Sharif Digital Repository

In this paper, a novel thermal microactuator is designed which is capable of producing bi-directional lateral and rotational output and one of its applications as a two DOF micromanipulator is shown. Also, by carefully choosing the doping level, temperature distribution is determined by considering the dependency of silicon's resistivity and conductivity to temperature. Using variable separation method an equation in terms of elliptic integrals is reached and after imposing boundary conditions the exact temperature distribution is obtained numerically. Currents at each branch is updated due to the last temperature distribution and this process is repeated several times until the final... 

A brass vortextube is used to carry out a series of experiments. The main objective of the present research is to investigate the separation performances of a vortex tube (VT) for a hydrocarbon mixture. Examination is also applied to study the effects of nozzle intakes number and cold fraction on the gas species separation at specific inlet pressure 236.37 kPa in a VT with two gas mixtures (LPG as a hydrocarbon mixture and LPG-N2). A two-dimensional computational fluid dynamic (CFD) model simulation of a VT is presented. CFD code after validation is also applied to investigate the role of cold fraction and nozzle intakes number on the gas species separation. The highly rotating flow field... 

A high silica CHA-type membrane was synthesized by the in-situ crystallization method on a disk like α-alumina porous support to separate both acid (H2S, CO2) gases from methane. The membrane showed a permeance of 3.39×10-8mol/m2sPa for pure CO2with CO2/CH4 ideal selectivity of 21.6 at 303K and 100kPa pressure difference across the membrane. The membrane was also tested with N2 and O2 pure gases indicating a small O2/N2 selectivity of 1.2-1.4, which shows that this type of membrane is not suitable for O2/N2 separation. The membrane performance was also analyzed by binary (CO2-CH4) and ternary (H2S-CO2-CH4) gas mixtures, with compositions near the real sour natural gas (CO2: 2.13mol%, H2S:... 

The purpose of this study is to investigate separation performance of poly(ether-b-amide6) (Pebax1657)/glycerol triacetate (GTA) gel membranes for CO2 removal from H2, N2 and CH4. GTA as a low molecular weight and highly CO2-phill compound was added to membrane structure at various weight fractions, 20%, 40%, 60% and 80% of Pebax, to fabricate a new high solubility selective membrane with improved performance. Permeation of pure gases was studied at different temperatures from 25 to 65°C and pressures from 4 to 24bar and ideal selectivities were calculated. Results indicated enhancement in permeation for all tested gases. For example, at a pressure of 4bar and a temperature of 25°C, membrane... 

A series of biodegradable acrylic terminated polyurethanes (APUs) based on poly(ε-caprolactone) diol (PCL), aliphatic 1,6-hexamethylene diisocyanate (HDI) and hydroxyethyl methyl acrylate (HEMA) was synthesized as potential materials for hard tissue biomedical applications. PCLs with low molecular weights of 1000 and 2000 g/mol were employed to provide different amounts of end capped urethane acrylate in APUs. To control crosslink density, a mixture of two different reactive diluents including mono-functional HEMA and bi-functional ethylene glycol dimethacrylate (EGDMA) with different weight ratios was incorporated into the APUs, called here PUAs. Morphological characteristics and mechanical... 

In order to simulate the performance of pure methane in chemical looping using iron-based oxygen carrier, simultaneously production of three pure streams of hydrogen, nitrogen and carbon dioxide has been investigated. For this purpose, proper operating conditions have been discussed for maximum production of hydrogen, complete consumption of oxygen of inlet air and complete combustion of methane. Professional software is used to simulate the chemical looping reactors and optimize their output streams. Results show that in this process each mole of methane fuel can produce 2.533, 2.65 and 0.99 mol of pure N 2, H2 and CO2, respectively which contributes 80.2% energy conversion of CH4 to H2.... 

Superparamagnetic ZnFe2O4/reduced graphene oxide (rGO) composites containing ZnFe2O4 nanoparticles (with ∼5-20 nm sizes) attached onto rGO sheets (with ∼1 μm lateral dimensions) were synthesized by hydrothermal reaction method. By increasing the graphene content of the composite from 0 to 40 wt%, the size as well as the number of the ZnFe2O4 nanoparticles decreased and the saturated magnetization of the composites reduced from 10.2 to 1.8 emu/g, resulting in lower responses to external magnetic fields. Concerning this, the time needed for 90% separation of ZnFe2O4/rGO (40 wt%) composite from its solution (2 mg/mL in ethanol) was found 60 min in the presence of an external magnetic field (∼1... 

Interesting properties of ionic liquids lead to their application as sub-component of membrane structures. Supported ionic liquid membranes (SILMs) are porous membranes whose pores are saturated with ionic liquids. Two ionic liquids, pr[mim]2[Tf2N]2 [1,3-di(3-methyl-imidazolium) propane bis(trifluoromethylsulfonyl) imide] and, h[mim]2 [Tf2N]2 [(1,6-di(3-methylimidazolium)hexane bis(trifluoromethylsulfonyl)imide)], were synthesized in our laboratory and stabilized on an alumina porous support. Permeability and permselectivity of carbon dioxide and methane using membranes containing these ionic liquids were then measured. The experiments were performed in the pressure range of 10-50kPa and... 

The details of the crystal structure of the recently discovered Y 3Ba5Cu8O18+δ (Y358) superconductor have been determined by ab initio density functional theory. Total energy calculation has been performed for three different suggested structures with different oxygen content. The structure with a center of inversion symmetry and the highest oxygen concentration has the lowest total energy. Thus, it is the best choice for the Y358 crystal structure. By investigating the detailed structure, it is seen that this compound is arranged either of YBa2Cu3O7 and YBaCu2O 5 or YBaCu2O5 and BaCuO2 substructural blocks in the c direction. The difference between the total energy of Y358 compound and the... 

To exert the optimum effect, the chemical exchange process to boron isotope separation was investigated. In this enrichment method the distillation of dimethyl ether-boron trifluoride complex, which was one of the most efficient industrial methods for purification of isotope boron-10, was optimized. In chemical exchange process of boron isotopes separation two chemical reactions occur. The first one is the decomposition reaction that is an endothermic reaction. The second one is the exchange reaction that is a pyrogenic reaction. With increasing temperature, the decomposition reaction is speeded while the exchange reaction is slowed down. Affecting on both decomposition and exchange... 

Titanium(IV) tetraisopropoxide was employed as a metal oxide sol-gel precursor to prepare ceramic composite nanofibers by the electrospinning system. To facilitate this process and obtain the desired nanofibers with higher aspect ratios and surface area, poly(vinylpyrrolidone) was added to the sol of titania. Four ceramic nanofibers sheets based on titania were prepared while each sheet contained different transition metals such as Fe-Mn, Fe-Ni, Fe-Co, and Fe-Mn-Co-Ni. The scanning electron microscope images showed good homogeneity for all the prepared ceramic composites with a diameter range of 100-250 nm. The sorption efficiency was investigated by a micro-solid-phase extraction setup in... 

In common catamaran vessels, demihulls are parallel to each other. In this paper, the total resistance of a catamaran vessel with non-parallel demihulls is investigated experimentally and numerically. Experiments are carried out at different Separation Ratios (S.R.), that is the ratio of fore to aft separation of the catamaran demihullsand also in two ratios of length to separation in amidships (L/Sm). The FLUENT solver, based on the Finite Volume Method (FVM), was used for numerical solution. Applying the VOF model, the free surface around the catamaran vessel and total resistance are calculated and compared with experimental results. Finally, the frictional resistance of the catamaran from... 

Phase separation is one of the common methods for fabrication of polymeric membrane, which classifies into the categories of Thermally Induced Phase Separation (TIPS) and Nonsolvent Induced Phase Separation (NIPS), i.e. heat and mass transfer induced phase separation, respectively. NIPS has been applied more commonly than TIPS, but the membranes which have resulted from this technique have macro finger-like voids, weak mechanical strength and not high separation ability in comparison with the TIPS. In contrast, membranes produced by the TIPS method have micro scale pores, high mechanical strength and also high separation capability, however, polymeric solutions prepared at high temperatures... 

Mixed matrix membranes of synthesized polyurethane (PU) based on toluene diisocyanate (TDI), polydimethylsiloxane (PDMS) and polytetramethylene glycol (PTMG) with polyvinyl alcohol based polar silica particles were prepared by solution casting technique. The homogeneity and thermal properties of the prepared PDMS-PU/silica membranes were characterized using scanning electron microscope (SEM), differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The SEM micrographs confirmed the distribution of silica particles in the polymer matrix without agglomerations. Gas permeation properties of membranes with different silica contents were studied for pure CO2, CH4, O2, He... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

During the year, due to weather conditions, the temperature fluctuations at surface level cause problems in underground pipes as a result of freezing water. One of the best prevention strategies is the use of polyurethane floor insulation for keeping the temperature of clay above zero degrees Celsius. In this study to calculate the minimum thickness of polyurethane insulation layer, the differential equation of energy is solved based on principle of separation of variables using imaginary eigenvalues for consistency with the temperature distribution in multi-layer consist of asphalt, gravel and polyurethane with finite thickness and clay as a semiinfinite medium with periodic thermal... 

Brain-machines - also termed neural prostheses, could potentially increase substantially the quality of life for people suffering from motor disorders or even brain palsy. In this paper we investigate the non-stationary continuous decoding problem associated to the rat's hand position. To this aim, intracortical data (also named ECoG for electrocorticogram) are processed in successive stages: spike detection, spike sorting, and intention extraction from the firing rate signal. The two important questions to answer in our experiment are (i) is it realistic to link time events from the primary motor cortex with some time-delay mapping tool and are some inputs more suitable for this mapping... 

In this article, a genetic algorithm is used to optimize the separator pressures in a multistage crude oil and multistage gas condensate production unit with four and three separators respectively. This leads to the generation of more accurate results for the quality and quantity of oil remaining in the stock tank for both crude oil and gas condensate production units. Genetic-based optimized pressures for crude oil separators resulted in 1.8% and 2% enhancement in oil remaining in the stock tank for summer and winter respectively. API gravity of the stock tank oil was improved 2.4% in summer and 2.2% in winter. For the gas condensate production unit, optimized pressures can enhance by 8.6%... 

Internet traffic classification is important in many aspects of network management such as data exploitation detection, malicious user identification, and restricting application traffic. Previously, features such as port and protocol numbers have been used to classify traffic, but these features can now be changed easily, making their use in traffic classification inadequate. Consequently, traffic classification based on machine learning (ML) is now employed. The number of features used in an ML algorithm has a significant impact on performance, in particular accuracy. In this paper, a minimum best feature set is chosen using a supervised method to obtain uncorrelated features. Outlier... 

Solution processed graphene variants including graphene oxide (GO) and reduced graphene oxide (RGO) are promising materials for potential optoelectronic applications. To date, efficiency of the excitation energy transfer into GO and RGO thin layers has not been investigated in terms of donor-acceptor separation distance. In the present work, we study nonradiative energy transfer (NRET) from CdSe/CdS quantum dots into single and/or double layer GO or RGO using time-resolved fluorescence spectroscopy. We observe shorter lifetimes as the separation distance between the QDs and GO or RGO decreases. In accordance with these lifetimes, the rates reveal the presence of two different mechanisms...