature in an acceptable limit. In this paper a suitable cooling system for the PEM fuel cell has been designed and optimized. The design includes the number of the cooling plates, the proper circuit of the cooling channels in the plates, the channel dimensions, the flow rate of the cooling fluid and its temperature. The optimization technique is minimization of the entropy generation through the cooling plates. The design of the cooling channels and plates is such that the plate temperature doesn't exceed from a desired temperature and the temperature variation in the plate becomes minimized. In this design, the... 

Thermopneumatic micropump is one type of positive displacement micropump, which has many applications due to its relatively large stroke volume, low working voltage, and simple fabrication in microscale. In this paper, a numerical study of heat transfer and fluid flow in a valveless thermopneumatically driven micropump is presented. For rectifying the bidirectional flow, a nozzle and a diffuser are used as the inlet and outlet channels of the chamber. Since the fluid flow is induced by the motion of a diaphragm, the numerical simulation includes fluid structure interaction, which requires applying a dynamic mesh. The domain of solution is divided into two sections; the actuator unit, which... 

In this study, a jet propulsion JP combustor is studied numerically to investigate the combustor wall temperature influences on the soot characteristics emitted at its exhaust. There are a number of ways to control the combustor wall temperatures benefiting from different wall cooling technologies. Irrespective of using different high technology cooling systems, it is important to recognize how the wall temperature can affect the soot emission from one specific JP engine. Before examining the main combustor, it is important to assess the accuracy of the computational fluids dynamics (CFD) tool via solving a benchmark problem. In this regard, the predicted flame structure for the benchmark... 

In this article, the induced airflow and the resultant particles resuspension due to a disk falling freely under the effect of gravity is studied using numerical and experimental approaches. The results showed that an axisymmetric vortex is generated on the disk tip as the disk falls and sheds after impacting the floor. While the effect of this ring vortex on the particles detachment from the floor is small, it has considerable influence on the dispersion of resuspended particles. The simulation results indicated that particles are mainly resuspended from an annular area beneath the disk tip where the generated wall shear is sufficiently high. As particles detachment is mainly controlled by... 

In the past two decades, microfluidic systems have become more appealing due to their wide applications in many areas, such as electronics, biotechnology, medicine, etc. Recently, the advantages of using the bubble growth phenomenon as a robust actuator in microfluidic devices have directed research interests towards the investigation of various applications. In this research, a new transient thermo-hydraulic model has been developed for bubble growth in confined volumes. The present model has been used to describe the pumping effect produced by the bubble growth and collapse phenomenon in microchannels. The results show relatively good agreement with experimental data. This study is useful...