Sharif Digital Repository

Uncoordinated adoption of plug-in electric vehicles (PEVs) imposes further load on the distribution network, and therefore may result in disruptive impacts on the grid. Transactive coordination of PEVs has been introduced as an effective approach to mitigate these negative consequences. This paper furthers efforts enabling PEVs to participate in a real-time retail electricity market under a transactive energy (TE) paradigm. In this regard, PEV owners will estimate their willingness to pay/accept using a user-friendly strategy and submit the estimated values to the retail market operator. Then using a network-constrained market clearing mechanism, the clearing prices, i.e., dual variables of... 

Secure operation of protective intelligent electronic devices (IEDs) has been recognized as a crucial issue for power grids. By gaining access to substation IEDs, intruders can severely disrupt the operation of protection systems. This paper develops an analytical reliability assessment framework for quantifying the impacts of the hypothesized integrity attacks against protection systems. Petri net models are used to simulate possible intrusion scenarios into substation networks. The cyber network model is constructed from firewall, intrusion prevention system (IPS), and password models, which are three types of defense mechanisms for protecting substation networks. In this paper, two main... 

The high penetration of residential air conditioners (RACs) poses a growing concern in emerging fault-induceddelayed voltage recovery (FIDVR) in power systems. FIDVR is expected to be a significant threat to the stability and reliability offuture power grids. Hence, the system planners should carry out appropriate simulation studies to mitigate the severeconsequences of FIDVR events. A key question to implement these studies is how to determine the worst condition whichresults in FIDVR. Most of the actual FIDVR events have been experienced in the hot hours of the day and this issue makes onecurious to think about the relationship between the FIDVR events and the ambient temperature. In this... 

With high growth rate of demand for energy in different societies, the need for energy resources has been increased significantly. This has resulted in introduction of new energy resources, i. e. renewable energy resources in generation sector of energy systems. However, the intrinsic features of these energy resources call for higher flexibility in different sectors of energy systems. Flexibility in a comprehensive sense tries to cover the amount of imbalance between production and demand in energy systems. This paper has attempted to introduce the concept of operational flexibility in microgrids and it also has presented a step-by-step algorithm to assess this operational index based on a... 

In recent years, while energy consumption is still increasing, system peak load is decreasing due to deregulation in power systems, application of demand response programmes, microgrids and smart grids implementation, and so on. Thus, transmission system operators (TSOs), which are usually a public entity, must reinforce the transmission systems to maintain power system reliability. They are not interested in investing transmission network because of high investment costs. In this regard, this study presents a new bi-level model for co-planning of transmission system and merchant distributed energy resources (DERs). The upper level takes the TSOs perspective and aims to minimise the line... 

This paper provides a novel bad data detection processor to identify false data injection attacks (FDIAs) on the power system state estimation. The attackers are able to alter the result of the state estimation virtually intending to change the result of the state estimation without being detected by the bad data processors. However, using a specific configuration of an artificial neural network (ANN), named nonlinear autoregressive exogenous (NARX), can help to identify the injected bad data in state estimation. Considering the high correlation between power system measurements as well as state variables, the proposed neural network-based approach is feasible to detect any potential FDIAs.... 

Uncertainty and variability in the supply sector of renewable-penetrated power systems is becoming a new challenge for secure operation of these systems which if not responded properly may cause large amounts of load and supply curtailments. To meet this challenge, some ISOs recently have employed a new product named Flexible Ramping Product (FRP) into their markets which enhances the capability of the system to overcome such uncertainties by reserving additional ramp rates. In this regard, a new framework for implementing FRP in real-time market is proposed here. The proposed framework provides a proper opportunity for participation of thermal generating units in procuring FRP requirements.... 

This study presents a novel framework to incorporate the uncertainties associated with load fluctuations and components' availability in a day-ahead joint energy-reserve payment cost minimisation (PCM). The payments are calculated based on locational marginal prices (LMPs). Considering these uncertainties, appropriate definitions are not available for energy and reserve LMPs (RLMPs) that suit the probabilistic PCM formulation and reflect the market characteristics. A tri-level optimisation framework is proposed. The optimisation variables in the first-level optimisation include commitment status. In the second-level optimisation, the production schedule and allocated reserves are the... 

Nowadays, the energy storage systems (ESSs) are widely used in different level of power systems for dealing with the challenges caused by the integration of renewable energy sources (RESs). Among the ESSs, batteries are more suitable for being used in microgrids (MGs) at distribution level due to their special features. Therefore, this paper presents a novel approach for planning of distributed battery energy storage systems (BESSs) to enhance MGs operation, economically. The model is formulated as a mixed integer nonlinear programming problem (MINLP) and considers various types of BESSs. In order to verify the effectiveness of the proposed approach, it is applied to the IEEE 33-bus network... 

Optimal transmission switching (OTS) along with optimal bus-bar switching, also known as network topology optimization (NTO), has been previously proposed and utilized as a powerful tool to reduce operational costs. However, operational constraints and reliability considerations of NTO problem have not been addressed properly. In this paper, operational constraints are integrated in NTO problem and the effect of transmission network switching on expected interruption cost (EIC) is investigated. Moreover, a novel approach based on pool of solutions approach is presented, which can generate various switching scenarios. In doing so, the decision maker would be able to analyze and choose the... 

The main focus of this paper is to find an upgrade plan for a microgrid. This plan includes system lines' upgrades, the place, and size of the new capacitors and DERs. As usual, the planning process is begun with the load forecasting. The main objectives include minimization of system upgrade cost, loss cost, loss cost in peak load, and finally demand cost. The last objective is realized here using the tap changer of the main station transformer and reactive power support of the sources available or planned for the future of the grid. This is always referred to as the conservation of voltage reduction. In order to consider the effects of bus voltages on the system demand, the ZIP model for... 

The present context of the electric industry, characterized by competitive markets, privatization, and regulatory of technical requirements forces the power utilities to optimize their asset management practices and develop the requisite decision plans techno-economically. Practically approaching, this paper devises a new support tool based on a multiattribute decision making (MADM) framework in combination with analytical hierarchical process (AHP) to determine the most critical components of power transmission systems. Measure of system-wide reliability performance, outage cost, marginal clearing prices demonstrative of market fairness, and network losses are among the attributes... 

Development of design and production technology of centrifugal pumps for achieving better performance and less energy consumption in these devices has increasingly been taken into consideration. This is due to the fact that centrifugal pumps have an important contribution in industrial applications and energy consumption around the world. Accordingly, the international standards of centrifugal pumps, urge more precise analysis systems for obtaining the performance curves of these pumps. For this reason, a complete, precise and real-time monitoring and performance analysis system for centrifugal pumps is introduced in this paper. The pump characteristics are measured by precise measuring... 

Increasing redundant paths in transmission grids has always been thought to be a tool to enhance service reliability. However, network equations by intertwining power flows through redundant paths impose more limits on systems with more redundancy. Accordingly, autonomous removing of a few lines may relief capacity limit violations in some contingency events thereby enhancing service reliability. This paper aims to study impacts of manual removing of transmission lines on composite system reliability. For doing so, the existing model is extended to consider optimal transmission switching (OTS) as a remedial action. The model minimizes total damage cost imposed by load curtailments. The... 

Increasing redundant paths in transmission grids has always been thought to be a tool to enhance service reliability. However, network equations by intertwining power flows through redundant paths impose more limits on systems with more redundancy. Accordingly, autonomous removing of a few lines may relief capacity limit violations in some contingency events thereby enhancing service reliability. This paper aims to study impacts of manual removing of transmission lines on composite system reliability. For doing so, the existing model is extended to consider optimal transmission switching (OTS) as a remedial action. The model minimizes total damage cost imposed by load curtailments. The... 

The main focus of this study is on reserve market settlement in an electricity market with marginal pricing scheme as the pricing mechanism. Following a day-ahead market clearing, the marginal prices are found using the appropriate Lagrange multipliers as the bi-products of the optimisation process. The payments to energy and reserve providers can then be found based on these prices. However, it is hard to find an appropriate settlement scheme that provides the fair and justifiable consumer payments based on marginal pricing scheme considering the actual reserve functions in power systems. In this study, a reserve marginal pricing that is based on a proper reserve marginal price definition... 

There are different choices for auction and settlement mechanisms in electricity markets; however, selecting the appropriate mechanisms is too hard. Traditionally, the offer cost minimization (OCM) mechanism that minimizes the total offer cost is used as the clearing mechanism, and payments are calculated based on locational marginal prices (LMPs). Under this setup, the clearing and settlement mechanisms are inconsistent, since the minimized cost is different from the total payment cost. Some recent studies have proposed the payment cost minimization (PCM) mechanism. However, the discussion is still open, and different aspects of these mechanisms are yet needed to be analyzed. This paper... 

Uncertainties associated with bus loading and components' availability lead to uncertainties in different system variables based on the system physical and economical relationships. Line flows, bus voltages, different prices, and other variables and indices, such as available transfer capacity (ATC), are stochastic and cannot be expressed as a determined quantity. Traditionally, in order to model the stochastic nature of power systems, a stochastic power flow algorithm is used. In this paper, stochastic-algebraic method is applied to find the probability density function (pdf) of ATC. The algorithm linearizes the optimal power flow formulation and uses Gram-Charlier expansion to find the pdf... 

One of the most important issues in modal estimation of power systems using PMUs data is the negative effect of outliers. Hence, in addition to the techniques of analyzing PMUs data, the necessity of implementing some kinds of approach to overcome these outliers is tangible. This paper aims to present different approaches to overcome outliers and also estimate the electromechanical modes of the system accurately when there is suspicion that the PMUs data may be contaminated by discordant measurements. Proposed approaches are generally categorized into two main classifications: the first category detects and modifies outliers in the pre-processing stage adaptively and then prepares the... 

In this paper, the problem of placing a minimum number of phasor measurement units (PMUs) in a transmission system is considered so that faults on all lines of the network can be diagnosed and located irrespective of their locations. For this purpose, a PMU placement algorithm is applied to calculate the required data for impedance-based fault location of any fault line in the network, achieving the full potential of the circuit laws throughout the system. Another algorithm is then proposed to compute the voltage and current values of the fault line for fault-location purposes. Moreover, as many networks are already equipped with PMUs, the proposed algorithm makes it possible to locate...