Sharif Digital Repository

Thermodynamic modeling is known as a promising tool for phase behavior modeling of asphaltene precipitation under different conditions such as pressure depletion and CO2 injection. In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, while the oil and gas phases are modeled with an equation of state. The PR-EOS was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on an improved solid model has been developed and used for predicting asphaltene precipitation data for one of... 

Many reservoir and production engineers face asphaltene precipitation as a major problem during miscible carbon dioxide flooding projects. Experimental studies regarding asphaltene precipitation are therefore employed to assist in selecting appropriate facilities and proper operation schemes. During this study, a series of high pressure, high temperature experiments are designed and performed to analyze asphaltene precipitation behavior of an Iranian light reservoir crude at reservoir conditions due to natural production and miscible CO2 gas injection. For both sets of experiments, two different temperature levels (including reservoir temperature) are selected to investigate the role of... 

In this paper, thermo mechanical finite element analysis of orthogonal machining process with a flexible tool is carried out to study the dynamic behaviour of the machining system and its stability against chatter vibration. By combining the simulation of chip formation in metal cutting with the dynamic phenomena leading to chatter development, the influence of various phenomena, including thermal effects resulting from friction and plastic deformations on the stability of the process are investigated. The novelty of this model is in its ability to evaluate the effect of temperature rise in the cutting zone on the stability of cutting process. Process stability is analyzed and compared for... 

Thermodynamic modeling is known as a promising tool for phase behavior modeling of asphaltene precipitation under different conditions such as pressure depletion and CO2 injection. In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, while the oil and gas phases are modeled with an equation of state. The PR-EOS was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on an improved solid model has been developed and used for predicting asphaltene precipitation data for one of... 

Chatter vibration is a major cause of limitations in increasing material removal rate in machining. Machining chatter is caused by the interaction between tool and work-piece. Various nonlinear phenomena in the machining process affect the occurrence of chatter. Finite element simulation of chip formation allows for incorporation of various factors in the chip formation process. It can therefore be used to simulate the occurrence of chatter in practical conditions and to predict the conditions that lead to stable cutting. In this paper, a one degree of freedom dynamic model of the cutting tool is used to simulate the interaction of machining dynamics with the thermo-mechanical chip formation... 

In this study, tungsten oxide films were synthesized by pulsed laser deposition (PLD) method. The as-deposited films were annealed at a temperature of 250 and 350°C in air for 1 h. The surface morphology, microstructure, crystalline phase and chemical composition of the as-prepared and annealed films were characterized by SEM, XRD and XPS techniques, respectively. Deposition of Pd nanoparticles onto the tungsten oxide surface was performed by hydrogen reduction of a drop-drying PdCl 2 solution onto a WO 3 surface at 60°C. The influence of the annealing temperature on microstructure and gasochromic performance as well as the effect of operating temperature is presented in this work. Results... 

Optical propulsion via laser source is a relatively new and non-contact tool for manipulation of microscopic objects. The method is based on the radiation pressure of light photons on the micron sized particles. Applications of the technique mainly cover microscopic separation, purification and cellular studies. Due to high power intensity of laser beams, absorption of light may result in heating and damage of objects to be manipulated. In addition, the difference between heated and cold zones can lead to a naturally driven flow around the objects. So precisely controlled conditions should be set up to avoid thermal effects. In this work, a theoretical study is conducted to investigate the... 

Water molecules are one of the important molecules in nanofluidics. Its structure and its behavior can change with Temperature and cut-off distance parameters. In this study temperature and cut-off distance effects on the nano-scale water molecules behavior are investigated by molecular dynamics simulations. Many water molecular models have been developed in order to help discover the structure of water molecules. In this study, the flexible three centered (TIP3P-C) water potential is used to model the inter- and intramolecular interactions of the water molecules. In this simulation, we have been studied 512 water molecules with periodic boundary conditions and in a simulation box with 25... 

Blood vessels, especially large vessels have a greater thermal effect on freezing tissue during cryosurgery. Vascular networks act as heat sources in tissue, and cause failure in cryosurgery and reappearance of cancer. The aim of this study is to numerically simulate the effect of probe location and multiprobe on heat transfer distribution. Furthermore, the effect of nanoparticles injection is studied. It is shown that the small probes location near large blood vessels could help to reduce the necessary time for tissue freezing. Nanoparticles injection shows that the thermal effect of blood vessel in tissue is improved. Using Au, Ag and diamond nanoparticles have the most growth of ice ball... 

Nanocrystalline zinc titanate (ZnTiO3) thin films and powders with purity of 94% were produced at the low sintering temperature of 500 °C and the short sintering time of 1 h by a straightforward aqueous particulate sol-gel route. The effect of Zn:Ti molar ratio was studied on the crystallisation behaviour of zinc titanates. The prepared sols showed a narrow particle size distribution in the range 17-19 nm. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed that the powders contained mixtures of the rhombohedral-ZnTiO3, cubic-ZnO, cubic-Zn2TiO4 phases, as well as the anatase-TiO2 and the rutile-TiO2 depending on the sintering temperature and Zn:Ti molar ratio.... 

Graphene thin films with very low concentration of oxygen-containing functional groups were produced by reduction of graphene oxide nanosheets (prepared by using a chemical exfoliation) in a reducing environment and using two different heat treatment procedures (called one and two-step heat treatment procedures). The effects of heat treatment procedure and temperature on thickness variation of graphene platelets and also on reduction of the oxygen-containing functional groups of the graphene oxide nanosheets were studied by atomic force microscopy and X-ray photoelectron spectroscopy. While formation of the thin films composed of single-layer graphene nanosheets with minimum thickness of... 

Aero-thermoelastic analysis of a simply supported functionally graded truncated conical shell subjected to supersonic air flow is performed to predict the flutter boundaries. The temperature-dependent properties of the FG shell are assumed to be graded through the thickness according to a simple rule of mixture and power-law function of volume fractions of material constituents. Through the thickness steady-state heat conduction is considered for thermal analysis. To perform the stability analysis, the general nonlinear equations of motion are first derived using the classical Love's shell theory and the von Karman-Donnell-type of kinematic nonlinearity together with the linearized... 

A mathematical model based on Kocks-Mecking-Bergstrom model, has been proposed to predict the flow behavior of age hardenable aluminum alloys, under different conditions of solution heat treatment and hot deformation. Considering the published literature, most researchers have taken into account the precipitation and solution strengthening contribution to the flow stress by a constant and some others have ignored these effects. So these available descriptions cannot be applicable directly to different conditions of solution heat treatment. In order to enable these constitutive descriptions to take into account the effects of soaking time and temperature, we introduce in this research a... 

The concentration and temperature behaviors of the self-diffusion coefficient were analyzed in glycerol-water and methanol-water solutions using Diffusion-Ordered Spectroscopy (DOSY) experiment. Our results indicate that the self-diffusion coefficient dips with increasing concentration and decreasing temperature. The concentration behavior shows that there is hydrogen bond interaction between water and alcohol, which declines the self-diffusion coefficients of both in the aqueous binary mixtures. The self-diffusion activation energies were estimated 13.6, 29.4, and 32.8 (kJ/mol) for methanol and 24.8, 25.5, and 27.6 (kJ/mol) for water in the methanol-water solutions with 0.03, 0.10, and 0.20... 

A finite element analysis of a double layered shell with a circular hole is carried out with the computer aided engineering software Abaqus (Dassault Systèmes, FR). The model proposed has been used to perform a stress analysis on three pipes with different sized hole. Moreover, thermal expansion has been implemented in the testing. For the purpose of the research, the elastic properties of the materials have been considered and the results compared with the ones previously published in literature. The outcome of the investigation will benefit towards the design of optimal and sustainable pipes with circular cut outs  

A hot filament chemical vapor deposition (HFCVD) method was used to prepare Fe-Cr thin film on Si substrate. The produced layers were used as catalysts for growing carbon nanotubes (CNTs) from liquid petroleum gas (LPG) at 825 °C by thermal CVD (TCVD) method. To characterize the obtained catalysts or CNTs, X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Raman spectroscopy were used. CNTs were grown on HFCVD derived Fe-Cr catalyst with the LPG as carbon source successfully. It was found that an annealing process on catalysts enhances the surface concentration of Cr atoms and reduces the sizes of catalyst particles. The... 

We report experimental evidence of Cu surface segregation in Ni/Cu system, during deposition of Ni film onto Cu substrate at room temperature and during heat treatment in vacuum. Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS) by Tougaard's analysis results show that surface segregation defeats in competition with increase in Ni thickness and terminates when thickness of Ni increase to more than 4 nm. Surface energy and concentration were calculated using contact angle measurements and the results confirm that segregation reduces the surface energy. Surface segregation during heat treatment at 150-220 °C range as a function of time initially shows linear mass... 

Radial forging is one of the modern open die forging techniques and has a wide application in producing machine parts. During operation at high temperatures, severe temperature change associated with mechanical loads and the resultant wearing of the die surface lead to intense variation in strain on the die surface. Therefore, under this operating condition, thermo-mechanical fatigue (TMF) occurs on the surface of the radial forging die. TMF decreases the life of the die severely. In the present research, different layers were deposited on a 1.2714 steel die by SMAW and GTAW, with a weld wire of UDIMET 520. The microstructure of the radial forging die surface was investigated during welding... 

In precipitation hardenable materials, it is desirable to determine the precipitate dissolution temperature for homogenizing the microstructure by controlling the size and distribution of the precipitates. In this research, the influence of various heat treatment and hot deformation conditions on the kinetics of γ ′ dissolution and its morphological evolution in Nimonic 115 was studied. In addition, hot deformation behavior of the material was investigated using hot compression experiments at varying temperature (between 1,050°C and 1,175°C) and strain rates (between 0.01 and 1 s-1) up to a true strain of 0.8. The values obtained for the solvus temperature of γ ′ precipitates by two methods... 

The vibration analysis of rotating, functionally graded Timoshenko nano-beams under an in-plane nonlinear thermal loading is studied for the first time. The formulation is based on Eringen's nonlocal elasticity theory. Hamilton's principle is used for the derivation of the equations. The governing equations are solved by the differential quadrature method. The nano-beam is under axial load due to the rotation and thermal effects, and the boundary conditions are considered as cantilever and propped cantilever. The thermal distribution is considered to be nonlinear and material properties are temperature-dependent and are changing continuously through the thickness according to the power-law...