Sharif Digital Repository

The present study proposes an exact solution for the release kinetic of a solute from inside a hollow cylindrical polymeric matrix into an infinite medium when the initial concentration of the solute (A) is greater than the solubility limit (Cs). A combination of analytical and numerical methods was used to calculate the solute concentration profile and the release rate. The model was developed for two different conditions including: (1) The release medium was flowing through the hollow cylinder in which the boundary layer may be neglected, and (2) The release medium inside the hollow cylinder was stagnant where the boundary layer needed to be considered. The results indicated that the... 

Field evidence indicates that the thermal and chemical regimes in wellbore considerably affect the wellbore stability. This study presents a general coupled model for transport of solute, solvent and heat including their combined effects on the wellbore stability. Optimization of drilling fluid parameters is crucial for wellbore stability analysis particularly in high pressure-high temperature environments. The coupled effects of chemical potential and temperature gradients on fluid flow significantly change the pore pressure and stress around a borehole. The effects of various parameters such as mud weight, solute concentration gradient, shale properties, and temperature gradient on... 

SiBNC nanofibers were synthesized through the polymeric route by a one-pot synthesis approach. DMTA (dichloroboryl methyl trichlorosilyl amine) polymer was selected as pre-ceramic for SiBNC, which was shaped into nanofibers by electrospinning. Then, the nanofibers were cured in an inert atmosphere in order to obtain the final ceramic. By changing the curing atmosphere, the compound of final ceramic has been manipulated. In addition, the ceramic yield of DMTA as a preceramic was increased in the nitrogen atmosphere. The effects of applied voltage, solution concentration, and feeding rate on the morphology of final electrospun ceramic nanofibers were also investigated. Final ceramic remains... 

We study the hydrodynamic dispersion (HD) by electroosmotic flow in soft microchannels. Considering a fully developed flow in a slit microchannel of low surface potential and adopting the Taylor dispersion theory, we derive analytical solutions for the solute concentration field and the effective dispersion coefficient. We also conduct numerical analyses to broaden the paper's scope to high surface potentials and to specify a criterion for the validity of the Debye-Hückel linearization in soft microconduits as well as to investigate the broadening of an analyte band from the time of injection. It is demonstrated that the effective dispersion coefficient of a neutral solute band is generally... 

A numerical model has been developed for the determination of liquid flow permeability through columnar dendrite during growth and segregation in Al-Si mushy alloys. The model is inclusive of two stages, first numerical evolution of the dendrite shape during growth, and second numerical determination of the permeability. Simulation results shown which Si concentration by transform of dendrite shape dendrite could reduce of the interdendritic liquid permeability. © 2005 Elsevier Ltd. All rights reserved  

Clay liners are widely used as porous membrane barriers to control solute transport and to prevent the leakage of leachate both in horizontal and vertical flow scenarios, such as the isolated base and ramps of sanitary landfills. Despite the primary importance of saturated hydraulic conductivity in a reliable simulation of fluid flow through clay barriers, there is no model to predict hydraulic conductivity of clayey soils permeated with saline aqueous solutions because most of the current models were developed for pure water. Therefore, the main motivation behind this study is to derive semi-empirical models for simulating the hydraulic conductivity of clayey soils in the presence of... 

Biocompatible porous polymeric scaffolds provide a suitable environment for proliferation of stem cells in human body. In this research work, porous gelatin–poly(ethylene glycol), PEG, based scaffolds were prepared using combination of freeze-gelation and freeze-extraction methods. Effects of various parameters such as freezing temperature, cross-linking agent, concentrations of gelatin and PEG and their blending ratio on physical and mechanical properties, swelling ratio, porosity, pore size, and degradation rate of scaffolds were investigated. Also, proliferation of fibroblast skin cells on the scaffolds was examined by MTS assay to assess the suitability of the scaffolds in wound healing... 

Foams for biomedical applications were made from polyvinyl alcohol, polyvinyl alcohol / polyvinyl pyrrolidone blend and their nanocomposites with nanoclay by clean processes. Air was entrapped into the aqueous polymer solutions during vigorous mixing and then the solutions were freeze-dried. The foams structure was stabilized by crosslinking via gamma irradiation without using any harmful chemicals. The hydrophilic biocompatible foams possessed interconnected open cell structure with remarkable capacity to absorb and retain water. The foams in wet state were soft and flexible. Desirable pore structure and higher water absorption was obtained at a solution concentration of 5 wt% for both... 

A highly efficient polybutylene terephthalate (PBT)-based nanocomposite containing nickel oxide nanoparticles was synthesized by electrospinning technique and used as a fiber coating for solid phase microextraction. The influential morphological parameters and capability of the prepared nanocomposite including the NiO content, the coating time, the PBT concentration and applied voltage were considered for optimization. The applicability of the synthesized fiber coating was examined by headspace solid phase micro extraction and gas chromatography mass spectrometry detection of some volatile organic compounds in aqueous samples. Among the synthesized nanocomposites and pristine PBT nanofibers,... 

Thin film composites (TFCs) as forward osmosis (FO) membranes for seawater desalination application were prepared. For this purpose, polyacrylonitrile (PAN) as a moderately hydrophilic polymer was used to fabricate support membranes via nonsolvent-induced phase inversion. A selective thin polyamide (PA) film was then formed on the top of PAN membranes via interfacial polymerization reaction of m-phenylenediamine and trimesoyl chloride (TMC). The effects of PAN solution concentration, solvent mixture, and coagulation bath temperature on the morphology, water permeability, and FO performance of the membranes and composites were studied. Support membranes based on low PAN concentrations (7 wt... 

Graphene oxide platelets synthesized by using a chemical exfoliation method were deposited on anatase TiO2 thin films. Postannealing of the graphene oxide/TiO2 thin films at 400 °C in air resulted in partial formation of a Ti-C bond between the platelets and their beneath thin film. By using atomic force microscopy and X-ray photoelectron spectroscopy analyses, UV-visible light-induced photocatalytic reduction of the graphene oxide platelets of the annealed graphene oxide/TiO2. thin films immersed in ethanol was studied for the different irradiation times. After 4 h of photocatalytic reduction, the vertical space between the platelets decreased from about 1.1 to less than 0.8 nm and the... 

In this study, a series of highly swelling hydrogels based on sodium alginate (NaAlg) and polymethacrylamide (PMAM) was prepared through free radical polymerization. The graft copolymerization reaction was performed in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator and N,N'-methylenebisacrylamide (MBA) as a crosslinker. The crosslinked graft copolymer, alginate-graft-polymethacrylamide (Alg-g-PMAM), was then partially hydrolyzed by NaOH solution to yield a hydrogel, hydrolyzed alginate-graft-polymethacrylamide (H-Alg-g-PMAM). During alkaline hydrolysis, the carboxamide groups of Alg-g-PMAM were converted into hydrophilic carboxylate anions. Either the... 

Concentration procedures have always been implemented when trace analysis of compounds in real matrices is contemplated. A variety of concentration strategies have been reported aiming at decreasing the limits of detection (LODs). The optical concentration of the substance in solution is one of the novel concepts for the enhancement of the analytical sensitivity. In this study, the optical concentration has been measured by the trapping of gold nanoparticles ((Formula presented.) nm) dispersed in water at low-concentrations at the focal volume of the laser beam. The influence of factors such as the time of gold nanoparticle trapping, the size of the nanoparticles, the intensity of the laser... 

Understanding diffusion-induced isothermal solidification time during transient liquid phase bonding is vital in producing intermetallic-free robust joints. The isothermal solidification completion time is overestimated by the existing analytical models, even by the closest one to the real bonding conditions, known as the moving interface model. It was found that the boride formation in the diffusion affected zone of Ni-based superalloy upon using B-containing filler metals is one of the reasons behind the inability of the moving interface model to predict the isothermal solidification completion time accurately, which has received scant attention in the literature. Moreover, simplified... 

Asphaltene deposition in the early stage of the oil reservoir life and later during any stimulation process emerges critical problems to the petroleum industry. Deposition of asphaltene aggregates raises strict problems in industries and demands markedly a practical and scientific knowledge of the mechanisms of aggregation and precipitation. Fluorescence emission spectroscopy has been widely used to illuminate the fundamental properties of crude oils and asphaltenes. It proposes analysis of some details of equilibrium, dynamic behavior, and aggregation composition of crude oil under specific condition. In this work, the fluorescence spectra of crude-oil extracted asphaltene samples were... 

In this paper, a size-dependent Timoshenko beam is developed on the basis of the couple stress theory. The couple stress theory is a non-classic continuum theory capable of capturing the small-scale size effects on the mechanical behavior of structures, while the classical continuum theory is unable to predict the mechanical behavior accurately when the characteristic size of structures is close to the material length scale parameter. The governing differential equations of motion are derived for the couple-stress Timoshenko beam using the principles of linear and angular momentum. Then, the general form of boundary conditions and generally valid closed-form analytical solutions are obtained... 

Copper indium selenide CuInSe2(CISe) thin films were deposited by chemical spray pyrolysis (CSP) method of CuInS2(CIS) and subsequent selenization process. To study the effects of solution concentration, we prepared different precursors solution of CIS including different amount of indium salts from 0.025 to 0.100 M with In/Cu 1.25 and S/In 4. These results propose that solution concentration is critical for inflecting the morphological, optical, electrical, and electrochemical characteristics of solution-processed CISe films and device performance. The studied morphological properties of deposited samples were homogenous, crack-free with large grains in indium salt concentrations more than... 

Copper indium selenide CuInSe2(CISe) thin films were deposited by chemical spray pyrolysis (CSP) method of CuInS2(CIS) and subsequent selenization process. To study the effects of solution concentration, we prepared different precursors solution of CIS including different amount of indium salts from 0.025 to 0.100 M with In/Cu 1.25 and S/In 4. These results propose that solution concentration is critical for inflecting the morphological, optical, electrical, and electrochemical characteristics of solution-processed CISe films and device performance. The studied morphological properties of deposited samples were homogenous, crack-free with large grains in indium salt concentrations more than... 

Laboratory investigation on the influence of solute concentration on the soil water-retention curve (SWRC) and volumetric behaviour of expansive soils has received much attention in recent years due to increasing environmental pollution. However, most studies only considered applying wetting or drying path with almost no attention to hydraulic hysteresis. Furthermore, these studies have focused on examining expansive soils and only marginal effort has been devoted to collapsible soils. Therefore, the main objective of this study is to systematically explore the SWRC and shrinkage characteristics of an artificially made collapsible soil at various molar concentrations. The tests were... 

The biofluids being manipulated in lab-on-a-chip devices usually contain elastic macromolecules. Accordingly, for an accurate modeling of the relevant flow physics one should invoke viscoelastic constitutive equations. In this paper, attention is paid toward the hydrodynamic dispersion by the fully developed electroosmotic flow of PTT viscoelastic fluids in slit microchannels of low zeta potential. Adopting the Taylor–Aris approach, analytical solutions are derived for late-time solute concentration and effective dispersion coefficient. Finite element-based numerical simulations are also conducted to monitor the broadening of an analyte band from the moment of injection. Both approaches are...